Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMK04803BISQE

Texas Instruments · Clock Generators / Frequency Synthesizers / PLL · WQFN-64-EP(9x9)

LMK04803BISQE from Texas Instruments, in a WQFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CLKout0 output Programmable clock output 0 (clock group 0).
2 CLKout0* output Complementary programmable clock output 0 (clock group 0).
3 CLKout1* output Complementary programmable clock output 1 (clock group 0).
4 CLKout1 output Programmable clock output 1 (clock group 0).
5 NC unconnected No connection; must be left floating.
6 SYNC bidirectional Programmable CLKout synchronization input or programmable status pin.
7 NC unconnected No connection; must be left floating.
8 NC unconnected No connection; must be left floating.
9 NC unconnected No connection; must be left floating.
10 Vcc1 power_in Power supply for the VCO LDO.
11 LDObyp1 passive LDO bypass, to be bypassed to ground with a 10 µF capacitor.
12 LDObyp2 passive LDO bypass, to be bypassed to ground with a 0.1 µF capacitor.
13 CLKout2 output Programmable clock output 2 (clock group 1).
14 CLKout2* output Complementary programmable clock output 2 (clock group 1).
15 CLKout3* output Complementary programmable clock output 3 (clock group 1).
16 CLKout3 output Programmable clock output 3 (clock group 1).
17 Vcc2 power_in Power supply for clock group 1 (CLKout2 and CLKout3).
18 Vcc3 power_in Power supply for clock group 2 (CLKout4 and CLKout5).
19 CLKout4 output Programmable clock output 4 (clock group 2).
20 CLKout4* output Complementary programmable clock output 4 (clock group 2).
21 CLKout5* output Complementary programmable clock output 5 (clock group 2).
22 CLKout5 output Programmable clock output 5 (clock group 2).
23 GND power_in Ground.
24 Vcc4 power_in Power supply for digital circuitry.
25 FBCLKin/Fin/CLKin1 input Feedback input for 0-delay mode, external VCO input (Fin) in external VCO mode, or reference clock input port 1 for PLL1; AC or DC coupled.
26 FBCLKin*/Fin*/CLKin1* input Complementary input of FBCLKin/Fin/CLKin1; AC or DC coupled.
27 Status_Holdover bidirectional Programmable status pin, default readback output; programmable as holdover mode indicator.
28 CLKin0 input Reference clock input port 0 for PLL1; AC or DC coupled.
29 CLKin0* input Complementary reference clock input port 0 for PLL1; AC or DC coupled.
30 Vcc5 power_in Power supply for clock inputs and OSCout1.
31 OSCout1 output LVPECL buffered output 1 of the OSCin port.
32 OSCout1* output Complementary LVPECL buffered output 1 of the OSCin port.
33 Status_LD bidirectional Programmable status pin, default lock detect for PLL1 and PLL2.
34 CPout1 output Charge pump 1 output for the PLL1 loop filter.
35 Vcc6 power_in Power supply for PLL1 and charge pump 1.
36 OSCin input Feedback to PLL1 and reference input to PLL2; AC coupled.
37 OSCin* input Complementary feedback to PLL1 and reference input to PLL2; AC coupled.
38 Vcc7 power_in Power supply for OSCin, OSCout0, and PLL2 circuitry.
39 OSCout0 output Programmable buffered output 0 of the OSCin port.
40 OSCout0* output Complementary programmable buffered output 0 of the OSCin port.
41 Vcc8 power_in Power supply for PLL2 and charge pump 2.
42 CPout2 output Charge pump 2 output for the PLL2 loop filter.
43 Vcc9 power_in Power supply for PLL2.
44 LEuWire input MICROWIRE latch enable input (CMOS).
45 CLKuWire input MICROWIRE clock input (CMOS).
46 DATAuWire input MICROWIRE data input (CMOS).
47 Vcc10 power_in Power supply for clock group 3 (CLKout6 and CLKout7).
48 CLKout6 output Programmable clock output 6 (clock group 3).
49 CLKout6* output Complementary programmable clock output 6 (clock group 3).
50 CLKout7* output Complementary programmable clock output 7 (clock group 3).
51 CLKout7 output Programmable clock output 7 (clock group 3).
52 Vcc11 power_in Power supply for clock group 4 (CLKout8 and CLKout9).
53 CLKout8 output Programmable clock output 8 (clock group 4).
54 CLKout8* output Complementary programmable clock output 8 (clock group 4).
55 CLKout9* output Complementary programmable clock output 9 (clock group 4).
56 CLKout9 output Programmable clock output 9 (clock group 4).
57 Vcc12 power_in Power supply for clock group 5 (CLKout10 and CLKout11).
58 CLKout10 output Programmable clock output 10 (clock group 5).
59 CLKout10* output Complementary programmable clock output 10 (clock group 5).
60 CLKout11* output Complementary programmable clock output 11 (clock group 5).
61 CLKout11 output Programmable clock output 11 (clock group 5).
62 Status_CLKin0 bidirectional Programmable status pin, default input for pin control of PLL1 reference selection; can also show CLKin0 LOS status.
63 Status_CLKin1 bidirectional Programmable status pin, default input for pin control of PLL1 reference selection; can also show CLKin1 LOS status.
64 Vcc13 power_in Power supply for clock group 0 (CLKout0 and CLKout1).
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-64-EP(9x9)
Category RTC/Clock Chip
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.3 3.6 V 6
Lead temperature (solder 4 seconds) TL 260 °C solder 4 seconds 6
Junction temperature TJ 150 °C 6
Storage temperature range Tstg -65 150 °C 6
Differential input current IIN -5 5 mA CLKinX/X*, OSCin/OSCin*, FBCLKin/FBCLKin*, Fin/Fin* 6
Junction temperature TJ 125 °C 6
Ambient temperature TA -40 25 85 °C VCC = 3.3 V 6
Supply voltage VCC 3.15 3.3 3.45 V 6
Power down supply current ICC_PD 1 3 mA No DC path to ground on OSCout1/1* 7
Supply current with all clocks enabled ICC_CLKS 505 590 mA All clock delays disabled, CLKoutX_Y_DIV = 1045, CLKoutX_TYPE = 1 (LVDS), PLL1 and PLL2 locked 7
Clock input frequency fCLKin 0.001 500 MHz CLKin0/0* and CLKin1/1* 7
Clock input slew rate SLEWCLKin 0.15 0.5 V/ns 20% to 80% 7
Differential input voltage (bipolar) VIDCLKin 0.25 1.55 /V/ AC coupled; CLKinX_BUF_TYPE = 0 (Bipolar) 7
Differential input voltage swing (bipolar) VSSCLKin 0.5 3.1 Vpp AC coupled; CLKinX_BUF_TYPE = 0 (Bipolar) 7
Differential input voltage (MOS) VIDCLKin 0.25 1.55 /V/ AC coupled; CLKinX_BUF_TYPE = 1 (MOS) 7
Differential input voltage swing (MOS) VSSCLKin 0.5 3.1 Vpp AC coupled; CLKinX_BUF_TYPE = 1 (MOS) 7
Single-ended input voltage (bipolar) VCLKin 0.25 2.4 Vpp AC coupled to CLKinX; CLKinX* AC coupled to ground; CLKinX_BUF_TYPE = 0 (Bipolar) 8
High input voltage VCLKin-VIH 2 V DC coupled to CLKinX; CLKinX* AC coupled to ground; max is VCC 8
Low input voltage VCLKin-VIL 0 0.4 V CLKinX_BUF_TYPE = 1 (MOS) 8
Clock input frequency (feedback) fFBCLKin 0.001 1000 MHz AC coupled (CLKinX_BUF_TYPE = 0); MODE = 2 or 8; FEEDBACK_MUX = 6 8
Clock input frequency (external VCO) fFin 0.001 3100 MHz AC coupled (CLKinX_BUF_TYPE = 0); MODE = 3 or 11 8
Clock input voltage (single ended) VFBCLKin/Fin 0.25 2 Vpp AC coupled (CLKinX_BUF_TYPE = 0) 8
Slew rate on clock input (feedback/Fin) SLEWFBCLKin/Fin 0.15 0.5 V/ns AC coupled; 20% to 80%; CLKinX_BUF_TYPE = 0 8
PLL1 phase detector frequency fPD1 40 MHz 8
PLL1 charge pump sink/source mismatch ICPout1%MIS 3 10 % VCPout1 = VCC/2, T = 25 °C 8
PLL1 charge pump TRI-STATE leakage current ICPout1TRI 5 nA 0.5 V < VCPout < VCC - 0.5 V 8
PLL2 reference input frequency (OSCin) fOSCin 500 MHz 9
PLL2 reference clock slew rate on OSCin SLEWOSCin 0.15 0.5 V/ns 20% to 80% 9
Input voltage for OSCin or OSCin* VOSCin 0.2 2.4 Vpp AC coupled; single-ended (unused pin AC coupled to GND) 9
Differential voltage swing OSCin VSSOSCin 0.4 3.1 Vpp AC coupled 9
Doubler input frequency fdoubler_max 155 MHz EN_PLL2_REF_2X = 1; OSCin duty cycle 40% to 60% 9
Crystal frequency range fXTAL 6 20.5 MHz RESR < 40 Ω 9
PLL2 phase detector frequency fPD2 155 MHz 9
PLL2 charge pump sink/source mismatch ICPout2%MIS 3 10 % VCPout2 = VCC/2, TA = 25 °C 9
PLL2 charge pump leakage ICPout2TRI 10 nA 0.5 V < VCPout2 < VCC - 0.5 V 10
VCO tuning range (LMK04803) fVCO 1840 2030 MHz LMK04803 10
Allowable temperature drift for continuous lock /ΔTCL/ 125 °C After programming R30 for lock, no changes to output configuration are permitted 10
Default output clock frequency at power on (CLKout8, LVDS) fCLKout-startup 69 77 87 MHz CLKout8, LVDS, LMK04803 10
Maximum frequency LVDS clock output fCLKout 1536 MHz RL = 100 Ω 12
LVDS differential output voltage VOD 250 400 450 /mV/ See Figure 5 12
LVDS differential output voltage swing VSS 500 800 900 mVpp See Figure 5 12
LVDS output offset voltage VOS 1.125 1.25 1.375 V RL = 100 Ω 12
Maximum frequency LVCMOS clock output fCLKout 250 MHz 5 pF load 13
LVCMOS output duty cycle DUTYCLK 45 50 55 % VCC/2 to VCC/2, FCLK = 100 MHz, T = 25 °C 13
LVCMOS output rise time TR 400 ps 20% to 80%, RL = 50 Ω, CL = 5 pF 13
Low-level output voltage (status/SYNC) VOL 0.4 V IOL = 500 µA 13
Low-level input voltage (MICROWIRE) VIL 0.4 V DIGITAL INPUTS (CLKuWire, DATAuWire, LEuWire) 13
High-level input voltage (MICROWIRE) VIH 1.6 V DIGITAL INPUTS (CLKuWire, DATAuWire, LEuWire); max is VCC 13
Junction-to-ambient thermal resistance (4-layer JEDEC PCB) RθJA 25.2 °C/W 7
Junction-to-case (top) thermal resistance RθJC(top) 6.9 °C/W 7
Junction-to-board thermal resistance RθJB 4 °C/W 7
Junction-to-case (bottom) thermal resistance RθJC(bot) 0.8 °C/W 7
PLL1 charge pump source current ICPout1SOURCE 100 µA VCPout1 = VCC/2, PLL1_CP_GAIN = 0 8
PLL1 charge pump source current ICPout1SOURCE 1600 µA VCPout1 = VCC/2, PLL1_CP_GAIN = 3 8
PLL1 charge pump sink current ICPout1SINK -100 µA VCPout1 = VCC/2, PLL1_CP_GAIN = 0 8
PLL1 charge pump sink current ICPout1SINK -1600 µA VCPout1 = VCC/2, PLL1_CP_GAIN = 3 8

CAD (KiCad official)

  • Symbol: LMK04803BISQE
  • Footprint: Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
  • 3D model: WQFN-64-EP(9x9) (KiCad packages3D, STEP)
  • 3D model files: lmk04803bisqe-etched.step / lmk04803bisqe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmk04803bisqe.step / lmk04803bisqe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (139 pp, sha256 feec73f49dc3753a, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF