← Commit history

Initial commit: component/lmk03200isqe

Ray ·9a3e0c01cb ·
2 files changed +475
README.mdadded+85
@@ -0,0 +1,85 @@+# LMK03200ISQE++**Texas Instruments** · Clock Generators, PLLs, Frequency Synthesizers · WQFN-48-EP(7x7)++LMK03200ISQE from Texas Instruments, in a WQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground connection. |+| 2 | Fout | output | Internal VCO frequency output; tuning range 1185-1296 MHz with approximately 800 fs RMS jitter. |+| 3 | Vcc1 | power_in | Power supply input; rated 3.15-3.45 V. |+| 4 | CLKuWire | input | MICROWIRE protocol serial clock input; data clocked on rising edge. |+| 5 | DATAuWire | input | MICROWIRE protocol serial data input; MSB first, sampled on CLKuWire rising edge. |+| 6 | LEuWire | input | MICROWIRE protocol latch enable input; rising edge transfers shift register to selected register bank. |+| 7 | NC | unconnected | No connection. |+| 8 | Vcc2 | power_in | Power supply input; rated 3.15-3.45 V. |+| 9 | LDObyp1 | passive | LDO bypass capacitor pin; bypass with 10 µF capacitor for proper LDO operation. |+| 10 | LDObyp2 | passive | LDO bypass capacitor pin; bypass with 0.1 µF capacitor for proper LDO operation. |+| 11 | GOE | input | Global output enable input; logic high enables all clock outputs, low disables all outputs. |+| 12 | LD | output | Lock detect and test output; function selectable via PLL_MUX register (lock detect, frequency calibration status, or analog/divider outputs). |+| 13 | Vcc3 | power_in | Power supply input; rated 3.15-3.45 V. |+| 14 | CLKout0 | output | LVDS differential clock output 0, positive; 250-450 mV differential voltage to 50 Ω load. |+| 15 | CLKout0* | output | LVDS differential clock output 0, negative; complementary to CLKout0. |+| 16 | Vcc4 | power_in | Power supply input; rated 3.15-3.45 V. |+| 17 | CLKout1 | output | LVDS differential clock output 1, positive; 250-450 mV differential voltage to 50 Ω load. |+| 18 | CLKout1* | output | LVDS differential clock output 1, negative; complementary to CLKout1. |+| 19 | Vcc5 | power_in | Power supply input; rated 3.15-3.45 V. |+| 20 | CLKout2 | output | LVDS differential clock output 2, positive; 250-450 mV differential voltage to 50 Ω load. |+| 21 | CLKout2* | output | LVDS differential clock output 2, negative; complementary to CLKout2. |+| 22 | Vcc6 | power_in | Power supply input; rated 3.15-3.45 V. |+| 23 | CLKout3 | output | LVPECL differential clock output 3, positive; 660-965 mV differential voltage to 50 Ω load. |+| 24 | CLKout3* | output | LVPECL differential clock output 3, negative; complementary to CLKout3. |+| 25 | GND | power_in | Ground connection. |+| 26 | Vcc7 | power_in | Power supply input; rated 3.15-3.45 V. |+| 27 | SYNC* | input | Global clock output synchronization input; active low, internal pull-up resistor, minimum low pulse duration ≥ one VCO divider cycle. |+| 28 | OSCin | input | Oscillator reference clock input, positive; AC coupled, 1-200 MHz, 0.2-1.6 V differential input voltage. |+| 29 | OSCin* | input | Oscillator reference clock input, negative; AC coupled, 1-200 MHz, 0.2-1.6 V differential input voltage. |+| 30 | Vcc8 | power_in | Power supply input; rated 3.15-3.45 V. |+| 31 | Vcc9 | power_in | Power supply input; rated 3.15-3.45 V. |+| 32 | CPout | output | Charge pump output for external loop filter connection; bias point stabilizes at approximately Vcc/2. |+| 33 | Vcc10 | power_in | Power supply input; rated 3.15-3.45 V. |+| 34 | FBCLKin | input | External feedback clock input for 0-delay mode, positive; AC coupled, 1-800 MHz, 0.2-1.6 V differential input voltage. |+| 35 | FBCLKin* | input | External feedback clock input for 0-delay mode, negative; AC coupled, 1-800 MHz, 0.2-1.6 V differential input voltage. |+| 36 | Bias | passive | Bias bypass capacitor pin; bypass with 1 µF low-leakage capacitor to Vcc for low-noise operation. |+| 37 | Vcc11 | power_in | Power supply input; rated 3.15-3.45 V. |+| 38 | CLKout4 | output | LVPECL differential clock output 4, positive; 660-965 mV differential voltage to 50 Ω load. |+| 39 | CLKout4* | output | LVPECL differential clock output 4, negative; complementary to CLKout4. |+| 40 | Vcc12 | power_in | Power supply input; rated 3.15-3.45 V. |+| 41 | CLKout5 | output | LVPECL differential clock output 5, positive; can be routed for internal 0-delay feedback path. |+| 42 | CLKout5* | output | LVPECL differential clock output 5, negative; complementary to CLKout5. |+| 43 | Vcc13 | power_in | Power supply input; rated 3.15-3.45 V. |+| 44 | CLKout6 | output | LVPECL differential clock output 6, positive; can be routed for internal 0-delay feedback path. |+| 45 | CLKout6* | output | LVPECL differential clock output 6, negative; complementary to CLKout6. |+| 46 | Vcc14 | power_in | Power supply input; rated 3.15-3.45 V. |+| 47 | CLKout7 | output | LVPECL differential clock output 7, positive; 660-965 mV differential voltage to 50 Ω load. |+| 48 | CLKout7* | output | LVPECL differential clock output 7, negative; complementary to CLKout7. |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-48-EP(7x7) |+| Category | Clock/Timing |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `LMK03200ISQE`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: WQFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `lmk03200isqe-etched.step` / `lmk03200isqe-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmk03200isqe.step` / `lmk03200isqe.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmk03200) (56 pp, sha256 `6f10a8696c555da4`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmk03200isqe-datasheet.pdf)
page.jsonadded+390
@@ -0,0 +1,390 @@+{+  "slug": "lmk03200isqe",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Clock Generators, PLLs, Frequency Synthesizers, WQFN-48-EP(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "clock-timing",+    "lmk03200isqe",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lmk03200isqe.kicad_sym",+    "lmk03200isqe.kicad_mod",+    "lmk03200isqe.glb",+    "lmk03200isqe.step",+    "lmk03200isqe.lbr",+    "docs/hero.png",+    "docs/lmk03200isqe-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LMK03200ISQE",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-48-EP(7x7)",+    "pin_count": 49,+    "category": "Clock/Timing",+    "subcategory": "Clock Generators, PLLs, Frequency Synthesizers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lmk03200",+    "parts": {+      "symbol": "lmk03200isqe.kicad_sym",+      "footprint": "lmk03200isqe.kicad_mod",+      "model_3d": "lmk03200isqe-etched.glb",+      "model_3d_plain": "lmk03200isqe.glb",+      "model_3d_step": "lmk03200isqe-etched.step",+      "model_3d_step_plain": "lmk03200isqe.step",+      "lbr": "lmk03200isqe.lbr"+    },+    "distributor_links": {+      "lcsc": "C2665233"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "2",+        "name": "Fout",+        "type": "output",+        "description": "Internal VCO frequency output; tuning range 1185-1296 MHz with approximately 800 fs RMS jitter."+      },+      {+        "number": "3",+        "name": "Vcc1",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "4",+        "name": "CLKuWire",+        "type": "input",+        "description": "MICROWIRE protocol serial clock input; data clocked on rising edge."+      },+      {+        "number": "5",+        "name": "DATAuWire",+        "type": "input",+        "description": "MICROWIRE protocol serial data input; MSB first, sampled on CLKuWire rising edge."+      },+      {+        "number": "6",+        "name": "LEuWire",+        "type": "input",+        "description": "MICROWIRE protocol latch enable input; rising edge transfers shift register to selected register bank."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "8",+        "name": "Vcc2",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "9",+        "name": "LDObyp1",+        "type": "passive",+        "description": "LDO bypass capacitor pin; bypass with 10 µF capacitor for proper LDO operation."+      },+      {+        "number": "10",+        "name": "LDObyp2",+        "type": "passive",+        "description": "LDO bypass capacitor pin; bypass with 0.1 µF capacitor for proper LDO operation."+      },+      {+        "number": "11",+        "name": "GOE",+        "type": "input",+        "description": "Global output enable input; logic high enables all clock outputs, low disables all outputs."+      },+      {+        "number": "12",+        "name": "LD",+        "type": "output",+        "description": "Lock detect and test output; function selectable via PLL_MUX register (lock detect, frequency calibration status, or analog/divider outputs)."+      },+      {+        "number": "13",+        "name": "Vcc3",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "14",+        "name": "CLKout0",+        "type": "output",+        "description": "LVDS differential clock output 0, positive; 250-450 mV differential voltage to 50 Ω load."+      },+      {+        "number": "15",+        "name": "CLKout0*",+        "type": "output",+        "description": "LVDS differential clock output 0, negative; complementary to CLKout0."+      },+      {+        "number": "16",+        "name": "Vcc4",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "17",+        "name": "CLKout1",+        "type": "output",+        "description": "LVDS differential clock output 1, positive; 250-450 mV differential voltage to 50 Ω load."+      },+      {+        "number": "18",+        "name": "CLKout1*",+        "type": "output",+        "description": "LVDS differential clock output 1, negative; complementary to CLKout1."+      },+      {+        "number": "19",+        "name": "Vcc5",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "20",+        "name": "CLKout2",+        "type": "output",+        "description": "LVDS differential clock output 2, positive; 250-450 mV differential voltage to 50 Ω load."+      },+      {+        "number": "21",+        "name": "CLKout2*",+        "type": "output",+        "description": "LVDS differential clock output 2, negative; complementary to CLKout2."+      },+      {+        "number": "22",+        "name": "Vcc6",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "23",+        "name": "CLKout3",+        "type": "output",+        "description": "LVPECL differential clock output 3, positive; 660-965 mV differential voltage to 50 Ω load."+      },+      {+        "number": "24",+        "name": "CLKout3*",+        "type": "output",+        "description": "LVPECL differential clock output 3, negative; complementary to CLKout3."+      },+      {+        "number": "25",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "26",+        "name": "Vcc7",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "27",+        "name": "SYNC*",+        "type": "input",+        "description": "Global clock output synchronization input; active low, internal pull-up resistor, minimum low pulse duration ≥ one VCO divider cycle."+      },+      {+        "number": "28",+        "name": "OSCin",+        "type": "input",+        "description": "Oscillator reference clock input, positive; AC coupled, 1-200 MHz, 0.2-1.6 V differential input voltage."+      },+      {+        "number": "29",+        "name": "OSCin*",+        "type": "input",+        "description": "Oscillator reference clock input, negative; AC coupled, 1-200 MHz, 0.2-1.6 V differential input voltage."+      },+      {+        "number": "30",+        "name": "Vcc8",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "31",+        "name": "Vcc9",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "32",+        "name": "CPout",+        "type": "output",+        "description": "Charge pump output for external loop filter connection; bias point stabilizes at approximately Vcc/2."+      },+      {+        "number": "33",+        "name": "Vcc10",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "34",+        "name": "FBCLKin",+        "type": "input",+        "description": "External feedback clock input for 0-delay mode, positive; AC coupled, 1-800 MHz, 0.2-1.6 V differential input voltage."+      },+      {+        "number": "35",+        "name": "FBCLKin*",+        "type": "input",+        "description": "External feedback clock input for 0-delay mode, negative; AC coupled, 1-800 MHz, 0.2-1.6 V differential input voltage."+      },+      {+        "number": "36",+        "name": "Bias",+        "type": "passive",+        "description": "Bias bypass capacitor pin; bypass with 1 µF low-leakage capacitor to Vcc for low-noise operation."+      },+      {+        "number": "37",+        "name": "Vcc11",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "38",+        "name": "CLKout4",+        "type": "output",+        "description": "LVPECL differential clock output 4, positive; 660-965 mV differential voltage to 50 Ω load."+      },+      {+        "number": "39",+        "name": "CLKout4*",+        "type": "output",+        "description": "LVPECL differential clock output 4, negative; complementary to CLKout4."+      },+      {+        "number": "40",+        "name": "Vcc12",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "41",+        "name": "CLKout5",+        "type": "output",+        "description": "LVPECL differential clock output 5, positive; can be routed for internal 0-delay feedback path."+      },+      {+        "number": "42",+        "name": "CLKout5*",+        "type": "output",+        "description": "LVPECL differential clock output 5, negative; complementary to CLKout5."+      },+      {+        "number": "43",+        "name": "Vcc13",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "44",+        "name": "CLKout6",+        "type": "output",+        "description": "LVPECL differential clock output 6, positive; can be routed for internal 0-delay feedback path."+      },+      {+        "number": "45",+        "name": "CLKout6*",+        "type": "output",+        "description": "LVPECL differential clock output 6, negative; complementary to CLKout6."+      },+      {+        "number": "46",+        "name": "Vcc14",+        "type": "power_in",+        "description": "Power supply input; rated 3.15-3.45 V."+      },+      {+        "number": "47",+        "name": "CLKout7",+        "type": "output",+        "description": "LVPECL differential clock output 7, positive; 660-965 mV differential voltage to 50 Ω load."+      },+      {+        "number": "48",+        "name": "CLKout7*",+        "type": "output",+        "description": "LVPECL differential clock output 7, negative; complementary to CLKout7."+      },+      {+        "number": "49",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 49 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 56,+        "cost_usd": 0.7606,+        "at": "2026-09-22T01:31:26"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lmk03200",+        "pages": 56,+        "sha256": "6f10a8696c555da4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 49,+        "described": 49,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file