main
History Download
Ray Publish 0.1.0 2cabba4

LMK01020ISQX

Texas Instruments · Clock Buffers, Drivers · QFN-48-EP(7x7)

LMK01020ISQX from Texas Instruments, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin.
2 NC unconnected No connect; the pin is not connected to the die.
3 Vcc1 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
4 CLKuWire input MICROWIRE clock input for device programming.
5 DATAuWire input MICROWIRE data input for device programming.
6 LEuWire input MICROWIRE latch enable input for device programming.
7 NC unconnected No connect; the pin is not connected to the die.
8 Vcc2 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
9 NC unconnected No connect; the pin is not connected to the die.
10 NC unconnected No connect; the pin is not connected to the die.
11 GOE input Global output enable input.
12 Test output Test output used strictly for test purposes that should be left unconnected in normal operation; any load above 1 kΩ is acceptable.
13 Vcc3 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
14 CLKout0 output Clock output 0 (true); LVPECL output on the LMK01020.
15 CLKout0* output Clock output 0 (complement); LVPECL output on the LMK01020.
16 Vcc4 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
17 CLKout1 output Clock output 1 (true); LVPECL output on the LMK01020.
18 CLKout1* output Clock output 1 (complement); LVPECL output on the LMK01020.
19 Vcc5 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
20 CLKout2 output Clock output 2 (true); LVPECL output on the LMK01020.
21 CLKout2* output Clock output 2 (complement); LVPECL output on the LMK01020.
22 Vcc6 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
23 CLKout3 output Clock output 3 (true); LVPECL output on the LMK01020.
24 CLKout3* output Clock output 3 (complement); LVPECL output on the LMK01020.
25 GND power_in Ground pin.
26 Vcc7 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
27 SYNC* input Global clock output synchronization input that synchronizes the outputs.
28 CLKin0 input CLKin 0 input; must be AC coupled.
29 CLKin0* input CLKin 0 complement input; must be AC coupled.
30 Vcc8 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
31 Vcc9 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
32 NC unconnected No connect; the pin is not connected to the die.
33 Vcc10 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
34 CLKin1 input CLKin 1 input; must be AC coupled.
35 CLKin1* input CLKin 1 complement input; must be AC coupled.
36 Bias input Bias bypass pin.
37 Vcc11 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
38 CLKout4 output Clock output 4 (true); LVPECL output on the LMK01020.
39 CLKout4* output Clock output 4 (complement); LVPECL output on the LMK01020.
40 Vcc12 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
41 CLKout5 output Clock output 5 (true); LVPECL output on the LMK01020.
42 CLKout5* output Clock output 5 (complement); LVPECL output on the LMK01020.
43 Vcc13 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
44 CLKout6 output Clock output 6 (true); LVPECL output on the LMK01020.
45 CLKout6* output Clock output 6 (complement); LVPECL output on the LMK01020.
46 Vcc14 power_in Power supply pin; the device operates from 3.15 V to 3.45 V (3.3 V typical).
47 CLKout7 output Clock output 7 (true); LVPECL output on the LMK01020.
48 CLKout7* output Clock output 7 (complement); LVPECL output on the LMK01020.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package QFN-48-EP(7x7)
Category Clock and Timing
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Temperature TA -40 25 85 °C 4
Power Supply Voltage VCC 3.15 3.3 3.45 V 4
Power Supply Voltage VCC -0.3 3.6 V 4
Input Voltage VIN -0.3 V 4
Storage Temperature Range TSTG -65 150 °C 4
Lead Temperature TL 260 °C solder 4 s 4
Junction Temperature TJ 125 °C 4
CLKin Frequency Range fCLKin 1 1600 MHz 6
CLKin Frequency Input Duty Cycle DUTYCLKin 30 70 % fCLKin ≤ 800 MHz 6
CLKin Frequency Input Duty Cycle DUTYCLKin 40 60 % fCLKin > 800 MHz 6
Input Power Range for CLKin or CLKin* PCLKin -13 5 dBm AC coupled 6
Maximum Allowable Delay DelayCLKout 2250 ps fCLKoutX ≤ 1 GHz; delay limited to maximum programmable value 6
Allowable Divide Range DivideCLKoutX 1 510 fCLKinX ≤ 1300 MHz 6
Differential Output Voltage (LVPECL) VOD 660 810 965 mV Vboost = 0 7
tSKEW CLKoutX to CLKoutY (LVPECL) tSKEW -30 3 30 ps Equal loading and identical clock configuration; Termination = 50 Ω to Vcc - 2 V 7
High-Level Input Voltage (LVTTL) VIH 2 V 7
High-Level Input Current (LVTTL) IIH -5 5 µA VIH = Vcc 7
Low-Level Input Current (LVTTL) IIL -40 5 µA VIL = 0 7
High-Level Input Voltage (MICROWIRE) VIH 1.6 V 8
High-Level Input Current (MICROWIRE) IIH -5 5 µA VIH = Vcc 8
Low-Level Input Current (MICROWIRE) IIL -5 5 µA VIL = 0 8
Package Thermal Resistance, junction to ambient θJA 27.4 °C/W 48-lead LLP; JEDEC 4-layer board with 16 thermal vias 5
Package Thermal Resistance, junction to thermal pad θJ-PAD 5.8 °C/W 48-lead LLP; JEDEC 4-layer board with 16 thermal vias 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 48-Lead LLP (1) 27.4° C/W 5.8° C/W (1) Specification assumes 16 thermal vias connect the die attach pad to the embedded copper plane on the 4-layer JEDEC board. These 5

CAD (KiCad official)

  • Symbol: LMK01020ISQX
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: lmk01020isqx-etched.step / lmk01020isqx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmk01020isqx.step / lmk01020isqx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (26 pp, sha256 2f375dc7f4989a3f, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF