main
Ray
Publish 0.1.0
2697a0b
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482
{
"slug": "lmk01010isq",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Clock Buffers, Drivers, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"rtc-clock chip",
"lmk01010isq",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lmk01010isq.kicad_sym",
"lmk01010isq.kicad_mod",
"lmk01010isq.glb",
"lmk01010isq.step",
"lmk01010isq.lbr",
"docs/hero.png",
"docs/lmk01010isq-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lmk01010isq-hero.glb",
"lmk01010isq-hero.overlay.json",
"lmk01010isq-etched.glb"
],
"component": {
"mpn": "LMK01010ISQ",
"manufacturer": "Texas Instruments",
"package": "WQFN-48-EP(7x7)",
"pin_count": 49,
"category": "RTC/Clock Chip",
"subcategory": "Clock Buffers, Drivers",
"datasheet": "https://www.ti.com/lit/ds/symlink/lmk01010.pdf",
"parts": {
"symbol": "lmk01010isq.kicad_sym",
"footprint": "lmk01010isq.kicad_mod",
"model_3d": "lmk01010isq-hero.glb",
"model_3d_plain": "lmk01010isq-etched.glb",
"model_3d_step": "lmk01010isq-etched.step",
"model_3d_step_plain": "lmk01010isq.step",
"lbr": "lmk01010isq.lbr"
},
"distributor_links": {
"lcsc": "C2673050",
"mouser": "926-LMK01010ISQ/NOPB"
},
"distributor_check": {
"checked_at": "2026-11-10T08:49:56Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 967 calls left today"
},
"mouser": {
"pn": "926-LMK01010ISQ/NOPB",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground pin; connect to the system ground plane."
},
{
"number": "2",
"name": "NC",
"type": "unconnected",
"description": "No connect; the pin is not connected to the die."
},
{
"number": "3",
"name": "Vcc1",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "4",
"name": "CLKuWire",
"type": "input",
"description": "MICROWIRE clock input for register programming, which is clocked on the rising edge (MSB first)."
},
{
"number": "5",
"name": "DATAuWire",
"type": "input",
"description": "MICROWIRE data input for register programming; data bits are shifted into the register on each CLKuWire rising edge."
},
{
"number": "6",
"name": "LEuWire",
"type": "input",
"description": "MICROWIRE latch enable input; data is transferred to the addressed register on its rising edge."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No connect; the pin is not connected to the die."
},
{
"number": "8",
"name": "Vcc2",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "No connect; the pin is not connected to the die."
},
{
"number": "10",
"name": "NC",
"type": "unconnected",
"description": "No connect; the pin is not connected to the die."
},
{
"number": "11",
"name": "GOE",
"type": "input",
"description": "Global Output Enable; pulling it low disables all clock outputs, and it has an internal pull-up resistor."
},
{
"number": "12",
"name": "Test",
"type": "output",
"description": "Test output that should be left not connected for normal operation; any load with an impedance above 1 kΩ is acceptable."
},
{
"number": "13",
"name": "Vcc3",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "14",
"name": "CLKout0",
"type": "output",
"description": "True side of clock output 0; for the LMK01010 this output is LVDS and it is enabled through CLKout0_EN and GOE."
},
{
"number": "15",
"name": "CLKout0*",
"type": "output",
"description": "Complementary side of clock output 0; for the LMK01010 this output is LVDS."
},
{
"number": "16",
"name": "Vcc4",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "17",
"name": "CLKout1",
"type": "output",
"description": "True side of clock output 1; for the LMK01010 this output is LVDS."
},
{
"number": "18",
"name": "CLKout1*",
"type": "output",
"description": "Complementary side of clock output 1; for the LMK01010 this output is LVDS."
},
{
"number": "19",
"name": "Vcc5",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "20",
"name": "CLKout2",
"type": "output",
"description": "True side of clock output 2; for the LMK01010 this output is LVDS."
},
{
"number": "21",
"name": "CLKout2*",
"type": "output",
"description": "Complementary side of clock output 2; for the LMK01010 this output is LVDS."
},
{
"number": "22",
"name": "Vcc6",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "23",
"name": "CLKout3",
"type": "output",
"description": "True side of clock output 3; for the LMK01010 this output is LVDS."
},
{
"number": "24",
"name": "CLKout3*",
"type": "output",
"description": "Complementary side of clock output 3; for the LMK01010 this output is LVDS."
},
{
"number": "25",
"name": "GND",
"type": "power_in",
"description": "Ground pin; connect to the system ground plane."
},
{
"number": "26",
"name": "Vcc7",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "27",
"name": "SYNC*",
"type": "input",
"description": "Global clock output synchronization; holding it low holds the divided outputs low, and it has an internal pull-up resistor."
},
{
"number": "28",
"name": "CLKin0",
"type": "input",
"description": "CLKin0 input (clock input 0); it must be AC coupled."
},
{
"number": "29",
"name": "CLKin0*",
"type": "input",
"description": "Complementary CLKin0 input; it must be AC coupled."
},
{
"number": "30",
"name": "Vcc8",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "31",
"name": "Vcc9",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "32",
"name": "NC",
"type": "unconnected",
"description": "No connect; the pin is not connected to the die."
},
{
"number": "33",
"name": "Vcc10",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "34",
"name": "CLKin1",
"type": "input",
"description": "CLKin1 input (clock input 1); it must be AC coupled."
},
{
"number": "35",
"name": "CLKin1*",
"type": "input",
"description": "Complementary CLKin1 input; it must be AC coupled."
},
{
"number": "36",
"name": "Bias",
"type": "input",
"description": "Bias bypass pin; it should be bypassed to Vcc with a low leakage 1 µF capacitor for low noise performance."
},
{
"number": "37",
"name": "Vcc11",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "38",
"name": "CLKout4",
"type": "output",
"description": "True side of clock output 4; for the LMK01010 this output is LVDS."
},
{
"number": "39",
"name": "CLKout4*",
"type": "output",
"description": "Complementary side of clock output 4; for the LMK01010 this output is LVDS."
},
{
"number": "40",
"name": "Vcc12",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "41",
"name": "CLKout5",
"type": "output",
"description": "True side of clock output 5; for the LMK01010 this output is LVDS."
},
{
"number": "42",
"name": "CLKout5*",
"type": "output",
"description": "Complementary side of clock output 5; for the LMK01010 this output is LVDS."
},
{
"number": "43",
"name": "Vcc13",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "44",
"name": "CLKout6",
"type": "output",
"description": "True side of clock output 6; for the LMK01010 this output is LVDS."
},
{
"number": "45",
"name": "CLKout6*",
"type": "output",
"description": "Complementary side of clock output 6; for the LMK01010 this output is LVDS."
},
{
"number": "46",
"name": "Vcc14",
"type": "power_in",
"description": "Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously."
},
{
"number": "47",
"name": "CLKout7",
"type": "output",
"description": "True side of clock output 7; for the LMK01010 this output is LVDS."
},
{
"number": "48",
"name": "CLKout7*",
"type": "output",
"description": "Complementary side of clock output 7; for the LMK01010 this output is LVDS."
},
{
"number": "49",
"name": "DAP",
"type": "power_in",
"description": "Die attach (exposed thermal) pad; it should be connected to ground and soldered to the PCB for heat removal."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet pin table lists the Vcc pin numbers and the Vcc1..Vcc14 names as separate lists withou; The exposed die attach pad has no printed number in the pin table (it is listed as DAP). I used 49, ; Pin 12 (Test) is listed as output (O) and pin 36 (Bias) as input (I) in the datasheet, and I kept th",
"1/49 pins cited to the wrong page (name found elsewhere): ['49:DAP@p4']"
],
"pages_sent": 28,
"cost_usd": 0.1609,
"at": "2026-11-10T08:49:44"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/lmk01010.pdf",
"pages": 28,
"sha256": "8f668476c4ca1696",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 49,
"described": 49,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lmk01010isq.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.0,
7.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lmk01010isq-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.0,
7.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9eb2e90c9f59ffeb350cedce0bb3d8c76a70601e1634525c8e61ba408c0b2eb6",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "RHS0048A",
"source_page": 25,
"D": {
"nom_mm": 7.0,
"range_mm": [
6.85,
7.15
]
},
"E1": {
"nom_mm": 7.0,
"range_mm": [
6.85,
7.15
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
0.7,
0.8
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lmk01010isq.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}