main
History Download
Ray Publish 0.1.0 2697a0b

LMK01010ISQ

Texas Instruments · Clock Buffers, Drivers · WQFN-48-EP(7x7)

LMK01010ISQ from Texas Instruments, in a WQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin; connect to the system ground plane.
2 NC unconnected No connect; the pin is not connected to the die.
3 Vcc1 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
4 CLKuWire input MICROWIRE clock input for register programming, which is clocked on the rising edge (MSB first).
5 DATAuWire input MICROWIRE data input for register programming; data bits are shifted into the register on each CLKuWire rising edge.
6 LEuWire input MICROWIRE latch enable input; data is transferred to the addressed register on its rising edge.
7 NC unconnected No connect; the pin is not connected to the die.
8 Vcc2 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
9 NC unconnected No connect; the pin is not connected to the die.
10 NC unconnected No connect; the pin is not connected to the die.
11 GOE input Global Output Enable; pulling it low disables all clock outputs, and it has an internal pull-up resistor.
12 Test output Test output that should be left not connected for normal operation; any load with an impedance above 1 kΩ is acceptable.
13 Vcc3 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
14 CLKout0 output True side of clock output 0; for the LMK01010 this output is LVDS and it is enabled through CLKout0_EN and GOE.
15 CLKout0* output Complementary side of clock output 0; for the LMK01010 this output is LVDS.
16 Vcc4 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
17 CLKout1 output True side of clock output 1; for the LMK01010 this output is LVDS.
18 CLKout1* output Complementary side of clock output 1; for the LMK01010 this output is LVDS.
19 Vcc5 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
20 CLKout2 output True side of clock output 2; for the LMK01010 this output is LVDS.
21 CLKout2* output Complementary side of clock output 2; for the LMK01010 this output is LVDS.
22 Vcc6 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
23 CLKout3 output True side of clock output 3; for the LMK01010 this output is LVDS.
24 CLKout3* output Complementary side of clock output 3; for the LMK01010 this output is LVDS.
25 GND power_in Ground pin; connect to the system ground plane.
26 Vcc7 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
27 SYNC* input Global clock output synchronization; holding it low holds the divided outputs low, and it has an internal pull-up resistor.
28 CLKin0 input CLKin0 input (clock input 0); it must be AC coupled.
29 CLKin0* input Complementary CLKin0 input; it must be AC coupled.
30 Vcc8 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
31 Vcc9 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
32 NC unconnected No connect; the pin is not connected to the die.
33 Vcc10 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
34 CLKin1 input CLKin1 input (clock input 1); it must be AC coupled.
35 CLKin1* input Complementary CLKin1 input; it must be AC coupled.
36 Bias input Bias bypass pin; it should be bypassed to Vcc with a low leakage 1 µF capacitor for low noise performance.
37 Vcc11 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
38 CLKout4 output True side of clock output 4; for the LMK01010 this output is LVDS.
39 CLKout4* output Complementary side of clock output 4; for the LMK01010 this output is LVDS.
40 Vcc12 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
41 CLKout5 output True side of clock output 5; for the LMK01010 this output is LVDS.
42 CLKout5* output Complementary side of clock output 5; for the LMK01010 this output is LVDS.
43 Vcc13 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
44 CLKout6 output True side of clock output 6; for the LMK01010 this output is LVDS.
45 CLKout6* output Complementary side of clock output 6; for the LMK01010 this output is LVDS.
46 Vcc14 power_in Power supply pin; the supply range is 3.15 V to 3.45 V (3.3 V typical), and all Vcc pins should be applied simultaneously.
47 CLKout7 output True side of clock output 7; for the LMK01010 this output is LVDS.
48 CLKout7* output Complementary side of clock output 7; for the LMK01010 this output is LVDS.
49 DAP power_in Die attach (exposed thermal) pad; it should be connected to ground and soldered to the PCB for heat removal.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-48-EP(7x7)
Category RTC/Clock Chip
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VCC -0.3 3.6 V 4
Input Voltage VIN -0.3 V Maximum printed as (VCC + 0.3) V 4
Storage Temperature Range TSTG -65 150 °C 4
Lead Temperature TL 260 °C Solder 4 s 4
Junction Temperature TJ 125 °C 4
Ambient Temperature TA -40 25 85 °C 4
Power Supply Voltage VCC 3.15 3.3 3.45 V 4
Thermal resistance, junction to ambient (48-Lead LLP) θJA 27.4 °C/W Specification assumes 16 thermal vias on 4-layer JEDEC board 5
Thermal resistance, junction to thermal pad (48-Lead LLP) θJ-PAD 5.8 °C/W Specification assumes 16 thermal vias on 4-layer JEDEC board 5
CLKin Frequency Range fCLKin 1 1600 MHz 6
CLKin Frequency Input Duty Cycle DUTYCLKin 30 70 % fCLKin ≤ 800 MHz 6
CLKin Frequency Input Duty Cycle DUTYCLKin 40 60 % fCLKin > 800 MHz 6
Input Power Range for CLKin or CLKin* PCLKin -13 5 dBm AC coupled 6
Maximum Allowable Delay DelayCLKout 2250 ps fCLKoutX ≤ 1 GHz; delay limited to maximum programmable value 6
Allowable divide range DivideCLKoutX 1 510 fCLKinX ≤ 1300 MHz 6
CLKoutX to CLKoutY skew (LVDS) tSKEW -30 4 30 ps Equal loading and identical clock configuration 7
Differential Output Voltage (LVDS) VOD 250 350 450 mV RL = 100 Ω, Vboost=0 7
Change in magnitude of VOD for complementary output states ΔVOD -50 50 mV RL = 100 Ω 7
Output Offset Voltage VOS 1.07 1.25 1.37 V RL = 100 Ω 7
Change in magnitude of VOS for complementary output states ΔVOS -35 35 mV RL = 100 Ω 7
Clock Output Short Circuit Current (single ended) ISA, ISB -24 24 mA Single ended outputs shorted to GND 7
Clock Output Short Circuit Current (differential) ISAB -12 12 mA Complementary outputs tied together 7
CLKoutX to CLKoutY skew (LVPECL) tSKEW -30 3 30 ps Equal loading and identical clock configuration; Termination = 50 Ω to Vcc - 2 V 7
Differential Output Voltage (LVPECL) VOD 660 810 965 mV Vboost = 0 7
High-Level Input Voltage (LVTTL) VIH 2 V Applies to GOE, LD, and SYNC* 7
High-Level Input Current (LVTTL) IIH -5 5 µA VIH = Vcc 7
Low-Level Input Current (LVTTL) IIL -40 5 µA VIL = 0 7
High-Level Input Voltage (MICROWIRE) VIH 1.6 V Applies to CLKuWire, DATAuWire, and LEuWire 8
High-Level Input Current (MICROWIRE) IIH -5 5 µA VIH = Vcc 8
Low-Level Input Current (MICROWIRE) IIL -5 5 µA VIL = 0 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 48-Lead LLP (1) 27.4° C/W 5.8° C/W (1) Specification assumes 16 thermal vias connect the die attach pad to the embedded copper plane on the 4-layer JEDEC board. These 5

CAD (KiCad official)

  • Symbol: LMK01010ISQ
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: WQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: lmk01010isq-etched.step / lmk01010isq-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmk01010isq.step / lmk01010isq.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 8f668476c4ca1696, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF