main
Ray
Publish 0.1.0
42c8d4a
LMK00306SQE
Texas Instruments · Clock Buffers, Drivers, Distributors · WQFN-36-EP(6x6)
LMK00306SQE from Texas Instruments, in a WQFN-36-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | VCCOA | power_in | Power supply for Bank A output buffers; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 3 | CLKoutA0 | output | Differential clock output A0; output type set by CLKoutA_TYPE pins. |
| 4 | CLKoutA0* | output | Differential clock output A0 complement; output type set by CLKoutA_TYPE pins. |
| 5 | VCCOA | power_in | Power supply for Bank A output buffers; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 6 | CLKoutA1 | output | Differential clock output A1; output type set by CLKoutA_TYPE pins. |
| 7 | CLKoutA1* | output | Differential clock output A1 complement; output type set by CLKoutA_TYPE pins. |
| 8 | CLKoutA2 | output | Differential clock output A2; output type set by CLKoutA_TYPE pins. |
| 9 | CLKoutA2* | output | Differential clock output A2 complement; output type set by CLKoutA_TYPE pins. |
| 10 | CLKoutA_TYPE0 | input | Bank A output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 11 | Vcc | power_in | Power supply for core and input buffer blocks; operates from 3.3 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcc pin. |
| 12 | OSCin | input | Input for crystal; can also be driven by an XO, TCXO, or other external single-ended clock. |
| 13 | OSCout | output | Output for crystal; leave floating if OSCin is driven by a single-ended clock. |
| 14 | CLKin_SEL0 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 15 | CLKin0 | input | Universal clock input 0; accepts differential or single-ended clocks. |
| 16 | CLKin0* | input | Universal clock input 0 complement; accepts differential or single-ended clocks. |
| 17 | CLKin_SEL1 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 18 | CLKoutB_TYPE0 | input | Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 19 | GND | power_in | Ground. |
| 20 | CLKoutB2* | output | Differential clock output B2 complement; output type set by CLKoutB_TYPE pins. |
| 21 | CLKoutB2 | output | Differential clock output B2; output type set by CLKoutB_TYPE pins. |
| 22 | CLKoutB1* | output | Differential clock output B1 complement; output type set by CLKoutB_TYPE pins. |
| 23 | CLKoutB1 | output | Differential clock output B1; output type set by CLKoutB_TYPE pins. |
| 24 | VCCOB | power_in | Power supply for Bank B output buffers; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 25 | CLKoutB0* | output | Differential clock output B0 complement; output type set by CLKoutB_TYPE pins. |
| 26 | CLKoutB0 | output | Differential clock output B0; output type set by CLKoutB_TYPE pins. |
| 27 | VCCOB | power_in | Power supply for Bank B output buffers; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 28 | GND | power_in | Ground. |
| 29 | CLKoutB_TYPE1 | input | Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 30 | CLKin1* | input | Universal clock input 1 complement; accepts differential or single-ended clocks. |
| 31 | CLKin1 | input | Universal clock input 1; accepts differential or single-ended clocks. |
| 32 | Vcc | power_in | Power supply for core and input buffer blocks; operates from 3.3 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcc pin. |
| 33 | REFout | output | LVCMOS reference output; enabled by pulling REFout_EN pin high. |
| 34 | VCCOC | power_in | Power supply for REFout output buffer; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 35 | REFout_EN | input | REFout enable input, internally synchronized to the selected clock input; CMOS control input with internal pull-down resistor. |
| 36 | CLKoutA_TYPE1 | input | Bank A output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 37 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-36-EP(6x6) |
| Category | Clock/Timing |
| Pins | 37 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Temperature Range | TA | -40 | 25 | 85 | °C | 6 | |
| Junction Temperature | TJ | 125 | °C | 6 | |||
| Core Supply Voltage Range | VCC | 3.15 | 3.3 | 3.45 | V | 6 | |
| Absolute maximum supply voltages | VCC, VCCO | -0.3 | 3.6 | V | 6 | ||
| Input Voltage | VIN | -0.3 | V | maximum VCC + 0.3 V as printed | 6 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 6 | ||
| Lead Temperature | TL | 260 | °C | solder 4 s | 6 | ||
| Junction Temperature | TJ | 150 | °C | 6 | |||
| Core Supply Current, All Outputs Disabled | ICC_CORE | 8.5 | 10.5 | mA | CLKinX selected | 7 | |
| Core Supply Current, All Outputs Disabled | ICC_CORE | 10 | 13.5 | mA | OSCin selected | 7 | |
| Additive Core Supply Current, Per LVPECL Bank Enabled | ICC_PECL | 20 | 26.5 | mA | 7 | ||
| Additive Core Supply Current, Per LVDS Bank Enabled | ICC_LVDS | 24 | 29.5 | mA | 7 | ||
| Additive Core Supply Current, Per HCSL Bank Enabled | ICC_HCSL | 29 | 35 | mA | 7 | ||
| Additive Core Supply Current, LVCMOS Output Enabled | ICC_CMOS | 3.5 | 5.5 | mA | 7 | ||
| Additive Output Supply Current, Per LVPECL Bank Enabled | ICCO_PECL | 100 | 123 | mA | Includes output bank bias and load currents, RT = 50 Ω to Vcco - 2V on all outputs in bank | 7 | |
| Additive Output Supply Current, Per LVDS Bank Enabled | ICCO_LVDS | 20 | 27.5 | mA | 7 | ||
| Additive Output Supply Current, Per HCSL Bank Enabled | ICCO_HCSL | 50 | 65 | mA | Includes output bank bias and load currents, RT = 50 Ω on all outputs in bank | 7 | |
| Additive Output Supply Current, LVCMOS Output Enabled | ICCO_CMOS | 9 | 10 | mA | 200 MHz, CL = 5 pF, Vcco = 3.3 V ± 5% | 7 | |
| Additive Output Supply Current, LVCMOS Output Enabled | ICCO_CMOS | 7 | 8 | mA | 200 MHz, CL = 5 pF, Vcco = 2.5 V ± 5% | 7 | |
| High-Level Input Voltage | VIH | 1.6 | V | CMOS control inputs; max printed as Vcc | 7 | ||
| Low-Level Input Voltage | VIL | 0.4 | V | CMOS control inputs; min printed as GND | 7 | ||
| High-Level Input Current | IIH | 50 | µA | VIH = Vcc, internal pull-down resistor | 7 | ||
| Low-Level Input Current | IIL | -5 | 0.1 | µA | VIL = 0 V, internal pull-down resistor | 7 | |
| Input Frequency Range | fCLKin | 3.1 | GHz | Functional up to 3.1 GHz | 8 | ||
| Differential Input Voltage Swing | VID | 0.15 | 1.3 | V | 8 | ||
| Differential Input Common Mode Voltage | VCMD | 0.25 | V | VID = 150 mV; max printed as Vcc - 1.2 | 8 | ||
| Single-Ended Input Voltage Swing | VI_SE | 0.3 | 2 | Vpp | 8 | ||
| Single-Ended Input Common Mode Voltage | VCM | 0.25 | V | max printed as Vcc - 1.2 | 8 | ||
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | -84 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 100 MHz | 8 | ||
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | -82 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 200 MHz | 8 | ||
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | -71 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 500 MHz | 8 | ||
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | -65 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 1000 MHz | 8 | ||
| External Clock Frequency Range | FCLK | 250 | MHz | OSCin driven single-ended, OSCout floating | 8 | ||
| Crystal Frequency Range | FXTAL | 10 | 40 | MHz | Fundamental mode crystal | 8 | |
| Maximum Output Frequency Full VOD Swing, 3.3 V | fCLKout_FS | 1 | 1.2 | GHz | VOD ≥ 600 mV, RL = 100 Ω differential, Vcco = 3.3 V ± 5%, RT = 160 Ω to GND | 9 | |
| Maximum Output Frequency Full VOD Swing, 2.5 V | fCLKout_FS | 0.75 | 1 | GHz | VOD ≥ 600 mV, RL = 100 Ω differential, Vcco = 2.5 V ± 5%, RT = 91 Ω to GND | 9 | |
| Maximum Output Frequency Reduced VOD Swing, 3.3 V | fCLKout_RS | 1.5 | 3.1 | GHz | VOD ≥ 400 mV, RL = 100 Ω differential, Vcco = 3.3 V ± 5%, RT = 160 Ω to GND | 9 | |
| Maximum Output Frequency Reduced VOD Swing, 2.5 V | fCLKout_RS | 1.5 | 2.3 | GHz | VOD ≥ 400 mV, RL = 100 Ω differential, Vcco = 2.5 V ± 5%, RT = 91 Ω to GND | 9 | |
| Duty Cycle | DUTY | 45 | 55 | % | 50% input clock duty cycle | 9 | |
| Output Voltage Swing LVPECL | VOD | 600 | 830 | 1000 | mV | 9 | |
| Output Rise Time | tR | 175 | 300 | ps | 20% to 80%, RT = 160 Ω to GND, RL = 100 Ω differential, CL ≤ 5 pF | 10 | |
| Output Fall Time | tF | 175 | 300 | ps | 80% to 20% | 10 | |
| Output Voltage Swing LVDS | VOD | 250 | 400 | 450 | mV | TA = 25 °C, DC measurement, RL = 100 Ω differential | 10 |
| Change in Magnitude of VOD for Complementary Output States | ΔVOD | -50 | 50 | mV | 10 | ||
| Output Offset Voltage | VOS | 1.125 | 1.25 | 1.375 | V | 10 | |
| Change in Magnitude of VOS for Complementary Output States | ΔVOS | -35 | 35 | mV | 10 | ||
| Output Short Circuit Current Single Ended | ISA, ISB | -24 | 24 | mA | TA = 25 °C, single ended outputs shorted to GND | 10 | |
| Output Short Circuit Current Differential | ISAB | -12 | 12 | mA | TA = 25 °C, complementary outputs tied together | 10 | |
| Output Frequency Range | fCLKout | 400 | MHz | RL = 50 Ω to GND, CL ≤ 5 pF | 11 | ||
| Output High Voltage | VOH | 520 | 810 | 920 | mV | TA = 25 °C, DC measurement, RT = 50 Ω to GND | 11 |
| Absolute Crossing Voltage | VCROSS | 160 | 350 | 460 | mV | RL = 50 Ω to GND, CL ≤ 5 pF | 11 |
| Thermal resistance junction-to-ambient | RθJA | 31.8 | °C/W | 6 | |||
| Thermal resistance junction-to-case (top) | RθJC(top) | 7.2 | °C/W | DAP | 6 | ||
| OSCin Input Capacitance | CIN | 4 | pF | 8 | |||
| Recommended VCCO 3.3 V option | VCCO | 3.3 | V | 3.3 V minus 5% to 3.3 V plus 5% as printed | 6 | ||
| Recommended VCCO 2.5 V option | VCCO | 2.5 | V | 2.5 V minus 5% to 2.5 V plus 5% as printed | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | (1) Any unused output pins should be left floating with minimum copper length (see note in Clock Outputs), or properly terminated if | 5 |
CAD (KiCad official)
- Symbol:
LMK00306SQE - Footprint:
Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm - 3D model: WQFN-36-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
lmk00306sqe-etched.step/lmk00306sqe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk00306sqe.step/lmk00306sqe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
f0388030ac3eb1d9, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMK00306SQE
**Texas Instruments** · Clock Buffers, Drivers, Distributors · WQFN-36-EP(6x6)
LMK00306SQE from Texas Instruments, in a WQFN-36-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | VCCOA | power_in | Power supply for Bank A output buffers; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 3 | CLKoutA0 | output | Differential clock output A0; output type set by CLKoutA_TYPE pins. |
| 4 | CLKoutA0* | output | Differential clock output A0 complement; output type set by CLKoutA_TYPE pins. |
| 5 | VCCOA | power_in | Power supply for Bank A output buffers; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 6 | CLKoutA1 | output | Differential clock output A1; output type set by CLKoutA_TYPE pins. |
| 7 | CLKoutA1* | output | Differential clock output A1 complement; output type set by CLKoutA_TYPE pins. |
| 8 | CLKoutA2 | output | Differential clock output A2; output type set by CLKoutA_TYPE pins. |
| 9 | CLKoutA2* | output | Differential clock output A2 complement; output type set by CLKoutA_TYPE pins. |
| 10 | CLKoutA_TYPE0 | input | Bank A output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 11 | Vcc | power_in | Power supply for core and input buffer blocks; operates from 3.3 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcc pin. |
| 12 | OSCin | input | Input for crystal; can also be driven by an XO, TCXO, or other external single-ended clock. |
| 13 | OSCout | output | Output for crystal; leave floating if OSCin is driven by a single-ended clock. |
| 14 | CLKin_SEL0 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 15 | CLKin0 | input | Universal clock input 0; accepts differential or single-ended clocks. |
| 16 | CLKin0* | input | Universal clock input 0 complement; accepts differential or single-ended clocks. |
| 17 | CLKin_SEL1 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 18 | CLKoutB_TYPE0 | input | Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 19 | GND | power_in | Ground. |
| 20 | CLKoutB2* | output | Differential clock output B2 complement; output type set by CLKoutB_TYPE pins. |
| 21 | CLKoutB2 | output | Differential clock output B2; output type set by CLKoutB_TYPE pins. |
| 22 | CLKoutB1* | output | Differential clock output B1 complement; output type set by CLKoutB_TYPE pins. |
| 23 | CLKoutB1 | output | Differential clock output B1; output type set by CLKoutB_TYPE pins. |
| 24 | VCCOB | power_in | Power supply for Bank B output buffers; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 25 | CLKoutB0* | output | Differential clock output B0 complement; output type set by CLKoutB_TYPE pins. |
| 26 | CLKoutB0 | output | Differential clock output B0; output type set by CLKoutB_TYPE pins. |
| 27 | VCCOB | power_in | Power supply for Bank B output buffers; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 28 | GND | power_in | Ground. |
| 29 | CLKoutB_TYPE1 | input | Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 30 | CLKin1* | input | Universal clock input 1 complement; accepts differential or single-ended clocks. |
| 31 | CLKin1 | input | Universal clock input 1; accepts differential or single-ended clocks. |
| 32 | Vcc | power_in | Power supply for core and input buffer blocks; operates from 3.3 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcc pin. |
| 33 | REFout | output | LVCMOS reference output; enabled by pulling REFout_EN pin high. |
| 34 | VCCOC | power_in | Power supply for REFout output buffer; can operate from 3.3 V or 2.5 V and should be bypassed with a 0.1 uF low-ESR capacitor placed very close to each Vcco pin. |
| 35 | REFout_EN | input | REFout enable input, internally synchronized to the selected clock input; CMOS control input with internal pull-down resistor. |
| 36 | CLKoutA_TYPE1 | input | Bank A output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 37 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-36-EP(6x6) |
| Category | Clock/Timing |
| Pins | 37 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Temperature Range | TA | -40 | 25 | 85 | °C | | 6 |
| Junction Temperature | TJ | | | 125 | °C | | 6 |
| Core Supply Voltage Range | VCC | 3.15 | 3.3 | 3.45 | V | | 6 |
| Absolute maximum supply voltages | VCC, VCCO | -0.3 | | 3.6 | V | | 6 |
| Input Voltage | VIN | -0.3 | | | V | maximum VCC + 0.3 V as printed | 6 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 6 |
| Lead Temperature | TL | | | 260 | °C | solder 4 s | 6 |
| Junction Temperature | TJ | | | 150 | °C | | 6 |
| Core Supply Current, All Outputs Disabled | ICC_CORE | | 8.5 | 10.5 | mA | CLKinX selected | 7 |
| Core Supply Current, All Outputs Disabled | ICC_CORE | | 10 | 13.5 | mA | OSCin selected | 7 |
| Additive Core Supply Current, Per LVPECL Bank Enabled | ICC_PECL | | 20 | 26.5 | mA | | 7 |
| Additive Core Supply Current, Per LVDS Bank Enabled | ICC_LVDS | | 24 | 29.5 | mA | | 7 |
| Additive Core Supply Current, Per HCSL Bank Enabled | ICC_HCSL | | 29 | 35 | mA | | 7 |
| Additive Core Supply Current, LVCMOS Output Enabled | ICC_CMOS | | 3.5 | 5.5 | mA | | 7 |
| Additive Output Supply Current, Per LVPECL Bank Enabled | ICCO_PECL | | 100 | 123 | mA | Includes output bank bias and load currents, RT = 50 Ω to Vcco - 2V on all outputs in bank | 7 |
| Additive Output Supply Current, Per LVDS Bank Enabled | ICCO_LVDS | | 20 | 27.5 | mA | | 7 |
| Additive Output Supply Current, Per HCSL Bank Enabled | ICCO_HCSL | | 50 | 65 | mA | Includes output bank bias and load currents, RT = 50 Ω on all outputs in bank | 7 |
| Additive Output Supply Current, LVCMOS Output Enabled | ICCO_CMOS | | 9 | 10 | mA | 200 MHz, CL = 5 pF, Vcco = 3.3 V ± 5% | 7 |
| Additive Output Supply Current, LVCMOS Output Enabled | ICCO_CMOS | | 7 | 8 | mA | 200 MHz, CL = 5 pF, Vcco = 2.5 V ± 5% | 7 |
| High-Level Input Voltage | VIH | 1.6 | | | V | CMOS control inputs; max printed as Vcc | 7 |
| Low-Level Input Voltage | VIL | | | 0.4 | V | CMOS control inputs; min printed as GND | 7 |
| High-Level Input Current | IIH | | | 50 | µA | VIH = Vcc, internal pull-down resistor | 7 |
| Low-Level Input Current | IIL | -5 | 0.1 | | µA | VIL = 0 V, internal pull-down resistor | 7 |
| Input Frequency Range | fCLKin | | | 3.1 | GHz | Functional up to 3.1 GHz | 8 |
| Differential Input Voltage Swing | VID | 0.15 | | 1.3 | V | | 8 |
| Differential Input Common Mode Voltage | VCMD | 0.25 | | | V | VID = 150 mV; max printed as Vcc - 1.2 | 8 |
| Single-Ended Input Voltage Swing | VI_SE | 0.3 | | 2 | Vpp | | 8 |
| Single-Ended Input Common Mode Voltage | VCM | 0.25 | | | V | max printed as Vcc - 1.2 | 8 |
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | | | -84 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 100 MHz | 8 |
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | | | -82 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 200 MHz | 8 |
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | | | -71 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 500 MHz | 8 |
| Mux Isolation, CLKin0 to CLKin1 | ISOMUX | | | -65 | dBc | fOFFSET > 50 kHz, PCLKinX = 0 dBm, fCLKin0 = 1000 MHz | 8 |
| External Clock Frequency Range | FCLK | | | 250 | MHz | OSCin driven single-ended, OSCout floating | 8 |
| Crystal Frequency Range | FXTAL | 10 | | 40 | MHz | Fundamental mode crystal | 8 |
| Maximum Output Frequency Full VOD Swing, 3.3 V | fCLKout_FS | | 1 | 1.2 | GHz | VOD ≥ 600 mV, RL = 100 Ω differential, Vcco = 3.3 V ± 5%, RT = 160 Ω to GND | 9 |
| Maximum Output Frequency Full VOD Swing, 2.5 V | fCLKout_FS | | 0.75 | 1 | GHz | VOD ≥ 600 mV, RL = 100 Ω differential, Vcco = 2.5 V ± 5%, RT = 91 Ω to GND | 9 |
| Maximum Output Frequency Reduced VOD Swing, 3.3 V | fCLKout_RS | | 1.5 | 3.1 | GHz | VOD ≥ 400 mV, RL = 100 Ω differential, Vcco = 3.3 V ± 5%, RT = 160 Ω to GND | 9 |
| Maximum Output Frequency Reduced VOD Swing, 2.5 V | fCLKout_RS | | 1.5 | 2.3 | GHz | VOD ≥ 400 mV, RL = 100 Ω differential, Vcco = 2.5 V ± 5%, RT = 91 Ω to GND | 9 |
| Duty Cycle | DUTY | 45 | | 55 | % | 50% input clock duty cycle | 9 |
| Output Voltage Swing LVPECL | VOD | 600 | 830 | 1000 | mV | | 9 |
| Output Rise Time | tR | | 175 | 300 | ps | 20% to 80%, RT = 160 Ω to GND, RL = 100 Ω differential, CL ≤ 5 pF | 10 |
| Output Fall Time | tF | | 175 | 300 | ps | 80% to 20% | 10 |
| Output Voltage Swing LVDS | VOD | 250 | 400 | 450 | mV | TA = 25 °C, DC measurement, RL = 100 Ω differential | 10 |
| Change in Magnitude of VOD for Complementary Output States | ΔVOD | -50 | | 50 | mV | | 10 |
| Output Offset Voltage | VOS | 1.125 | 1.25 | 1.375 | V | | 10 |
| Change in Magnitude of VOS for Complementary Output States | ΔVOS | -35 | | 35 | mV | | 10 |
| Output Short Circuit Current Single Ended | ISA, ISB | -24 | | 24 | mA | TA = 25 °C, single ended outputs shorted to GND | 10 |
| Output Short Circuit Current Differential | ISAB | -12 | | 12 | mA | TA = 25 °C, complementary outputs tied together | 10 |
| Output Frequency Range | fCLKout | | | 400 | MHz | RL = 50 Ω to GND, CL ≤ 5 pF | 11 |
| Output High Voltage | VOH | 520 | 810 | 920 | mV | TA = 25 °C, DC measurement, RT = 50 Ω to GND | 11 |
| Absolute Crossing Voltage | VCROSS | 160 | 350 | 460 | mV | RL = 50 Ω to GND, CL ≤ 5 pF | 11 |
| Thermal resistance junction-to-ambient | RθJA | | 31.8 | | °C/W | | 6 |
| Thermal resistance junction-to-case (top) | RθJC(top) | | 7.2 | | °C/W | DAP | 6 |
| OSCin Input Capacitance | CIN | | 4 | | pF | | 8 |
| Recommended VCCO 3.3 V option | VCCO | | 3.3 | | V | 3.3 V minus 5% to 3.3 V plus 5% as printed | 6 |
| Recommended VCCO 2.5 V option | VCCO | | 2.5 | | V | 2.5 V minus 5% to 2.5 V plus 5% as printed | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | (1) Any unused output pins should be left floating with minimum copper length (see note in Clock Outputs), or properly terminated if | 5 |
## CAD (KiCad official)
- Symbol: `LMK00306SQE`
- Footprint: `Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm`
- 3D model: WQFN-36-EP(6x6) (KiCad packages3D, STEP)
- 3D model files: `lmk00306sqe-etched.step` / `lmk00306sqe-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmk00306sqe.step` / `lmk00306sqe.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmk00306.pdf) (39 pp, sha256 `f0388030ac3eb1d9`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmk00306sqe-datasheet.pdf)