main
Ray
Publish 0.1.0
4e5b1b7
LMK00306SQ
Texas Instruments · Clock Buffers, Drivers · WQFN-36-EP(6x6)
LMK00306SQ from Texas Instruments, in a WQFN-36-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | VCCOA | power_in | Bank A output buffer supply that can operate from 3.3 V or 2.5 V; the VCCOA pins are internally tied together and each should be bypassed with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 3 | CLKoutA0 | output | Differential clock output A0 whose output type is set by the CLKoutA_TYPE pins. |
| 4 | CLKoutA0* | output | Complementary side of differential clock output A0, whose output type is set by the CLKoutA_TYPE pins. |
| 5 | VCCOA | power_in | Bank A output buffer supply that can operate from 3.3 V or 2.5 V; the VCCOA pins are internally tied together and each should be bypassed with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 6 | CLKoutA1 | output | Differential clock output A1 whose output type is set by the CLKoutA_TYPE pins. |
| 7 | CLKoutA1* | output | Complementary side of differential clock output A1, whose output type is set by the CLKoutA_TYPE pins. |
| 8 | CLKoutA2 | output | Differential clock output A2 whose output type is set by the CLKoutA_TYPE pins. |
| 9 | CLKoutA2* | output | Complementary side of differential clock output A2, whose output type is set by the CLKoutA_TYPE pins. |
| 10 | CLKoutA_TYPE0 | input | Bank A output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 11 | VCC | power_in | Core and input buffer supply operating from 3.3 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each VCC pin. |
| 12 | OSCin | input | Crystal input that can also be driven by an XO, TCXO, or other external single-ended clock. |
| 13 | OSCout | output | Crystal output; leave floating if OSCin is driven by a single-ended clock. |
| 14 | CLKin_SEL0 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 15 | CLKin0 | input | Universal clock input 0, accepting differential or single-ended signals. |
| 16 | CLKin0* | input | Complementary side of universal clock input 0, used for differential or single-ended operation. |
| 17 | CLKin_SEL1 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 18 | CLKoutB_TYPE0 | input | Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 19 | GND | power_in | Ground pin. |
| 20 | CLKoutB2* | output | Complementary side of differential clock output B2, whose output type is set by the CLKoutB_TYPE pins. |
| 21 | CLKoutB2 | output | Differential clock output B2 whose output type is set by the CLKoutB_TYPE pins. |
| 22 | CLKoutB1* | output | Complementary side of differential clock output B1, whose output type is set by the CLKoutB_TYPE pins. |
| 23 | CLKoutB1 | output | Differential clock output B1 whose output type is set by the CLKoutB_TYPE pins. |
| 24 | VCCOB | power_in | Bank B output buffer supply that can operate from 3.3 V or 2.5 V; the VCCOB pins are internally tied together and each should be bypassed with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 25 | CLKoutB0* | output | Complementary side of differential clock output B0, whose output type is set by the CLKoutB_TYPE pins. |
| 26 | CLKoutB0 | output | Differential clock output B0 whose output type is set by the CLKoutB_TYPE pins. |
| 27 | VCCOB | power_in | Bank B output buffer supply that can operate from 3.3 V or 2.5 V; the VCCOB pins are internally tied together and each should be bypassed with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 28 | GND | power_in | Ground pin. |
| 29 | CLKoutB_TYPE1 | input | Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 30 | CLKin1* | input | Complementary side of universal clock input 1, used for differential or single-ended operation. |
| 31 | CLKin1 | input | Universal clock input 1, accepting differential or single-ended signals. |
| 32 | VCC | power_in | Core and input buffer supply operating from 3.3 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each VCC pin. |
| 33 | REFout | output | LVCMOS reference output, enabled by pulling the REFout_EN pin high. |
| 34 | VCCOC | power_in | REFout output buffer supply that can operate from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 35 | REFout_EN | input | REFout enable input, internally synchronized to the selected clock input; CMOS control input with internal pull-down resistor. |
| 36 | CLKoutA_TYPE1 | input | Bank A output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 37 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-36-EP(6x6) |
| Category | RTC/Clock Chip |
| Pins | 37 |
CAD (KiCad official)
- Symbol:
LMK00306SQ - Footprint:
Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm - 3D model: WQFN-36-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
lmk00306sq-etched.step/lmk00306sq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk00306sq.step/lmk00306sq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
2059cd5e7c3f2565, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMK00306SQ
**Texas Instruments** · Clock Buffers, Drivers · WQFN-36-EP(6x6)
LMK00306SQ from Texas Instruments, in a WQFN-36-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | VCCOA | power_in | Bank A output buffer supply that can operate from 3.3 V or 2.5 V; the VCCOA pins are internally tied together and each should be bypassed with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 3 | CLKoutA0 | output | Differential clock output A0 whose output type is set by the CLKoutA_TYPE pins. |
| 4 | CLKoutA0* | output | Complementary side of differential clock output A0, whose output type is set by the CLKoutA_TYPE pins. |
| 5 | VCCOA | power_in | Bank A output buffer supply that can operate from 3.3 V or 2.5 V; the VCCOA pins are internally tied together and each should be bypassed with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 6 | CLKoutA1 | output | Differential clock output A1 whose output type is set by the CLKoutA_TYPE pins. |
| 7 | CLKoutA1* | output | Complementary side of differential clock output A1, whose output type is set by the CLKoutA_TYPE pins. |
| 8 | CLKoutA2 | output | Differential clock output A2 whose output type is set by the CLKoutA_TYPE pins. |
| 9 | CLKoutA2* | output | Complementary side of differential clock output A2, whose output type is set by the CLKoutA_TYPE pins. |
| 10 | CLKoutA_TYPE0 | input | Bank A output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 11 | VCC | power_in | Core and input buffer supply operating from 3.3 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each VCC pin. |
| 12 | OSCin | input | Crystal input that can also be driven by an XO, TCXO, or other external single-ended clock. |
| 13 | OSCout | output | Crystal output; leave floating if OSCin is driven by a single-ended clock. |
| 14 | CLKin_SEL0 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 15 | CLKin0 | input | Universal clock input 0, accepting differential or single-ended signals. |
| 16 | CLKin0* | input | Complementary side of universal clock input 0, used for differential or single-ended operation. |
| 17 | CLKin_SEL1 | input | Clock input selection pin; CMOS control input with internal pull-down resistor. |
| 18 | CLKoutB_TYPE0 | input | Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 19 | GND | power_in | Ground pin. |
| 20 | CLKoutB2* | output | Complementary side of differential clock output B2, whose output type is set by the CLKoutB_TYPE pins. |
| 21 | CLKoutB2 | output | Differential clock output B2 whose output type is set by the CLKoutB_TYPE pins. |
| 22 | CLKoutB1* | output | Complementary side of differential clock output B1, whose output type is set by the CLKoutB_TYPE pins. |
| 23 | CLKoutB1 | output | Differential clock output B1 whose output type is set by the CLKoutB_TYPE pins. |
| 24 | VCCOB | power_in | Bank B output buffer supply that can operate from 3.3 V or 2.5 V; the VCCOB pins are internally tied together and each should be bypassed with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 25 | CLKoutB0* | output | Complementary side of differential clock output B0, whose output type is set by the CLKoutB_TYPE pins. |
| 26 | CLKoutB0 | output | Differential clock output B0 whose output type is set by the CLKoutB_TYPE pins. |
| 27 | VCCOB | power_in | Bank B output buffer supply that can operate from 3.3 V or 2.5 V; the VCCOB pins are internally tied together and each should be bypassed with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 28 | GND | power_in | Ground pin. |
| 29 | CLKoutB_TYPE1 | input | Bank B output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 30 | CLKin1* | input | Complementary side of universal clock input 1, used for differential or single-ended operation. |
| 31 | CLKin1 | input | Universal clock input 1, accepting differential or single-ended signals. |
| 32 | VCC | power_in | Core and input buffer supply operating from 3.3 V; bypass with a 0.1 uF low-ESR capacitor placed very close to each VCC pin. |
| 33 | REFout | output | LVCMOS reference output, enabled by pulling the REFout_EN pin high. |
| 34 | VCCOC | power_in | REFout output buffer supply that can operate from 3.3 V or 2.5 V; bypass with a 0.1 uF low-ESR capacitor placed very close to the pin. |
| 35 | REFout_EN | input | REFout enable input, internally synchronized to the selected clock input; CMOS control input with internal pull-down resistor. |
| 36 | CLKoutA_TYPE1 | input | Bank A output buffer type selection pin; CMOS control input with internal pull-down resistor. |
| 37 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-36-EP(6x6) |
| Category | RTC/Clock Chip |
| Pins | 37 |
## CAD (KiCad official)
- Symbol: `LMK00306SQ`
- Footprint: `Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm`
- 3D model: WQFN-36-EP(6x6) (KiCad packages3D, STEP)
- 3D model files: `lmk00306sq-etched.step` / `lmk00306sq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmk00306sq.step` / `lmk00306sq.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmk00306) (39 pp, sha256 `2059cd5e7c3f2565`, retrieved 2026-10-10, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmk00306sq-datasheet.pdf)