LMH6704MF

Texas Instruments · Operational Amplifier · SOT-23-6

LMH6704MF from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Amplifier output, which delivers a linear output current of ±55 mA minimum (±90 mA typical) for VOUT ≤ 80 mV and swings ±3.2 V minimum into RL = 100 Ω at ±5 V supplies.
2	VS-	power_in	Negative supply rail, with nominal supplies of ±4 V to ±6 V and an absolute maximum total supply of 13.5 V; the common-mode input voltage must stay between VS- and VS+.
3	+IN	input	Non-inverting input, which carries the signal for gains of +1 and +2 V/V and is tied to ground for a gain of −1 V/V, with a common-mode input range of at least ±1.9 V when VIO ≤ 15 mV.
4	-IN	input	Inverting input, which carries the signal for a gain of −1 V/V, is left open (NC) for a gain of +1 V/V, and is tied to ground for a gain of +2 V/V.
5	DIS	input	TTL-compatible disable input, where a logic low (≤ 0.8 V) disables the amplifier and a logic high (≥ 2.0 V) or a floating pin enables it, and the pin voltage must not go more than 0.8 V below the supply midpoint.
6	VS+	power_in	Positive supply rail, with nominal supplies of ±4 V to ±6 V and an absolute maximum total supply of 13.5 V; the common-mode input voltage must stay between VS- and VS+.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOT-23-6
Category	Amplifiers/Comparators
Pins	6

CAD (KiCad official)

Symbol: LMH6704MF
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)
3D model files: lmh6704mf-etched.step / lmh6704mf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmh6704mf.step / lmh6704mf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (25 pp, sha256 3b9f63265b9ae82f, retrieved 2026-10-10, tier: lcsc)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

# LMH6704MF

**Texas Instruments** · Operational Amplifier · SOT-23-6

LMH6704MF from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which delivers a linear output current of ±55 mA minimum (±90 mA typical) for VOUT ≤ 80 mV and swings ±3.2 V minimum into RL = 100 Ω at ±5 V supplies. |
| 2 | VS- | power_in | Negative supply rail, with nominal supplies of ±4 V to ±6 V and an absolute maximum total supply of 13.5 V; the common-mode input voltage must stay between VS- and VS+. |
| 3 | +IN | input | Non-inverting input, which carries the signal for gains of +1 and +2 V/V and is tied to ground for a gain of −1 V/V, with a common-mode input range of at least ±1.9 V when VIO ≤ 15 mV. |
| 4 | -IN | input | Inverting input, which carries the signal for a gain of −1 V/V, is left open (NC) for a gain of +1 V/V, and is tied to ground for a gain of +2 V/V. |
| 5 | DIS | input | TTL-compatible disable input, where a logic low (≤ 0.8 V) disables the amplifier and a logic high (≥ 2.0 V) or a floating pin enables it, and the pin voltage must not go more than 0.8 V below the supply midpoint. |
| 6 | VS+ | power_in | Positive supply rail, with nominal supplies of ±4 V to ±6 V and an absolute maximum total supply of 13.5 V; the common-mode input voltage must stay between VS- and VS+. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |

## CAD (KiCad official)

- Symbol: `LMH6704MF`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `lmh6704mf-etched.step` / `lmh6704mf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmh6704mf.step` / `lmh6704mf.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmh6704) (25 pp, sha256 `3b9f63265b9ae82f`, retrieved 2026-10-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/lmh6704mf-datasheet.pdf)