3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLMH6657MF
Texas Instruments · Operational Amplifier · SOT-23-5
LMH6657MF from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT | output | Output of the amplifier; the device is short-circuit protected, with output current rated at +80/−90 mA. |
| 2 | V- | power_in | Negative supply rail; the total supply voltage (V+ − V−) must stay within 3 V to 12 V, and the input common-mode range extends 0.5 V below V−. |
| 3 | +IN | input | Noninverting input; the input common-mode voltage range extends from 0.5 V below V− to 1.7 V from V+. |
| 4 | -IN | input | Inverting input of the amplifier, operating within the same input common-mode voltage range as the noninverting input. |
| 5 | V+ | power_in | Positive supply rail; the total supply voltage (V+ − V−) must stay within 3 V to 12 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (V+ − V−), recommended | V+ − V− | 3 | 12 | V | Over operating free-air temperature range | 4 | |
| Operating Temperature | -40 | 85 | °C | Over operating free-air temperature range | 4 | ||
| Supply Voltage (V+ − V−), absolute maximum | V+ − V− | 12.6 | V | 4 | |||
| Differential Input Voltage | VIN | -2.5 | 2.5 | V | 4 | ||
| Input Current | -10 | 10 | mA | 4 | |||
| Voltage at Input/Output pins, lower limit | -0.8 | V | Relative to V− (printed as V− − 0.8 V) | 4 | |||
| Voltage at Input/Output pins, upper limit | 0.8 | V | Relative to V+ (printed as V+ + 0.8 V) | 4 | |||
| Storage Temperature | Tstg | -65 | 100 | °C | 4 | ||
| Junction Temperature | 150 | °C | 4 | ||||
| Soldering Information, infrared or convection | 260 | °C | 20 sec. | 4 | |||
| Soldering Information, wave soldering | 260 | °C | 10 sec. | 4 | |||
| Junction-to-ambient thermal resistance RθJA, DBV (SOT-23-5) | RθJA | 265 | °C/W | Packages soldered directly onto a PCB | 4 | ||
| −3-dB Bandwidth [5 V] | SSBW | 220 | 270 | MHz | AV = +1, VOUT = 200 mVPP | 5 | |
| Large Signal Voltage Gain [5 V] | AVOL | 85 | 95 | dB | VO = 1.25 V to 3.75 V, RL = 2 kΩ to V+/2 | 5 | |
| Large Signal Voltage Gain [5 V] | AVOL | 75 | 85 | dB | VO = 1.5 V to 3.5 V, RL = 150 Ω to V+/2 | 5 | |
| Large Signal Voltage Gain [5 V] | AVOL | 70 | 80 | dB | VO = 2 V to 3 V, RL = 50 Ω to V+/2 | 5 | |
| Input Common-Mode Voltage Range, low [5 V] | CMVR | -0.5 | -0.2 | V | CMRR ≥ 50 dB | 5 | |
| Input Common-Mode Voltage Range, high [5 V] | CMVR | 3 | 3.3 | V | CMRR ≥ 50 dB | 5 | |
| Input Offset Voltage [5 V] | VOS | -5 | 1.1 | 5 | mV | 5 | |
| Input Bias Current [5 V] | IB | -20 | -5 | µA | 6 | ||
| Input Offset Current [5 V] | IOS | 50 | 300 | nA | 6 | ||
| Common-Mode Rejection Ratio [5 V] | CMRR | 72 | 82 | dB | VCM stepped from 0 V to 3.0 V | 6 | |
| Positive Power Supply Rejection Ratio [5 V] | +PSRR | 72 | 82 | dB | V+ = 4.5 V to 5.5 V, VCM = 1 V | 6 | |
| Supply Current per channel [5 V] | IS | 6.2 | 8.5 | mA | No load | 6 | |
| Output Voltage High, RL = 2 kΩ [5 V] | VOH | 4.1 | 4.25 | V | RL = 2 kΩ to V+/2 | 6 | |
| Output Voltage High, RL = 150 Ω [5 V] | VOH | 4 | 4.19 | V | RL = 150 Ω to V+/2 | 6 | |
| Output Voltage High, RL = 75 Ω [5 V] | VOH | 3.85 | 4.15 | V | RL = 75 Ω to V+/2 | 6 | |
| Output Voltage Low, RL = 2 kΩ [5 V] | VOL | 800 | 900 | mV | RL = 2 kΩ to V+/2 | 6 | |
| Output Voltage Low, RL = 150 Ω [5 V] | VOL | 870 | 970 | mV | RL = 150 Ω to V+/2 | 6 | |
| Output Voltage Low, RL = 75 Ω [5 V] | VOL | 885 | 990 | mV | RL = 75 Ω to V+/2 | 6 | |
| Output Current, sourcing [5 V] | IOUT | 40 | 85 | mA | VOUT = 1 V from either rail | 6 | |
| Output Current, sinking [5 V] | IOUT | -40 | 105 | mA | VOUT = 1 V from either rail | 6 | |
| Output Short Circuit Current, sourcing [5 V] | ISC | 100 | 155 | mA | Sourcing to V+/2 | 6 | |
| Output Short Circuit Current, sinking [5 V] | ISC | 100 | 220 | mA | Sinking to V+/2 | 6 | |
| −3-dB Bandwidth [±5 V] | SSBW | 220 | 270 | MHz | AV = +1, VOUT = 200 mVPP | 7 | |
| Large Signal Voltage Gain [±5 V] | AVOL | 87 | 100 | dB | VO = −3.75 V to 3.75 V, RL = 2 kΩ | 7 | |
| Large Signal Voltage Gain [±5 V] | AVOL | 80 | 90 | dB | VO = −3.5 V to 3.5 V, RL = 150 Ω | 7 | |
| Large Signal Voltage Gain [±5 V] | AVOL | 75 | 85 | dB | VO = −3 V to 3 V, RL = 50 Ω | 7 | |
| Input Common-Mode Voltage Range, low [±5 V] | CMVR | -5.5 | -5.2 | V | CMRR ≥ 50 dB | 7 | |
| Input Common-Mode Voltage Range, high [±5 V] | CMVR | 3 | 3.3 | V | CMRR ≥ 50 dB | 7 | |
| Input Offset Voltage [±5 V] | VOS | -5 | 1 | 5 | mV | 7 | |
| Input Bias Current [±5 V] | IB | -20 | -5 | µA | 8 | ||
| Input Offset Current [±5 V] | IOS | 50 | 300 | nA | 8 | ||
| Common-Mode Rejection Ratio [±5 V] | CMRR | 75 | 84 | dB | VCM stepped from −5 V to 3 V | 8 | |
| Positive Power Supply Rejection Ratio [±5 V] | +PSRR | 75 | 82 | dB | V+ = 4.5 V to 5.5 V, VCM = −4 V | 8 | |
| Negative Power Supply Rejection Ratio [±5 V] | −PSRR | 78 | 85 | dB | V− = −4.5 V to −5.5 V | 8 | |
| Supply Current per channel [±5 V] | IS | 6.5 | 9 | mA | No load | 8 | |
| Output Voltage High, RL = 2 kΩ [±5 V] | VOH | 4.1 | 4.25 | V | RL = 2 kΩ | 8 | |
| Output Voltage High, RL = 150 Ω [±5 V] | VOH | 4 | 4.2 | V | RL = 150 Ω | 8 | |
| Output Voltage High, RL = 75 Ω [±5 V] | VOH | 3.85 | 4.18 | V | RL = 75 Ω | 8 | |
| Output Voltage Low, RL = 2 kΩ [±5 V] | VOL | -4.19 | -4.05 | V | RL = 2 kΩ | 8 | |
| Output Voltage Low, RL = 150 Ω [±5 V] | VOL | -4.05 | -3.9 | V | RL = 150 Ω | 8 | |
| Output Voltage Low, RL = 75 Ω [±5 V] | VOL | -4 | -3.8 | V | RL = 75 Ω | 8 | |
| Output Current, sourcing [±5 V] | IOUT | 45 | 100 | mA | VOUT = 1 V from either rail | 8 | |
| Output Current, sinking [±5 V] | IOUT | -45 | -110 | mA | VOUT = 1 V from either rail | 8 | |
| Output Short Circuit Current, sourcing to ground [±5 V] | ISC | 120 | 180 | mA | Sourcing to Ground | 8 | |
| Output Short Circuit Current, sinking to ground [±5 V] | ISC | 120 | 230 | mA | Sinking to Ground | 8 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LMH6657MF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmh6657mf-etched.step/lmh6657mf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmh6657mf.step/lmh6657mf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
45eccb786e78d2cc, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).