Generated by kicad-footprint-generator · KiCad file format 20260206
LMH6643MM
Texas Instruments · Operational Amplifier · VSSOP-8
LMH6643MM from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A output; output voltage range extends to within 40 mV of either supply rail, with linear output current of ±75 mA. |
| 2 | -IN A | input | Channel A inverting input; the input common-mode range extends 0.5 V below V- and 1 V from V+, and input overdrive should be limited so diode current stays at or below 10 mA. |
| 3 | +IN A | input | Channel A non-inverting input; the input common-mode range extends 0.5 V below V- and 1 V from V+, and input overdrive should be limited so diode current stays at or below 10 mA. |
| 4 | V- | power_in | Negative supply rail; the total supply (V+ - V-) is specified from 2.7 V to 12.8 V, with an absolute maximum of 13.5 V. |
| 5 | +IN B | input | Channel B non-inverting input; the input common-mode range extends 0.5 V below V- and 1 V from V+, and input overdrive should be limited so diode current stays at or below 10 mA. |
| 6 | -IN B | input | Channel B inverting input; the input common-mode range extends 0.5 V below V- and 1 V from V+, and input overdrive should be limited so diode current stays at or below 10 mA. |
| 7 | OUT B | output | Channel B output; output voltage range extends to within 40 mV of either supply rail, with linear output current of ±75 mA. |
| 8 | V+ | power_in | Positive supply rail; the total supply (V+ - V-) is specified from 2.7 V to 12.8 V, with an absolute maximum of 13.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (V+ - V-), absolute maximum | 13.5 | V | 5 | ||||
| Differential input voltage | VIN | -2.5 | 2.5 | V | 5 | ||
| Input current | -10 | 10 | mA | 5 | |||
| Junction temperature | 150 | °C | 5 | ||||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage (V+ - V-), recommended | 2.7 | 12.8 | V | 5 | |||
| Operating temperature range | -40 | 85 | °C | 5 | |||
| -3 dB bandwidth (3V) | BW | 80 | 115 | MHz | AV = +1, VOUT = 200mVPP | 6 | |
| Input offset voltage (3V), LMH6643 limit | VOS | -3.4 | 1 | 3.4 | mV | 6 | |
| Input offset voltage (3V), temperature extremes | VOS | -7 | 7 | mV | AT TEMPERATURE EXTREMES | 6 | |
| Input bias current (3V) | IB | -3.25 | -1.5 | -2.6 | µA | 6 | |
| Input offset current (3V), 25°C | IOS | 20 | 800 | nA | 6 | ||
| Input offset current (3V), temperature extremes | IOS | 1000 | nA | AT TEMPERATURE EXTREMES | 6 | ||
| Common mode rejection ratio (3V) | CMRR | 72 | 95 | dB | VCM Stepped from 0V to 1.5V | 7 | |
| Large signal voltage gain (3V), RL = 2kΩ | AVOL | 75 | 80 | 96 | dB | VO = 0.5V to 2.5V, RL = 2kΩ to V+/2 | 7 |
| Output swing high (3V), RL = 2kΩ | VO | 2.9 | 2.98 | V | RL = 2kΩ to V+/2, VID = 200mV | 7 | |
| Output swing high (3V), RL = 150Ω | VO | 2.8 | 2.93 | V | RL = 150Ω to V+/2, VID = 200mV | 7 | |
| Output swing low (3V), RL = 2kΩ | VO | 25 | 75 | mV | RL = 2kΩ to V+/2, VID = -200mV | 7 | |
| Output swing low (3V), RL = 150Ω | VO | 75 | 150 | mV | RL = 150Ω to V+/2, VID = -200mV | 7 | |
| Output short circuit current, sourcing (3V) | ISC | 35 | 50 | 95 | mA | Sourcing to V+/2, VID = 200mV | 7 |
| Output short circuit current, sinking (3V) | ISC | 40 | 55 | 110 | mA | Sinking to V+/2, VID = -200mV | 7 |
| Output current (3V) | IOUT | -65 | 65 | mA | VOUT = 0.5V from either supply | 7 | |
| Supply current per channel (3V), 25°C | IS | 2.7 | 4 | mA | No Load (per channel) | 7 | |
| Supply current per channel (3V), temperature extremes | IS | 4.5 | mA | No Load (per channel), AT TEMPERATURE EXTREMES | 7 | ||
| -3 dB bandwidth (5V) | BW | 90 | 120 | MHz | AV = +1, VOUT = 200mVPP | 8 | |
| Input offset voltage (5V), LMH6643 limit | VOS | -3.4 | 1 | 3.4 | mV | 8 | |
| Input offset voltage (5V), temperature extremes | VOS | -7 | 7 | mV | AT TEMPERATURE EXTREMES | 8 | |
| Input bias current (5V) | IB | -3.25 | -1.7 | -2.6 | µA | 8 | |
| Common mode rejection ratio (5V) | CMRR | 72 | 95 | dB | VCM Stepped from 0V to 3.5V | 8 | |
| Large signal voltage gain (5V), RL = 2kΩ | AVOL | 82 | 86 | 98 | dB | VO = 0.5V to 4.50V, RL = 2kΩ to V+/2 | 8 |
| Output swing high (5V), RL = 2kΩ | VO | 4.9 | 4.98 | V | RL = 2kΩ to V+/2, VID = 200mV | 9 | |
| Output swing high (5V), RL = 150Ω | VO | 4.65 | 4.9 | V | RL = 150Ω to V+/2, VID = 200mV | 9 | |
| Output swing low (5V), RL = 2kΩ | VO | 25 | 100 | mV | RL = 2kΩ to V+/2, VID = -200mV | 9 | |
| Output swing low (5V), RL = 150Ω | VO | 100 | 150 | mV | RL = 150Ω to V+/2, VID = -200mV | 9 | |
| Output short circuit current, sourcing (5V) | ISC | 40 | 55 | 115 | mA | Sourcing to V+/2, VID = 200mV | 9 |
| Output short circuit current, sinking (5V) | ISC | 55 | 70 | 140 | mA | Sinking to V+/2, VID = -200mV | 9 |
| Output current (5V) | IOUT | -70 | 70 | mA | VO = 0.5V from either supply | 9 | |
| Supply current per channel (5V), 25°C | IS | 2.7 | 4.25 | mA | No Load (per channel) | 9 | |
| Supply current per channel (5V), temperature extremes | IS | 5 | mA | No Load (per channel), AT TEMPERATURE EXTREMES | 9 | ||
| -3 dB bandwidth (±5V) | BW | 95 | 130 | MHz | AV = +1, VOUT = 200mVPP | 10 | |
| Input offset voltage (±5V), LMH6643 limit | VOS | -3.4 | 1 | 3.4 | mV | 10 | |
| Input offset voltage (±5V), temperature extremes | VOS | -7 | 7 | mV | AT TEMPERATURE EXTREMES | 10 | |
| Input bias current (±5V) | IB | -3.25 | -1.6 | -2.6 | µA | 10 | |
| Common mode rejection ratio (±5V) | CMRR | 74 | 95 | dB | VCM Stepped from -5V to 3.5V | 10 | |
| Large signal voltage gain (±5V), RL = 2kΩ | AVOL | 84 | 88 | 96 | dB | VO = -4.5V to 4.5V, RL = 2kΩ | 11 |
| Output swing high (±5V), RL = 2kΩ | VO | 4.9 | 4.96 | V | RL = 2kΩ, VID = 200mV | 11 | |
| Output swing high (±5V), RL = 150Ω | VO | 4.65 | 4.8 | V | RL = 150Ω, VID = 200mV | 11 | |
| Output swing low (±5V), RL = 2kΩ | VO | -4.96 | -4.9 | V | RL = 2kΩ, VID = -200mV | 11 | |
| Output swing low (±5V), RL = 150Ω | VO | -4.8 | -4.65 | V | RL = 150Ω, VID = -200mV | 11 | |
| Output short circuit current, sourcing (±5V) | ISC | 35 | 60 | 115 | mA | Sourcing to ground, VID = 200mV | 11 |
| Output short circuit current, sinking (±5V) | ISC | 65 | 85 | 145 | mA | Sinking to ground, VID = -200mV | 11 |
| Output current (±5V) | IOUT | -75 | 75 | mA | VO = 0.5V from either supply | 11 | |
| Supply current per channel (±5V), 25°C | IS | 2.7 | 4.5 | mA | No Load (per channel) | 11 | |
| Supply current per channel (±5V), temperature extremes | IS | 5.5 | mA | No Load (per channel), AT TEMPERATURE EXTREMES | 11 | ||
| Thermal resistance, junction-to-ambient (DGK08A VSSOP-8) | RθJA | 235 | °C/W | Packages soldered directly onto a PC board | 5 |
CAD (KiCad official)
- Symbol:
LMH6643MM - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmh6643mm-etched.step/lmh6643mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmh6643mm.step/lmh6643mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
b81ea0059a44ea3a, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).