← Commit history

Initial commit: component/lmh6401irmzr

Ray ·a39da28059 ·
2 files changed +93
README.mdadded+59
@@ -0,0 +1,59 @@+# LMH6401IRMZR++**Texas Instruments** · Programmable / Variable Gain Amplifiers (PGA/VGA) · UQFN-16(3x3)++LMH6401IRMZR from Texas Instruments, in a UQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDI | input | Serial interface (SPI) input data pin. Receives register write data clocked in on SCLK when CS is asserted low. |+| 2 | INP | input | Positive differential analog signal input pin. Part of the 100-ohm differential input impedance signal path. |+| 3 | INM | input | Negative differential analog signal input pin. Part of the 100-ohm differential input impedance signal path. |+| 4 | SDO | output | Serial interface (SPI) output data pin. Provides read-back data from the register map. |+| 5 | VS- | power_in | Negative supply voltage. Tied to GND for single-supply 5.0-V operation, or to a negative rail for split-supply operation. Supply range: (VS+) - (VS-) = 4.0 V to 5.25 V. |+| 6 | PD | input | Power-down control pin. Logic 0 = amplifier enabled; logic 1 = amplifier disabled. |+| 7 | VOCM | input | Output common-mode voltage set pin. Drive this pin to set the amplifier's differential output common-mode level, typically to match the input common-mode of the downstream ADC. |+| 8 | VS+ | power_in | Positive supply voltage. Nominal 5.0 V (range 4.0 V to 5.25 V). Bypass to GND close to the pin. |+| 9 | GND | power_in | Ground reference for the device. Connect to the PCB ground plane. |+| 10 | OUTM | output | Negative differential output pin. Drives the negative side of the differential output through an internal 10-ohm series resistor. |+| 11 | OUTP | output | Positive differential output pin. Drives the positive side of the differential output through an internal 10-ohm series resistor. |+| 12 | GND | power_in | Ground reference for the device. Connect to the PCB ground plane. |+| 13 | VS+ | power_in | Positive supply voltage. Nominal 5.0 V (range 4.0 V to 5.25 V). Bypass to GND close to the pin. |+| 14 | SCLK | input | Serial interface (SPI) clock input. Clocks SDI in and SDO out while CS is asserted low. |+| 15 | CS | input | Active-low SPI chip select. Assert low to begin a SPI transaction; de-assert high to complete the transaction and latch data. |+| 16 | VS- | power_in | Negative supply voltage. Tied to GND for single-supply 5.0-V operation, or to a negative rail for split-supply operation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | UQFN-16(3x3) |+| Category | Amplifiers/Comparators |+| Pins | 16 |++## Ordering variants++Same part, different packaging or reel option.++- `LMH6401IRMZR`+- `LMH6401IRMZT`++## CAD (KiCad official)++- Symbol: `LMH6401IRMZR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: UQFN-16(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmh6401) (47 pp, sha256 `b520d7352b5a5bda`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmh6401irmzr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lmh6401irmzr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Programmable / Variable Gain Amplifiers (PGA/VGA), UQFN-16(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "amplifiers-comparators",+    "lmh6401irmzr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lmh6401irmzr.kicad_sym",+    "lmh6401irmzr.kicad_mod",+    "lmh6401irmzr.glb",+    "lmh6401irmzr.step",+    "lmh6401irmzr.lbr",+    "docs/hero.png",+    "docs/lmh6401irmzr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file