3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMH2180SD
Texas Instruments · Clock Buffers, Drivers · WSON-8-EP(3x3)
LMH2180SD from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Voltage supply connection, specified for 2.4V to 5.0V operation measured with respect to VSS. |
| 2 | IN 1 | input | Input 1 of the buffer, internally biased to 1V so it can be AC coupled without external bias resistors. |
| 3 | IN 2 | input | Input 2 of the buffer, internally biased to 1V so it can be AC coupled without external bias resistors. |
| 4 | ENABLE 2 | input | Enable buffer 2; drive above 1.2V minimum to enable and below 0.6V maximum to disable the buffer. |
| 5 | VSS | power_in | Ground connection, used as the 0V reference for all voltages and the supply return. |
| 6 | OUT 2 | output | Output 2 of the buffer, a rail-to-rail unity-gain output that may need a series resistor when driving large capacitive loads. |
| 7 | OUT 1 | output | Output 1 of the buffer, a rail-to-rail unity-gain output that may need a series resistor when driving large capacitive loads. |
| 8 | ENABLE 1 | input | Enable buffer 1; drive above 1.2V minimum to enable and below 0.6V maximum to disable the buffer. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(3x3) |
| Category | RTC/Clock Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (V+ - V-) recommended operating range | 2.4 | 5 | V | 3 | |||
| Temperature Range | -40 | 85 | °C | 3 | |||
| Supply Voltages (V+ - V-) absolute maximum | 5.5 | V | 2 | ||||
| ESD Tolerance Human Body Model | 2000 | V | Human Body Model | 2 | |||
| ESD Tolerance Machine Model | 200 | V | Machine Model | 2 | |||
| ESD Tolerance Charged Device Model | 1000 | V | Charged Device Model | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Soldering Information Infrared or Convection | 235 | °C | Infrared or Convection (35 sec.) | 2 | |||
| Package Thermal Resistance 8-Pin WSON junction-to-ambient | θJA | 217 | °C/W | 3 | |||
| 2.7V Supply Current Enable1,2 = VDD, No Load | IS | 2.3 | 2.9 | mA | Enable1,2 = VDD ; No Load | 3 | |
| 2.7V Supply Current Enable1 = VDD, Enable2 = VSS, No Load | IS | 1.3 | 1.6 | mA | Enable1 = VDD , Enable2 = VSS , No Load | 3 | |
| 2.7V Supply Current Enable1,2 = VSS, No Load | IS | 30 | 46 | μA | Enable1,2 = VSS ; No Load | 3 | |
| 2.7V Power Supply Rejection Ratio DC (3.0V to 5.0V) | PSRR | 64 | 68 | dB | DC (3.0V to 5.0V) | 3 | |
| 2.7V Small Signal Voltage Gain | ACL | 0.95 | 1 | 1.05 | V/V | VIN = 0.2 VPP | 4 |
| 2.7V Output Offset Voltage | VOS | -0.5 | 18 | mV | 4 | ||
| 2.7V Output Short-Circuit Current Sourcing | ISC | -25 | -21 | -18 | mA | Sourcing, VIN = VDD, VOUT = VSS | 4 |
| 2.7V Output Short-Circuit Current Sinking | ISC | 15 | 23 | 25 | mA | Sinking, VIN = VSS, VOUT = VDD | 4 |
| 2.7V Output Swing Positive | VO | 2.65 | 2.69 | V | VIN = VDD | 4 | |
| 2.7V Output Swing Negative | VO | 19 | 37 | mV | VIN = VSS | 4 | |
| 2.7V Enable High Active Minimum Voltage | Ven_hmin | 1.2 | V | 4 | |||
| 2.7V Enable Low Inactive Maximum Voltage | Ven_lmax | 0.6 | V | 4 | |||
| 5V Supply Current Enable1,2 = VDD, No Load | IS | 3.4 | 4.1 | mA | Enable1,2 = VDD ; No Load | 5 | |
| 5V Supply Current Enable1 = VDD, Enable2 = VSS, No Load | IS | 1.8 | 2.3 | mA | Enable1 = VDD, Enable2 = VSS ; No Load | 5 | |
| 5V Supply Current Enable1,2 = VSS, No Load | IS | 32 | 49 | μA | Enable1,2 = VSS ; No Load | 5 | |
| 5V Power Supply Rejection Ratio DC (3.0V to 5.0V) | PSRR | 64 | 68 | dB | DC (3.0V to 5.0V) | 5 | |
| 5V Small Signal Voltage Gain | ACL | 0.95 | 1 | 1.05 | V/V | VIN = 0.2 VPP | 5 |
| 5V Output Offset Voltage | VOS | -1.4 | 22 | mV | 5 | ||
| 5V Output Short-Circuit Current Sourcing | ISC | -90 | -80 | -62 | mA | Sourcing, VIN = VDD, VOUT = VSS | 5 |
| 5V Output Short-Circuit Current Sinking | ISC | 43 | 60 | 65 | mA | Sinking, VIN = VSS, VOUT = VDD | 5 |
| 5V Output Swing Positive | VO | 4.95 | 4.99 | V | VIN = VDD | 5 | |
| 5V Output Swing Negative | VO | 10 | 50 | mV | VIN = VSS | 5 | |
| 5V Enable High Active Minimum Voltage | Ven_hmin | 1.2 | V | 5 | |||
| 5V Enable Low Inactive Maximum Voltage | Ven_lmax | 0.6 | V | 5 |
CAD (KiCad official)
- Symbol:
LMH2180SD - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lmh2180sd-etched.step/lmh2180sd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmh2180sd.step/lmh2180sd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
44ffd23acb778e04, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).