main
Ray Publish 0.1.0 35a72cd
{
  "slug": "lmh1228rtvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Pre-ordered Chips, WQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "lmh1228rtvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmh1228rtvr.kicad_sym",
    "lmh1228rtvr.kicad_mod",
    "lmh1228rtvr.glb",
    "lmh1228rtvr.step",
    "lmh1228rtvr.lbr",
    "docs/hero.png",
    "docs/lmh1228rtvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmh1228rtvr-hero.glb",
    "lmh1228rtvr-hero.overlay.json"
  ],
  "component": {
    "mpn": "LMH1228RTVR",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lmh1228.pdf",
    "parts": {
      "symbol": "lmh1228rtvr.kicad_sym",
      "footprint": "lmh1228rtvr.kicad_mod",
      "model_3d": "lmh1228rtvr-hero.glb",
      "model_3d_plain": "lmh1228rtvr.glb",
      "model_3d_step": "lmh1228rtvr-etched.step",
      "model_3d_step_plain": "lmh1228rtvr.step",
      "lbr": "lmh1228rtvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2676895",
      "digikey": "LMH1228RTVR-ND",
      "mouser": "595-LMH1228RTVR"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T07:04:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LMH1228RTVR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LMH1228RTVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDI_OUT1+",
        "type": "bidirectional",
        "description": "Single-ended complementary 75-Ω line-side cable driver output with on-chip 75-Ω termination, AC-coupled through 4.7 µF to a BNC, with nominal 800 mVp-p output amplitude."
      },
      {
        "number": "2",
        "name": "SDI_OUT1-",
        "type": "bidirectional",
        "description": "Complementary line-side cable driver output of SDI_OUT1±, AC-coupled through 4.7 µF and terminated with an external 75-Ω resistor to GND."
      },
      {
        "number": "3",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "4",
        "name": "OUT0_SEL",
        "type": "input",
        "description": "LVCMOS control that enables the 100-Ω host-side loop-back driver at OUT0± when set low; internally pulled high by default (OUT0 disabled)."
      },
      {
        "number": "5",
        "name": "RSV6",
        "type": "input",
        "description": "Reserved LVCMOS input that must be tied high to VIN through a 1-kΩ resistor, or overridden by register control; internally pulled low by default."
      },
      {
        "number": "6",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "7",
        "name": "SDI_OUT2-",
        "type": "output",
        "description": "Complementary secondary line-side 75-Ω cable driver output, AC-coupled through 4.7 µF and terminated with an external 75-Ω resistor to GND."
      },
      {
        "number": "8",
        "name": "SDI_OUT2+",
        "type": "output",
        "description": "Secondary line-side 75-Ω cable driver output with on-chip 75-Ω termination, AC-coupled through 4.7 µF to a BNC; enabled by SDI_OUT2_SEL."
      },
      {
        "number": "9",
        "name": "HOST_EQ0",
        "type": "input",
        "description": "4-level input that selects the IN0± equalizer mode and boost setting, with F (float) recommended for normal operation; it also sets the OUT0 VOD and de-emphasis."
      },
      {
        "number": "10",
        "name": "RSV1",
        "type": "unconnected",
        "description": "Reserved pin; do not connect."
      },
      {
        "number": "11",
        "name": "SS_N / ADDR0",
        "type": "input",
        "description": "In SPI mode (MODE_SEL = F) this is the active-low slave select, internally pulled high; in SMBus mode (MODE_SEL = L) it is the 4-level address strap ADDR0 read at power-up."
      },
      {
        "number": "12",
        "name": "MODE_SEL",
        "type": "input",
        "description": "4-level input that selects the serial interface: F selects SPI, L selects SMBus, and H or R are reserved for factory testing and must not be used."
      },
      {
        "number": "13",
        "name": "MOSI / SDA",
        "type": "input",
        "description": "In SPI mode this is the SPI data input (2.5-V LVCMOS, external pullup recommended); in SMBus mode it is the open-drain bidirectional SDA line, 3.3-V tolerant, requiring an external pullup."
      },
      {
        "number": "14",
        "name": "SDI_OUT2_SEL",
        "type": "input",
        "description": "LVCMOS control that enables the 75-Ω output driver at SDI_OUT2± when set low; internally pulled high by default (SDI_OUT2 disabled)."
      },
      {
        "number": "15",
        "name": "RSV2",
        "type": "unconnected",
        "description": "Reserved pin; do not connect."
      },
      {
        "number": "16",
        "name": "RSV3",
        "type": "unconnected",
        "description": "Reserved pin; do not connect."
      },
      {
        "number": "17",
        "name": "OUT_CTRL",
        "type": "input",
        "description": "4-level input that selects the routed signal path, enabling the reclocker in normal operation (F) or bypassing it (R or L); it may be overridden by register control."
      },
      {
        "number": "18",
        "name": "IN0-",
        "type": "input",
        "description": "Complementary differential input from the host video processor with on-chip 100-Ω differential termination, requiring an external 4.7-µF AC-coupling capacitor for SMPTE applications."
      },
      {
        "number": "19",
        "name": "IN0+",
        "type": "input",
        "description": "Differential input from the host video processor with on-chip 100-Ω differential termination, requiring an external 4.7-µF AC-coupling capacitor for SMPTE applications."
      },
      {
        "number": "20",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "21",
        "name": "VDD_CDR",
        "type": "power_in",
        "description": "Supplies the reclocker circuitry; connected to the same 2.5 V ±5% supply as VIN (2.375 V to 2.625 V)."
      },
      {
        "number": "22",
        "name": "OUT0-",
        "type": "output",
        "description": "Complementary differential 100-Ω host-side output to the downstream video processor, with on-chip 100-Ω termination and AC coupling via 4.7 µF."
      },
      {
        "number": "23",
        "name": "OUT0+",
        "type": "output",
        "description": "Differential 100-Ω host-side output to the downstream video processor, with on-chip 100-Ω termination and AC coupling via 4.7 µF."
      },
      {
        "number": "24",
        "name": "SDI_VOD",
        "type": "input",
        "description": "4-level input that selects one of four line-side cable driver output amplitudes (H about +5%, F 800 mVp-p nominal, R about +10%, L about -5%)."
      },
      {
        "number": "25",
        "name": "RSV4",
        "type": "unconnected",
        "description": "Reserved pin; do not connect."
      },
      {
        "number": "26",
        "name": "RSV5",
        "type": "unconnected",
        "description": "Reserved pin; do not connect."
      },
      {
        "number": "27",
        "name": "LOCK_N",
        "type": "output",
        "description": "3.3-V tolerant open-drain reclocker lock indicator, pulled low when CDR lock is acquired; requires an external pullup to a logic supply and can be reconfigured to SD_N or INT_N."
      },
      {
        "number": "28",
        "name": "MISO / ADDR1",
        "type": "output",
        "description": "In SPI mode this is the 2.5-V LVCMOS SPI data output, which floats when SS_N is high; in SMBus mode it is the 4-level address strap ADDR1 read at power-up."
      },
      {
        "number": "29",
        "name": "SCK / SCL",
        "type": "input",
        "description": "In SPI mode this is the SPI serial clock input (2.5-V LVCMOS, external pullup recommended); in SMBus mode it is the open-drain SCL clock, 3.3-V tolerant, requiring an external pullup."
      },
      {
        "number": "30",
        "name": "VIN",
        "type": "power_in",
        "description": "Connected to an external 2.5-V ±5% supply (2.375 V to 2.625 V) for the device; absolute maximum supply is 2.75 V."
      },
      {
        "number": "31",
        "name": "VDD_LDO",
        "type": "power_out",
        "description": "Output of the internal 1.8-V LDO that powers internal circuitry only and requires external 1-µF and 0.1-µF bypass capacitors to VSS."
      },
      {
        "number": "32",
        "name": "ENABLE",
        "type": "input",
        "description": "LVCMOS power-down control: logic high enables normal operation and logic low places the device in Power-Down Mode; internally pulled high by default."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: These pins are multiplexed by serial-interface mode (SPI vs SMBus, selected by MODE_SEL). The name a; Reserved pins RSV1 to RSV5 are documented only as 'Do not connect'; their types are recorded as unco; The exposed pad is not a numbered lead. It is listed as 'EP' in the datasheet pin table and pin-out ",
          "exposed pad 33 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 45,
        "cost_usd": 0.0446,
        "at": "2026-11-13T07:04:33"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lmh1228.pdf",
        "pages": 45,
        "sha256": "5fc09840bc5866cd",
        "source_tier": "mfr"
      },
      "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "QFN",
        "height_mm": 0.75,
        "height_basis": "datasheet A, midpoint of min and max",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lmh1228rtvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.02,
          5.02,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "672b3770ae0945095ce24abd3f32fcb04f0db2a1eeef421197fca22c1c8177ac",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmh1228rtvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.02,
          5.02,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "68ac5f59cea74f8d1770d652284e4c30b9e1c8ea94a8dbcecd9d5d71ab4dbfe0",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RTV0032E",
      "source_page": 49,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.85,
          5.15
        ]
      },
      "E1": {
        "nom_mm": 5.0,
        "range_mm": [
          4.85,
          5.15
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          0.7,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lmh1228rtvr.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}