component
LMH0376SQX
Public Made by Adomby adom
Texas Instruments Video Interface ICs, WQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+86@@ -0,0 +1,86 @@+# LMH0376SQX++**Texas Instruments** · Video Interface ICs · WQFN-48-EP(7x7)++LMH0376SQX from Texas Instruments, in a WQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDI0 | input | Positive input of differential serial data input 0 with 100Ω internal termination. |+| 2 | SDI0 | input | Negative input of differential serial data input 0 with 100Ω internal termination. |+| 3 | VCC | power_in | Positive power supply, 2.5V nominal. |+| 4 | SDI1 | input | Positive input of differential serial data input 1 with 100Ω internal termination. |+| 5 | SDI1 | input | Negative input of differential serial data input 1 with 100Ω internal termination. |+| 6 | VCC | power_in | Positive power supply, 2.5V nominal. |+| 7 | SDI2 | input | Positive input of differential serial data input 2 with 100Ω internal termination. |+| 8 | SDI2 | input | Negative input of differential serial data input 2 with 100Ω internal termination. |+| 9 | ENABLE | input | Device enable control with internal pullup; H = enabled, L = powered down. |+| 10 | SDI3 | input | Positive input of differential serial data input 3 with 100Ω internal termination. |+| 11 | SDI3 | input | Negative input of differential serial data input 3 with 100Ω internal termination. |+| 12 | VCC | power_in | Positive power supply, 2.5V nominal. |+| 13 | VEE | power_in | Ground connection, negative power supply. |+| 14 | VCC | power_in | Positive power supply, 2.5V nominal. |+| 15 | BYPASS | input | Reclocker bypass control with internal pulldown; H = bypassed, L = normal operation. |+| 16 | MUTE | input | Output mute control with internal pullup; H = normal, L = SDO0 and SDO1 muted. |+| 17 | SPI_EN | input | SPI register access enable with internal pulldown; H = SPI mode, L = pin mode. |+| 18 | XTAL_IN | input | External 27 MHz crystal or clock input for optional reference; connect to GND for referenceless mode. |+| 19 | VEE | power_in | Ground connection, negative power supply. |+| 20 | VEE | power_in | Ground connection, negative power supply. |+| 21 | VEE | power_in | Ground connection, negative power supply. |+| 22 | XTAL_OUT | output | External 27 MHz crystal or clock output for cascading to additional devices. |+| 23 | VEE | power_in | Ground connection, negative power supply. |+| 24 | LOCK_DETECT | output | PLL lock detect status output, active high; H = locked, L = unlocked. |+| 25 | VEE | power_in | Ground connection, negative power supply. |+| 26 | VEE | power_in | Ground connection, negative power supply. |+| 27 | VEE | power_in | Ground connection, negative power supply. |+| 28 | SDO1 | output | Positive output of differential serial data output 1 or recovered clock (LVDS). |+| 29 | SDO1 | output | Negative output of differential serial data output 1 or recovered clock (LVDS). |+| 30 | VCC | power_in | Positive power supply, 2.5V nominal. |+| 31 | VCC | power_in | Positive power supply, 2.5V nominal. |+| 32 | SDO0 | output | Positive output of differential serial data output 0 (LVDS). |+| 33 | SDO0 | output | Negative output of differential serial data output 0 (LVDS). |+| 34 | VCC | power_in | Positive power supply, 2.5V nominal. |+| 35 | VCC | power_in | Positive power supply, 2.5V nominal. |+| 36 | SD/HD | output | Data rate range indication output; H = SD (270 Mbps), L = HD/3G or PLL unlocked. |+| 37 | SCO_EN | input | Serial clock output enable for SDO1 with internal pulldown; H = SDO1 is clock, L = SDO1 is data. |+| 38 | VEE | power_in | Ground connection, negative power supply. |+| 39 | VEE | power_in | Ground connection, negative power supply. |+| 40 | VEE | power_in | Ground connection, negative power supply. |+| 41 | VEE | power_in | Ground connection, negative power supply. |+| 42 | VEE | power_in | Ground connection, negative power supply. |+| 43 | LF1 | passive | Loop filter connection; connect 56 nF capacitor between LF1 and LF2 for PLL stabilization. |+| 44 | LF2 | passive | Loop filter connection; connect 56 nF capacitor between LF1 and LF2 for PLL stabilization. |+| 45 | RATE0 | input | Data rate select input with internal pulldown; selects data rate mode in conjunction with RATE1. |+| 46 | RATE1 | input | Data rate select input with internal pulldown; selects data rate mode in conjunction with RATE0. |+| 47 | SEL0 | input | Input channel select with internal pulldown; selects serial input channel in conjunction with SEL1. |+| 48 | SEL1 | input | Input channel select with internal pulldown; selects serial input channel in conjunction with SEL0. |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-48-EP(7x7) |+| Category | Interface |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `LMH0376SQX`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: WQFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `lmh0376sqx-etched.step` / `lmh0376sqx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmh0376sqx.step` / `lmh0376sqx.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lmh0376) (43 pp, sha256 `dd5932d29bb5ff31`, retrieved 2026-09-21, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lmh0376sqx-datasheet.pdf)
page.jsonadded+391@@ -0,0 +1,391 @@+{+ "slug": "lmh0376sqx",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Video Interface ICs, WQFN-48-EP(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "lmh0376sqx",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lmh0376sqx.kicad_sym",+ "lmh0376sqx.kicad_mod",+ "lmh0376sqx.glb",+ "lmh0376sqx.step",+ "lmh0376sqx.lbr",+ "docs/hero.png",+ "docs/lmh0376sqx-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "LMH0376SQX",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-48-EP(7x7)",+ "pin_count": 49,+ "category": "Interface",+ "subcategory": "Video Interface ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lmh0376",+ "parts": {+ "symbol": "lmh0376sqx.kicad_sym",+ "footprint": "lmh0376sqx.kicad_mod",+ "model_3d": "lmh0376sqx-etched.glb",+ "model_3d_plain": "lmh0376sqx.glb",+ "model_3d_step": "lmh0376sqx-etched.step",+ "model_3d_step_plain": "lmh0376sqx.step",+ "lbr": "lmh0376sqx.lbr"+ },+ "distributor_links": {+ "lcsc": "C2676891"+ },+ "pins": [+ {+ "number": "1",+ "name": "SDI0",+ "type": "input",+ "description": "Positive input of differential serial data input 0 with 100Ω internal termination."+ },+ {+ "number": "2",+ "name": "SDI0",+ "type": "input",+ "description": "Negative input of differential serial data input 0 with 100Ω internal termination."+ },+ {+ "number": "3",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 2.5V nominal."+ },+ {+ "number": "4",+ "name": "SDI1",+ "type": "input",+ "description": "Positive input of differential serial data input 1 with 100Ω internal termination."+ },+ {+ "number": "5",+ "name": "SDI1",+ "type": "input",+ "description": "Negative input of differential serial data input 1 with 100Ω internal termination."+ },+ {+ "number": "6",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 2.5V nominal."+ },+ {+ "number": "7",+ "name": "SDI2",+ "type": "input",+ "description": "Positive input of differential serial data input 2 with 100Ω internal termination."+ },+ {+ "number": "8",+ "name": "SDI2",+ "type": "input",+ "description": "Negative input of differential serial data input 2 with 100Ω internal termination."+ },+ {+ "number": "9",+ "name": "ENABLE",+ "type": "input",+ "description": "Device enable control with internal pullup; H = enabled, L = powered down."+ },+ {+ "number": "10",+ "name": "SDI3",+ "type": "input",+ "description": "Positive input of differential serial data input 3 with 100Ω internal termination."+ },+ {+ "number": "11",+ "name": "SDI3",+ "type": "input",+ "description": "Negative input of differential serial data input 3 with 100Ω internal termination."+ },+ {+ "number": "12",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 2.5V nominal."+ },+ {+ "number": "13",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 2.5V nominal."+ },+ {+ "number": "15",+ "name": "BYPASS",+ "type": "input",+ "description": "Reclocker bypass control with internal pulldown; H = bypassed, L = normal operation."+ },+ {+ "number": "16",+ "name": "MUTE",+ "type": "input",+ "description": "Output mute control with internal pullup; H = normal, L = SDO0 and SDO1 muted."+ },+ {+ "number": "17",+ "name": "SPI_EN",+ "type": "input",+ "description": "SPI register access enable with internal pulldown; H = SPI mode, L = pin mode."+ },+ {+ "number": "18",+ "name": "XTAL_IN",+ "type": "input",+ "description": "External 27 MHz crystal or clock input for optional reference; connect to GND for referenceless mode."+ },+ {+ "number": "19",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "20",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "21",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "22",+ "name": "XTAL_OUT",+ "type": "output",+ "description": "External 27 MHz crystal or clock output for cascading to additional devices."+ },+ {+ "number": "23",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "24",+ "name": "LOCK_DETECT",+ "type": "output",+ "description": "PLL lock detect status output, active high; H = locked, L = unlocked."+ },+ {+ "number": "25",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "26",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "27",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "28",+ "name": "SDO1",+ "type": "output",+ "description": "Positive output of differential serial data output 1 or recovered clock (LVDS)."+ },+ {+ "number": "29",+ "name": "SDO1",+ "type": "output",+ "description": "Negative output of differential serial data output 1 or recovered clock (LVDS)."+ },+ {+ "number": "30",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 2.5V nominal."+ },+ {+ "number": "31",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 2.5V nominal."+ },+ {+ "number": "32",+ "name": "SDO0",+ "type": "output",+ "description": "Positive output of differential serial data output 0 (LVDS)."+ },+ {+ "number": "33",+ "name": "SDO0",+ "type": "output",+ "description": "Negative output of differential serial data output 0 (LVDS)."+ },+ {+ "number": "34",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 2.5V nominal."+ },+ {+ "number": "35",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 2.5V nominal."+ },+ {+ "number": "36",+ "name": "SD/HD",+ "type": "output",+ "description": "Data rate range indication output; H = SD (270 Mbps), L = HD/3G or PLL unlocked."+ },+ {+ "number": "37",+ "name": "SCO_EN",+ "type": "input",+ "description": "Serial clock output enable for SDO1 with internal pulldown; H = SDO1 is clock, L = SDO1 is data."+ },+ {+ "number": "38",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "39",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "40",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "41",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "42",+ "name": "VEE",+ "type": "power_in",+ "description": "Ground connection, negative power supply."+ },+ {+ "number": "43",+ "name": "LF1",+ "type": "passive",+ "description": "Loop filter connection; connect 56 nF capacitor between LF1 and LF2 for PLL stabilization."+ },+ {+ "number": "44",+ "name": "LF2",+ "type": "passive",+ "description": "Loop filter connection; connect 56 nF capacitor between LF1 and LF2 for PLL stabilization."+ },+ {+ "number": "45",+ "name": "RATE0",+ "type": "input",+ "description": "Data rate select input with internal pulldown; selects data rate mode in conjunction with RATE1."+ },+ {+ "number": "46",+ "name": "RATE1",+ "type": "input",+ "description": "Data rate select input with internal pulldown; selects data rate mode in conjunction with RATE0."+ },+ {+ "number": "47",+ "name": "SEL0",+ "type": "input",+ "description": "Input channel select with internal pulldown; selects serial input channel in conjunction with SEL1."+ },+ {+ "number": "48",+ "name": "SEL1",+ "type": "input",+ "description": "Input channel select with internal pulldown; selects serial input channel in conjunction with SEL0."+ },+ {+ "number": "49",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin diagram on page 3 shows pins 45-48 labeled as RATE1, RATE0, SEL1, SEL0 (bottom to top), but Tabl; Device operates in either pin mode (SPI_EN = GND, Table 1) or SPI mode (SPI_EN = VCC, Table 2) with ",+ "exposed pad 49 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 43,+ "cost_usd": 0.8682,+ "at": "2026-09-21T19:25:44"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lmh0376",+ "pages": 43,+ "sha256": "dd5932d29bb5ff31",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 49,+ "described": 49,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}