main
Ray
Publish 0.1.0
285e289
LME49726MYX
Texas Instruments · Audio Amplifiers · HVSSOP-8-EP
LME49726MYX from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUTA | output | Output of amplifier A, which swings rail-to-rail and drives 2kΩ loads to within 4mV of either supply rail. |
| 2 | INVERTING INPUT A | input | Inverting input of amplifier A, used with the feedback network in the inverting and buffer configurations shown on pages 9-10. |
| 3 | NON-INVERTING INPUT A | input | Non-inverting input of amplifier A, which the datasheet notes must be kept within the common-mode input voltage range VSS+0.1V to VDD-1.6V. |
| 4 | VSS | power_in | Negative power supply (VEE/VSS) pin; the device operates from 2.5V to 5.5V single supply or ±1.25V to ±2.75V dual supply. |
| 5 | NON-INVERTING INPUT B | input | Non-inverting input of amplifier B, which the datasheet notes must be kept within the common-mode input voltage range VSS+0.1V to VDD-1.6V. |
| 6 | INVERTING INPUT B | input | Inverting input of amplifier B, used with the feedback network in the inverting and buffer configurations shown on pages 9-10. |
| 7 | OUTPUTB | output | Output of amplifier B, which swings rail-to-rail and drives 2kΩ loads to within 4mV of either supply rail. |
| 8 | VDD | power_in | Positive power supply pin; the supply voltage range is 2.5V to 5.5V and the absolute maximum VS is 6V. |
| 9 | EP | passive | Exposed thermal pad on the DGN0008A PowerPAD package, shown on the land pattern for thermal relief; the datasheet gives no electrical function. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain Bandwidth Product | GBWP | 5 | 6.25 | MHz | 4 | ||
| Slew Rate | SR | 2.5 | 3.7 | V/μs | AV = +1, RL = 10kΩ | 4 | |
| Equivalent Input Noise Voltage | eN | 0.7 | 1.25 | μVRMS | fBW = 20Hz to 20kHz (A-weighted) | 4 | |
| Input Offset Voltage | VOS | 0.5 | 2.25 | mV | VIN = VDD/2, VO = VDD/2, AV = 1 | 4 | |
| Power Supply Rejection Ratio | PSRR | 85 | 104 | dB | 2.5 to 5.5V, VCM = 0, VDD/2 | 4 | |
| Common Mode Rejection Ratio | CMRR | 80 | 95 | dB | 0.1V < VDD, 1.6V | 4 | |
| Open-Loop Voltage Gain | AVOL | 100 | 120 | dB | VOUT = VDD/2 | 4 | |
| Quiescent Current per Amplifier | IS | 0.7 | 1.1 | mA | IOUT = 0mA, VDD = 5V | 4 | |
| Quiescent Current per Amplifier | IS | 0.64 | 1 | mA | IOUT = 0mA, VDD = 2.5V | 4 | |
| Supply Voltage Range | 2.5 | 5.5 | V | 3 | |||
| Temperature Range | TA | -40 | 125 | °C | TMIN ≤ TA ≤ TMAX | 3 | |
| Power Supply Voltage | VS | 6 | V | VS = VSS-VDD | 3 | ||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Input Voltage | -0.7 | 0.7 | V | Printed as (VSS), 0.7V to (VDD) + 0.7V; offsets relative to the supply pins | 3 | ||
| ESD Rating (Human Body Model) | 2000 | V | Human body model, JESD22-A114C | 3 | |||
| ESD Rating (Machine Model) | 200 | V | Machine model, JESD22-A115-A | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 72 | °C/W | DGN0008A package | 3 |
CAD (KiCad official)
- Symbol:
LME49726MYX - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lme49726myx-etched.step/lme49726myx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lme49726myx.step/lme49726myx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
341994607fd1d21f, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LME49726MYX
**Texas Instruments** · Audio Amplifiers · HVSSOP-8-EP
LME49726MYX from Texas Instruments, in a HVSSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUTA | output | Output of amplifier A, which swings rail-to-rail and drives 2kΩ loads to within 4mV of either supply rail. |
| 2 | INVERTING INPUT A | input | Inverting input of amplifier A, used with the feedback network in the inverting and buffer configurations shown on pages 9-10. |
| 3 | NON-INVERTING INPUT A | input | Non-inverting input of amplifier A, which the datasheet notes must be kept within the common-mode input voltage range VSS+0.1V to VDD-1.6V. |
| 4 | VSS | power_in | Negative power supply (VEE/VSS) pin; the device operates from 2.5V to 5.5V single supply or ±1.25V to ±2.75V dual supply. |
| 5 | NON-INVERTING INPUT B | input | Non-inverting input of amplifier B, which the datasheet notes must be kept within the common-mode input voltage range VSS+0.1V to VDD-1.6V. |
| 6 | INVERTING INPUT B | input | Inverting input of amplifier B, used with the feedback network in the inverting and buffer configurations shown on pages 9-10. |
| 7 | OUTPUTB | output | Output of amplifier B, which swings rail-to-rail and drives 2kΩ loads to within 4mV of either supply rail. |
| 8 | VDD | power_in | Positive power supply pin; the supply voltage range is 2.5V to 5.5V and the absolute maximum VS is 6V. |
| 9 | EP | passive | Exposed thermal pad on the DGN0008A PowerPAD package, shown on the land pattern for thermal relief; the datasheet gives no electrical function. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain Bandwidth Product | GBWP | 5 | 6.25 | | MHz | | 4 |
| Slew Rate | SR | 2.5 | 3.7 | | V/μs | AV = +1, RL = 10kΩ | 4 |
| Equivalent Input Noise Voltage | eN | | 0.7 | 1.25 | μVRMS | fBW = 20Hz to 20kHz (A-weighted) | 4 |
| Input Offset Voltage | VOS | | 0.5 | 2.25 | mV | VIN = VDD/2, VO = VDD/2, AV = 1 | 4 |
| Power Supply Rejection Ratio | PSRR | 85 | 104 | | dB | 2.5 to 5.5V, VCM = 0, VDD/2 | 4 |
| Common Mode Rejection Ratio | CMRR | 80 | 95 | | dB | 0.1V < VDD, 1.6V | 4 |
| Open-Loop Voltage Gain | AVOL | 100 | 120 | | dB | VOUT = VDD/2 | 4 |
| Quiescent Current per Amplifier | IS | | 0.7 | 1.1 | mA | IOUT = 0mA, VDD = 5V | 4 |
| Quiescent Current per Amplifier | IS | | 0.64 | 1 | mA | IOUT = 0mA, VDD = 2.5V | 4 |
| Supply Voltage Range | | 2.5 | | 5.5 | V | | 3 |
| Temperature Range | TA | -40 | | 125 | °C | TMIN ≤ TA ≤ TMAX | 3 |
| Power Supply Voltage | VS | | | 6 | V | VS = VSS-VDD | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Input Voltage | | -0.7 | | 0.7 | V | Printed as (VSS), 0.7V to (VDD) + 0.7V; offsets relative to the supply pins | 3 |
| ESD Rating (Human Body Model) | | | | 2000 | V | Human body model, JESD22-A114C | 3 |
| ESD Rating (Machine Model) | | | | 200 | V | Machine model, JESD22-A115-A | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| Thermal Resistance Junction-to-Ambient | θJA | | 72 | | °C/W | DGN0008A package | 3 |
## CAD (KiCad official)
- Symbol: `LME49726MYX`
- Footprint: `Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm`
- 3D model: HVSSOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `lme49726myx-etched.step` / `lme49726myx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lme49726myx.step` / `lme49726myx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lme49726.pdf) (28 pp, sha256 `341994607fd1d21f`, retrieved 2026-11-06, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lme49726myx-datasheet.pdf)