main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lmc7660imx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lmc7660imx: viewers · Ray
lmc7660imx-etched.fit.json lmc7660imx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmc7660imx-etched.glb lmc7660imx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmc7660imx-etched.step lmc7660imx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lmc7660imx.glb Publish 0.1.0 · Ray
lmc7660imx.kicad_mod Publish 0.1.0 · Ray
lmc7660imx.kicad_sym Publish 0.1.0 · Ray
lmc7660imx.lbr Publish 0.1.0 · Ray
lmc7660imx.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lmc7660imx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lmc7660imx: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LMC7660IMX

Texas Instruments · DC-DC Converters · SOIC-8

LMC7660IMX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N/C unconnected No internal connection. Leave floating or tie to a convenient net; carries no signal.
2 Cap+ passive Positive terminal of the flying (pump) capacitor Cp. Internally switched between V+ and Vout by the S1/S2 MOS switches to shuttle charge from the input to the output reservoir. Typically 10 uF electrolytic to pin 4 (Cap-).
3 Gnd power_in Device ground reference (0 V). Return for the input supply, oscillator, and internal logic; also the reference for the negative Vout.
4 Cap- passive Negative terminal of the flying (pump) capacitor Cp. Internally switched between Gnd and Vout by the S3/S4 MOS switches during the charge-pump cycle. Typically 10 uF electrolytic to pin 2 (Cap+).
5 Vout power_out Negative charge-pump output, nominally -V+ (e.g. -5V from a +5V input) into a light load. Bypass to Gnd with a 10 uF reservoir capacitor Cr. Typical output source resistance 55 Ω at IL = 20 mA (100 Ω max).
6 LV input Low-Voltage operation control. Tie to Gnd when operating below V+ ≈ 3.5 V to bypass the internal regulator and improve low-voltage performance; leave open (floating) for V+ ≥ 3.5 V. Input current into pin 6 is limited to 20 uA max.
7 Osc bidirectional Oscillator node. Free-running internal oscillator ~10 kHz at 25 °C. May be pulled down with an external Cosc to lower the switching frequency, or over-driven by an external clock (sink/source current 3 uA typical).
8 V+ power_in Positive supply input, +1.5 V to +10 V operating range (10.5 V absolute max). Powers the internal oscillator, level translator, and charge-pump MOS switches. Supply current 120 uA typical (200 uA max) with no load.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LMC7660IMX
  • LMC7660IMXIN

CAD (KiCad official)

  • Symbol: LMC7660IMX
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lmc7660imx-etched.step / lmc7660imx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmc7660imx.step / lmc7660imx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (19 pp, sha256 fd99625337f03a10, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF