# LMC6041IMX

**Texas Instruments** · Operational Amplifier · SOIC-8

LMC6041IMX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to a static potential. |
| 2 | -IN | input | Inverting input of the op-amp. High-impedance CMOS input with typical bias current of 2 fA. Input common-mode range includes V- (ground in single-supply operation). |
| 3 | +IN | input | Non-inverting input of the op-amp. High-impedance CMOS input with typical bias current of 2 fA. Input common-mode range extends from V- to (V+ - 1.9 V) typ. |
| 4 | V- | power_in | Negative supply rail. Tie to ground for single-supply operation, or to the negative rail for split-supply operation. Total supply (V+ - V-) must be between 4.5 V and 15.5 V (16 V absolute max). |
| 5 | NC | unconnected | No internal connection. Leave floating or tie to a static potential. |
| 6 | OUTPUT | output | Op-amp output with rail-to-rail swing. Short-circuit sourcing current 22 mA typ (V+=5V) / 40 mA typ (V+=15V); sinking current 21/39 mA typ. Absolute max current at output pin is ±18 mA continuous. |
| 7 | V+ | power_in | Positive supply rail. 4.5 V to 15.5 V operating range (16 V absolute max between V+ and V-). Bypass close to the pin with a decoupling capacitor. |
| 8 | NC | unconnected | No internal connection. Leave floating or tie to a static potential. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |

## Ordering variants

Same part, different packaging or reel option.

- `LMC6041IMX`
- `LMC6041IMXIN`

## CAD (KiCad official)

- Symbol: `LMC6041IMX`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lmc6041imx-etched.step` / `lmc6041imx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmc6041imx.step` / `lmc6041imx.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lmc6041imx.pdf) (23 pp, sha256 `7c4f537f4e42da06`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/lmc6041imx-datasheet.pdf)