main
Ray lmc555m: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) fbbb480
{
  "slug": "lmc555m",
  "version": "0.1.0",
  "type": "component",
  "description": "HGSEMI Timers / Clock Oscillators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rtc",
    "lmc555m"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lmc555m.kicad_sym",
    "lmc555m.kicad_mod",
    "lmc555m.glb",
    "lmc555m.step",
    "lmc555m.lbr",
    "docs/hero.png",
    "docs/lmc555m-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lmc555m-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "LMC555M",
    "manufacturer": "HGSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Timers / Clock Oscillators",
    "parts": {
      "symbol": "lmc555m.kicad_sym",
      "footprint": "lmc555m.kicad_mod",
      "model_3d": "lmc555m-etched.glb",
      "model_3d_plain": "lmc555m.glb",
      "model_3d_step": "lmc555m-etched.step",
      "model_3d_step_plain": "lmc555m.step",
      "lbr": "lmc555m.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0V). Connect to the negative supply rail."
      },
      {
        "number": "2",
        "name": "TRIGGER",
        "type": "input",
        "description": "Trigger input. When the voltage at this pin falls below 1/3 VCC, the internal flip-flop is set and the OUTPUT goes HIGH. High input impedance CMOS input."
      },
      {
        "number": "3",
        "name": "OUTPUT",
        "type": "output",
        "description": "Push-pull CMOS output. Can source and sink current to drive TTL/CMOS loads. Output swings between GND and VCC."
      },
      {
        "number": "4",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input. When held below approximately 0.7V, forces the OUTPUT LOW and DISCHARGE ON regardless of other inputs. Tie to VCC when not used."
      },
      {
        "number": "5",
        "name": "CONTROL",
        "type": "input",
        "description": "Control voltage input. Provides direct access to the internal 2/3 VCC threshold reference divider. Typically bypassed to GND with a 0.01µF capacitor when not used."
      },
      {
        "number": "6",
        "name": "THRESHOLD",
        "type": "input",
        "description": "Threshold input. When the voltage at this pin rises above 2/3 VCC (or the CONTROL voltage), the internal flip-flop is reset and the OUTPUT goes LOW. High input impedance CMOS input."
      },
      {
        "number": "7",
        "name": "DISCHARGE",
        "type": "output",
        "description": "Open-drain discharge output. Connected to GND internally through an N-channel MOSFET when the internal flip-flop is reset (OUTPUT LOW). Typically used to discharge the timing capacitor in astable/monostable configurations."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage input. Operating range 1.5V to 15V. Bypass with a 0.1µF ceramic capacitor to GND near the pin."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:05:15Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "lmc555m.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lmc555m-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "586b6a72d5d665b348d8268c6725faf732bff321599ed198efe5899a9248c556",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}