component
LMBR160FT1G
Public Made by Adomby adom
LRC Schottky Barrier Diodes (SBD), SOD-123FL. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
main
LMBR160FT1G
LRC · Schottky Barrier Diodes (SBD) · SOD-123FL
LMBR160FT1G from LRC, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOD-123FL |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum repetitive peak reverse voltage | VR | 60 | V | IR=500µA | 1 | ||
| Maximum instantaneous forward voltage | VF | 0.7 | V | IF = 1.0 A, TJ = 25°C | 1 | ||
| Maximum DC reverse current at rated DC blocking voltage | IR | 0.5 | mA | TA = 25°C | 1 | ||
| Maximum DC reverse current at rated DC blocking voltage | IR | 10 | mA | Tj = 125°C | 1 | ||
| Maximum RMS voltage | VRMS | 42 | V | 1 | |||
| Maximum DC blocking voltage | VDC | 60 | V | 1 | |||
| Maximum repetitive peak reverse voltage | VRRM | 60 | V | 1 | |||
| Maximum average forward rectified current | IF(AV) | 1 | A | TA = 75°C | 1 | ||
| Peak forward surge current | IFSM | 30 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | 1 | ||
| Operating junction temperature range | TJ | -55 | 150 | ℃ | 1 | ||
| Storage temperature range | TSTG | -65 | 175 | ℃ | 1 | ||
| Power dissipation | PD | 400 | mW | 1 | |||
| Typical thermal resistance, junction to ambient | RθJA | 170 | ℃/W | Note 1: 8.0mm² (.013mm thick) land areas | 1 | ||
| Typical thermal resistance, junction to lead | RθJL | 40 | ℃/W | Note 1: 8.0mm² (.013mm thick) land areas | 1 |
CAD (KiCad official)
- Symbol:
LMBR160FT1G - Footprint:
Diode_SMD:D_SOD-123F - 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files:
lmbr160ft1g-etched.step/lmbr160ft1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmbr160ft1g.step/lmbr160ft1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (3 pp, sha256
036895f22d1de58e, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarycathode-band convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LMBR160FT1G
**LRC** · Schottky Barrier Diodes (SBD) · SOD-123FL
LMBR160FT1G from LRC, in a SOD-123FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOD-123FL |
| Category | Diodes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum repetitive peak reverse voltage | VR | 60 | | | V | IR=500µA | 1 |
| Maximum instantaneous forward voltage | VF | | | 0.7 | V | IF = 1.0 A, TJ = 25°C | 1 |
| Maximum DC reverse current at rated DC blocking voltage | IR | | | 0.5 | mA | TA = 25°C | 1 |
| Maximum DC reverse current at rated DC blocking voltage | IR | | | 10 | mA | Tj = 125°C | 1 |
| Maximum RMS voltage | VRMS | | | 42 | V | | 1 |
| Maximum DC blocking voltage | VDC | | | 60 | V | | 1 |
| Maximum repetitive peak reverse voltage | VRRM | | | 60 | V | | 1 |
| Maximum average forward rectified current | IF(AV) | | | 1 | A | TA = 75°C | 1 |
| Peak forward surge current | IFSM | | | 30 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | 1 |
| Operating junction temperature range | TJ | -55 | | 150 | ℃ | | 1 |
| Storage temperature range | TSTG | -65 | | 175 | ℃ | | 1 |
| Power dissipation | PD | | | 400 | mW | | 1 |
| Typical thermal resistance, junction to ambient | RθJA | | 170 | | ℃/W | Note 1: 8.0mm² (.013mm thick) land areas | 1 |
| Typical thermal resistance, junction to lead | RθJL | | 40 | | ℃/W | Note 1: 8.0mm² (.013mm thick) land areas | 1 |
## CAD (KiCad official)
- Symbol: `LMBR160FT1G`
- Footprint: `Diode_SMD:D_SOD-123F`
- 3D model: SOD-123FL (KiCad packages3D, STEP)
- 3D model files: `lmbr160ft1g-etched.step` / `lmbr160ft1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lmbr160ft1g.step` / `lmbr160ft1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LRC datasheet](docs/lmbr160ft1g-datasheet.pdf) (3 pp, sha256 `036895f22d1de58e`, retrieved 2026-10-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `cathode-band convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lmbr160ft1g-datasheet.pdf)