main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm95235dimm: viewers · Ray
lm95235dimm-etched.glb Publish 0.1.0 · Ray
lm95235dimm-etched.step lm95235dimm: factory component page (tier=mfr) · Ray
lm95235dimm-hero.glb lm95235dimm: hero GLB from the etched model (keeps the MPN mark) · Ray
lm95235dimm-hero.overlay.json Publish 0.1.0 · Ray
lm95235dimm.glb Publish 0.1.0 · Ray
lm95235dimm.kicad_mod Publish 0.1.0 · Ray
lm95235dimm.kicad_sym Publish 0.1.0 · Ray
lm95235dimm.lbr Publish 0.1.0 · Ray
lm95235dimm.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LM95235DIMM

Texas Instruments · Temperature Sensors · VSSOP-8-0.65mm

LM95235DIMM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Device power supply that requires a 10 µF bypass capacitor in parallel with 0.1 µF and 100 pF, with the 100 pF placed closest to the device pin.
2 D+ passive Positive input from the thermal diode.
3 D- passive Negative input from the thermal diode; forward biasing its parasitic diode by more than 50 mV may corrupt temperature measurements.
4 T_CRIT output Critical temperature output that is an active-low open-drain output requiring a pull-up resistor.
5 GND power_in Device ground.
6 OS/A0 bidirectional Over-temperature shutdown comparator output or SMBus slave address input that is active low and open drain when programmed as OS; it can be tied to VDD, GND, or a resistor divider midpoint to select one of three addresses.
7 SMBDAT bidirectional SMBus interface data pin that is an open-drain output requiring a pull-up resistor.
8 SMBCLK input SMBus interface clock pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Temperature Accuracy, Local Diode -2 1 2 °C TA = 25°C to +100°C 5
Temperature Accuracy, Remote Diode, 65nm Intel Processor -0.75 0.5 0.75 °C TA = +25°C to +85°C; TD = +60°C to +100°C 5
Temperature Accuracy, Remote Diode, MMBT3904 or 65nm Intel Processor -1 0.5 1 °C TA = +25°C to TMAX; TD = +60°C to +100°C 5
Temperature Accuracy, Remote Diode, MMBT3904 or 65nm Intel Processor -1.5 0.75 1.5 °C TA = +25°C to TMAX; TD = +40°C to +120°C 5
Conversion Time, Fastest Setting 63 72 ms Fastest Local and Remote Channels Setting 5
Quiescent Current 350 650 µA SMBus Inactive, 1 Hz conversion rate 5
External Diode Current, High-level Source 172 225 µA High-level Source 5
Power-On Reset Voltage 2.8 V 5
Power-On Reset Voltage 1.6 V 5
Logical 1 Input Voltage, SMBDAT and SMBCLK VIN(1) 2.1 V 6
Logical 0 Input Voltage, SMBDAT and SMBCLK VIN(0) 0.8 V 6
Logical 1 Input Current, SMBDAT and SMBCLK IIN(1) -0.005 -10 µA VIN = VDD 6
Logical 0 Input Current, SMBDAT and SMBCLK IIN(0) 0.005 10 µA VIN = 0 V 6
Input High Voltage, A0 VIH 0.9 × VDD V 6
Input Middle Voltage, A0 VIM 0.57 × VDD V 6
Input Middle Voltage, A0 VIM 0.43 × VDD V 6
Input Low Voltage, A0 VIL 0.1 × VDD V 6
Logical 1 Input Current, A0 IIN(1) -0.005 -10 µA VIN = VDD 6
Logical 0 Input Current, A0 IIN(0) 0.005 10 µA VIN = 0 V 6
High Level Output Leakage Current, SMBDAT, T_CRIT, OS IOH 10 µA VOUT = VDD 6
Low Level Output Voltage, T_CRIT, OS VOL 0.4 V IOL = 6 mA 6
SMBDAT Low Level Output Voltage VOL(SMBDAT) 0.6 V IOL = 6 mA 6
SMBus Clock Frequency fSMB 10 100 kHz 6
SMBus Clock Low Time tLOW 4.7 µs 6
SMBus Clock Low Time tLOW 25 ms 6
SMBus Clock High Time tHIGH 4 µs 6
SMBus Rise Time tR,SMB 1 µs 6
SMBus Fall Time tF,SMB 0.3 µs 6
Output Fall Time tOF 250 ns CL = 400 pF, IO = 3 mA 7
Reset of Serial Interface Timeout tTIMEOUT 25 35 ms SMBDAT and SMBCLK Time Low 7
Data In Setup Time to SMBCLK High tSU;DAT 250 ns 7
Data Out Stable after SMBCLK Low tHD;DAT 300 1075 ns 7
Start Condition Hold Time tHD;STA 100 ns SMBDAT Low to SMBCLK Low 7
Stop Condition Setup Time tSU;STO 100 ns SMBCLK High to SMBDAT Low 7
SMBus Repeated Start-Condition Setup Time tSU;STA 0.6 µs SMBCLK High to SMBDAT Low 7
SMBus Free Time Between Stop and Start Conditions tBUF 1.3 µs 7
Supply Voltage (VDD) VDD 3 3.6 V 4
Operating Temperature Range, LM95235DIMM TA -40 90 °C LM95235DIMM 4
Supply Voltage, VDD VDD -0.3 6 V 4
Voltage at SMBDAT, SMBCLK, T_CRIT, OS/A0 Pins -0.5 6 V 4
Input Current at D- Pin -1 1 mA 4
Input Current at All Other Pins -5 5 mA 4
Output Sink Current, SMBDAT, T_CRIT, OS Pins 10 mA 4
Package Input Current 30 mA 4
ESD Human Body Model 2500 V 4
ESD Machine Model 250 V 4
ESD Charged Device Model 1000 V 4
Junction Temperature TJ 125 °C 4
Storage Temperature TSTG -65 150 °C 4
Thermal Resistance, Junction-to-Ambient, VSSOP-8 θJA 210 °C/W PCB with 1 oz. foil, no airflow 4

CAD (KiCad official)

  • Symbol: LM95235DIMM
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lm95235dimm-etched.step / lm95235dimm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm95235dimm.step / lm95235dimm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 9f63e245495d5a18, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF