LM9061M

{
  "slug": "lm9061m",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Gate Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "lm9061m",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm9061m.kicad_sym",
    "lm9061m.kicad_mod",
    "lm9061m.glb",
    "lm9061m.step",
    "lm9061m.lbr",
    "docs/hero.png",
    "docs/lm9061m-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm9061m-hero.glb",
    "lm9061m-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM9061M",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm9061",
    "parts": {
      "symbol": "lm9061m.kicad_sym",
      "footprint": "lm9061m.kicad_mod",
      "model_3d": "lm9061m-hero.glb",
      "model_3d_plain": "lm9061m.glb",
      "model_3d_step": "lm9061m-etched.step",
      "model_3d_step_plain": "lm9061m.step",
      "lbr": "lm9061m.lbr"
    },
    "distributor_links": {
      "lcsc": "C1549304",
      "digikey": "LM9061M-ND",
      "mouser": "926-LM9061M"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T22:03:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LM9061M-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "926-LM9061M",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Sense",
        "type": "input",
        "description": "The inverting input to the protection comparator, connected to the external MOSFET source pin and the load."
      },
      {
        "number": "2",
        "name": "Threshold",
        "type": "input",
        "description": "The noninverting input to the protection comparator and a current sink for the threshold resistor, which sets the allowed voltage drop across the external MOSFET."
      },
      {
        "number": "3",
        "name": "Ground",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "4",
        "name": "Output",
        "type": "output",
        "description": "The gate drive connection that charges and discharges the MOSFET gate."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "The voltage supply pin, with an operating range of 7 V minimum to 26 V maximum."
      },
      {
        "number": "6",
        "name": "IREF",
        "type": "output",
        "description": "A resistor on this pin to ground sets the current through the threshold resistor, which sets the allowed voltage drop across the external MOSFET."
      },
      {
        "number": "7",
        "name": "On/Off",
        "type": "input",
        "description": "The control pin, where a low voltage VIN(0) disables device operation and a high voltage VIN(1) enables it."
      },
      {
        "number": "8",
        "name": "Delay",
        "type": "output",
        "description": "A capacitor on this pin to ground provides a delay between the protection comparator detecting excessive VGS across the MOSFET and the gate drive being latched OFF."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The LM9061M/NOPB is the catalog part in the D (SOIC-8) package, and the datasheet pinout on page 3 a; Pin types for IREF and Delay are listed as O (output) in the datasheet, but both are really pins tha; Pin 2 (Threshold) is both a comparator input and a current sink for the threshold resistor. It was t",
          "1/8 pins cited to the wrong page (name found elsewhere): ['3:Ground@p3']"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0477,
        "at": "2026-10-07T22:03:12"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm9061",
        "pages": 35,
        "sha256": "b5f962ad5b28a0a6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm9061m.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm9061m-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9240b116fb3c2e8488e9fd669534400f386f7e310dbef1c8cdf466dbde2a5e70",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}