main
Ray
Publish 0.1.0
9d8cb90
LM83CIMQAX
Texas Instruments · Temperature Sensors · SSOP-16-150mil
LM83CIMQAX from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1+ | passive | Diode current source to the anode of a remote diode junction; left floating when not used. |
| 2 | VCC | power_in | Positive supply voltage input, specified at 3.0 V to 3.6 V DC. |
| 3 | D2+ | passive | Diode current source to the anode of a remote diode junction; left floating when not used. |
| 4 | D- | passive | Diode return current sink to all diode cathodes via a star connection; must float when not used. |
| 5 | D3+ | passive | Diode current source to the anode of a remote diode junction; left floating when not used. |
| 6 | ADD1 | input | User-set SMBus address input, tied to ground (low), VCC (high), or left open (tri-level). |
| 7 | GND | power_in | Power supply ground. |
| 8 | GND | power_in | Power supply ground. |
| 9 | NC | unconnected | Manufacturing test pin; left floating. |
| 10 | ADD0 | input | User-set SMBus address input, tied to ground (low), VCC (high), or left open (tri-level). |
| 11 | INT | output | Open-drain interrupt output requiring a pull-up resistor; signals a controller interrupt or alert line. |
| 12 | SMBData | bidirectional | Open-drain SMBus (I2C) serial bidirectional data line requiring a pull-up resistor. |
| 13 | NC | unconnected | Manufacturing test pin; left floating. |
| 14 | SMBCLK | input | SMBus (I2C) clock input from the controller, requiring a pull-up resistor. |
| 15 | NC | unconnected | Manufacturing test pin; left floating. |
| 16 | T_CRIT_A | output | Open-drain critical temperature alarm output requiring a pull-up resistor; used for controller interrupt or system shutdown. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 3 | 3.6 | V | 5 | ||
| Specified Temperature Range LM83 | TMIN to TMAX | -40 | 125 | ˚C | LM83 TMIN to TMAX | 5 | |
| Supply Voltage | VCC | -0.3 | 6 | V | 5 | ||
| Voltage at Any Pin | -0.3 | V | maximum is VCC + 0.3 V | 5 | |||
| D− Input Current | -1 | 1 | mA | 5 | |||
| Input Current at All Other Pins | 5 | mA | Note 2 | 5 | |||
| Package Input Current | 20 | mA | Note 2 | 5 | |||
| SMBData, T_CRIT_A, INT Output Sink Current | 10 | mA | 5 | ||||
| SMBCLK, SMBData, T_CRIT_A, INT Output Voltage | 6 | V | 5 | ||||
| Storage Temperature | TSTORE | -65 | 150 | ˚C | 5 | ||
| Soldering Lead Temperature Vapor Phase | 215 | ˚C | QSOP package, vapor phase 60 seconds | 5 | |||
| Soldering Lead Temperature Infrared | 220 | ˚C | QSOP package, infrared 15 seconds | 5 | |||
| ESD Human Body Model | 2000 | V | Note 4: 100 pF through 1.5 kΩ | 5 | |||
| ESD Machine Model | 200 | V | Note 4: 200 pF direct into each pin | 5 | |||
| Temperature Error Using Local Diode | -3 | 1 | 3 | ˚C | TA = 0 ˚C to +85˚C, VCC=+3.3V | 5 | |
| Temperature Error Using Local Diode | -4 | 4 | ˚C | TA = −40 ˚C to +125˚C, VCC=+3.3V | 5 | ||
| Temperature Error Using Remote Diode | -3 | 3 | ˚C | TA = +60 ˚C to +100˚C, VCC=+3.3V | 5 | ||
| Temperature Error Using Remote Diode | -4 | 4 | ˚C | TA = 0 ˚C to +125˚C, VCC=+3.3V | 5 | ||
| Conversion Time of All Temperatures | 460 | 600 | ms | Note 10 | 5 | ||
| Quiescent Current | 0.5 | 0.8 | mA | SMBus (I2C) Inactive | 5 | ||
| Diode Source Current High Level | 60 | 125 | µA | (D+ − D−)=+ 0.65V; high level | 5 | ||
| Diode Source Current Low Level | 5 | 15 | µA | (D+ − D−)=+ 0.65V; low level | 5 | ||
| T_CRIT_A and INT Output Saturation Voltage | 0.4 | V | IOUT = 3.0 mA | 5 | |||
| Power-On Reset Threshold | 2.3 | V | On VCC input, falling edge | 5 | |||
| Power-On Reset Threshold | 1.8 | V | On VCC input, falling edge | 5 | |||
| Logical 1 Input Voltage SMBData, SMBCLK | VIN(1) | 2.1 | V | 6 | |||
| Logical 0 Input Voltage SMBData, SMBCLK | VIN(0) | 0.8 | V | 6 | |||
| Logical 1 Input Current SMBData, SMBCLK | IIN(1) | 0.005 | 1.5 | µA | VIN =VCC | 6 | |
| Logical 0 Input Current SMBData, SMBCLK | IIN(0) | -0.005 | 1.5 | µA | VIN = 0 V | 6 | |
| Logical 1 Input Voltage ADD0, ADD1 | VIN(1) | 1.5 | V | 6 | |||
| Logical 0 Input Voltage ADD0, ADD1 | VIN(0) | 0.6 | V | 6 | |||
| Logical 1 Input Current ADD0, ADD1 | IIN(1) | 2 | µA | VIN =VCC | 6 | ||
| Logical 0 Input Current ADD0, ADD1 | IIN(0) | -2 | µA | VIN =0V | 6 | ||
| High Level Output Current | IOH | 100 | µA | VOH =VCC | 6 | ||
| SMBus Low Level Output Voltage | VOL | 0.4 | V | IOL = 3 mA | 6 | ||
| SMBus Low Level Output Voltage | VOL | 0.6 | V | IOL = 6 mA | 6 | ||
| SMBus Clock Frequency | fSMB | 10 | 100 | kHz | 7 | ||
| SMBus Clock Low Time | tLOW | 1.3 | µs | 10 % to 10 % | 7 | ||
| SMBus Clock Low Time | tLOW | 25 | ms | 10 % to 10 % | 7 | ||
| Cumulative Clock Low Extend Time | tLOWMEXT | 10 | ms | 7 | |||
| SMBus Clock High Time | tHIGH | 0.6 | µs | 90 % to 90% | 7 | ||
| SMBus Rise Time | tR,SMB | 1 | µs | 10% to 90% | 7 | ||
| SMBus Fall Time | tF,SMB | 0.3 | ns | 90% to 10% | 7 | ||
| Output Fall Time | tOF | 250 | ns | CL = 400 pF, IO = 3 mA | 7 | ||
| SMBData and SMBCLK Time Low for Reset of Serial Interface | tTIMEOUT | 25 | 40 | ms | Note 12 | 7 | |
| SMBCLK Clock Period | t1 | 10 | µs | 7 | |||
| Data In Setup Time to SMBCLK High | t2, tSU;DAT | 100 | ns | 7 | |||
| Data Out Stable after SMBCLK Low | t3, tHD;DAT | 300 | ns | maximum listed as TBD | 7 | ||
| SMBData Low Setup Time to SMBCLK Low | t4, tHD;STA | 100 | ns | 7 | |||
| SMBData High Delay Time after SMBCLK High | t5, tSU;STO | 100 | ns | Stop condition setup | 7 | ||
| SMBus Start-Condition Setup Time | t6, tSU;STA | 0.6 | µs | 7 | |||
| SMBus Free Time | tBUF | 1.3 | µs | 7 | |||
| D− Source Voltage | 0.7 | V | 5 | ||||
| SMBus Input Hysteresis | VIN(HYST) | 300 | mV | SMBData and SMBCLK digital input | 6 | ||
| Input Capacitance | CIN | 20 | pF | 6 | |||
| Local and Remote T_CRIT and HIGH Default Temperature | 127 | ˚C | Note 11, default values set at power up | 5 |
CAD (KiCad official)
- Symbol:
LM83CIMQAX - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
lm83cimqax-etched.step/lm83cimqax-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm83cimqax.step/lm83cimqax.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
ed0018c7adb9d575, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM83CIMQAX
**Texas Instruments** · Temperature Sensors · SSOP-16-150mil
LM83CIMQAX from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1+ | passive | Diode current source to the anode of a remote diode junction; left floating when not used. |
| 2 | VCC | power_in | Positive supply voltage input, specified at 3.0 V to 3.6 V DC. |
| 3 | D2+ | passive | Diode current source to the anode of a remote diode junction; left floating when not used. |
| 4 | D- | passive | Diode return current sink to all diode cathodes via a star connection; must float when not used. |
| 5 | D3+ | passive | Diode current source to the anode of a remote diode junction; left floating when not used. |
| 6 | ADD1 | input | User-set SMBus address input, tied to ground (low), VCC (high), or left open (tri-level). |
| 7 | GND | power_in | Power supply ground. |
| 8 | GND | power_in | Power supply ground. |
| 9 | NC | unconnected | Manufacturing test pin; left floating. |
| 10 | ADD0 | input | User-set SMBus address input, tied to ground (low), VCC (high), or left open (tri-level). |
| 11 | INT | output | Open-drain interrupt output requiring a pull-up resistor; signals a controller interrupt or alert line. |
| 12 | SMBData | bidirectional | Open-drain SMBus (I2C) serial bidirectional data line requiring a pull-up resistor. |
| 13 | NC | unconnected | Manufacturing test pin; left floating. |
| 14 | SMBCLK | input | SMBus (I2C) clock input from the controller, requiring a pull-up resistor. |
| 15 | NC | unconnected | Manufacturing test pin; left floating. |
| 16 | T_CRIT_A | output | Open-drain critical temperature alarm output requiring a pull-up resistor; used for controller interrupt or system shutdown. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Sensors |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 3 | | 3.6 | V | | 5 |
| Specified Temperature Range LM83 | TMIN to TMAX | -40 | | 125 | ˚C | LM83 TMIN to TMAX | 5 |
| Supply Voltage | VCC | -0.3 | | 6 | V | | 5 |
| Voltage at Any Pin | | -0.3 | | | V | maximum is VCC + 0.3 V | 5 |
| D− Input Current | | -1 | | 1 | mA | | 5 |
| Input Current at All Other Pins | | | | 5 | mA | Note 2 | 5 |
| Package Input Current | | | | 20 | mA | Note 2 | 5 |
| SMBData, T_CRIT_A, INT Output Sink Current | | | | 10 | mA | | 5 |
| SMBCLK, SMBData, T_CRIT_A, INT Output Voltage | | | | 6 | V | | 5 |
| Storage Temperature | TSTORE | -65 | | 150 | ˚C | | 5 |
| Soldering Lead Temperature Vapor Phase | | | | 215 | ˚C | QSOP package, vapor phase 60 seconds | 5 |
| Soldering Lead Temperature Infrared | | | | 220 | ˚C | QSOP package, infrared 15 seconds | 5 |
| ESD Human Body Model | | | | 2000 | V | Note 4: 100 pF through 1.5 kΩ | 5 |
| ESD Machine Model | | | | 200 | V | Note 4: 200 pF direct into each pin | 5 |
| Temperature Error Using Local Diode | | -3 | 1 | 3 | ˚C | TA = 0 ˚C to +85˚C, VCC=+3.3V | 5 |
| Temperature Error Using Local Diode | | -4 | | 4 | ˚C | TA = −40 ˚C to +125˚C, VCC=+3.3V | 5 |
| Temperature Error Using Remote Diode | | -3 | | 3 | ˚C | TA = +60 ˚C to +100˚C, VCC=+3.3V | 5 |
| Temperature Error Using Remote Diode | | -4 | | 4 | ˚C | TA = 0 ˚C to +125˚C, VCC=+3.3V | 5 |
| Conversion Time of All Temperatures | | | 460 | 600 | ms | Note 10 | 5 |
| Quiescent Current | | | 0.5 | 0.8 | mA | SMBus (I2C) Inactive | 5 |
| Diode Source Current High Level | | 60 | | 125 | µA | (D+ − D−)=+ 0.65V; high level | 5 |
| Diode Source Current Low Level | | 5 | | 15 | µA | (D+ − D−)=+ 0.65V; low level | 5 |
| T_CRIT_A and INT Output Saturation Voltage | | | | 0.4 | V | IOUT = 3.0 mA | 5 |
| Power-On Reset Threshold | | | | 2.3 | V | On VCC input, falling edge | 5 |
| Power-On Reset Threshold | | 1.8 | | | V | On VCC input, falling edge | 5 |
| Logical 1 Input Voltage SMBData, SMBCLK | VIN(1) | 2.1 | | | V | | 6 |
| Logical 0 Input Voltage SMBData, SMBCLK | VIN(0) | | | 0.8 | V | | 6 |
| Logical 1 Input Current SMBData, SMBCLK | IIN(1) | | 0.005 | 1.5 | µA | VIN =VCC | 6 |
| Logical 0 Input Current SMBData, SMBCLK | IIN(0) | | -0.005 | 1.5 | µA | VIN = 0 V | 6 |
| Logical 1 Input Voltage ADD0, ADD1 | VIN(1) | 1.5 | | | V | | 6 |
| Logical 0 Input Voltage ADD0, ADD1 | VIN(0) | | | 0.6 | V | | 6 |
| Logical 1 Input Current ADD0, ADD1 | IIN(1) | | | 2 | µA | VIN =VCC | 6 |
| Logical 0 Input Current ADD0, ADD1 | IIN(0) | | | -2 | µA | VIN =0V | 6 |
| High Level Output Current | IOH | | | 100 | µA | VOH =VCC | 6 |
| SMBus Low Level Output Voltage | VOL | | | 0.4 | V | IOL = 3 mA | 6 |
| SMBus Low Level Output Voltage | VOL | | | 0.6 | V | IOL = 6 mA | 6 |
| SMBus Clock Frequency | fSMB | 10 | | 100 | kHz | | 7 |
| SMBus Clock Low Time | tLOW | 1.3 | | | µs | 10 % to 10 % | 7 |
| SMBus Clock Low Time | tLOW | | | 25 | ms | 10 % to 10 % | 7 |
| Cumulative Clock Low Extend Time | tLOWMEXT | | | 10 | ms | | 7 |
| SMBus Clock High Time | tHIGH | 0.6 | | | µs | 90 % to 90% | 7 |
| SMBus Rise Time | tR,SMB | | | 1 | µs | 10% to 90% | 7 |
| SMBus Fall Time | tF,SMB | | | 0.3 | ns | 90% to 10% | 7 |
| Output Fall Time | tOF | | | 250 | ns | CL = 400 pF, IO = 3 mA | 7 |
| SMBData and SMBCLK Time Low for Reset of Serial Interface | tTIMEOUT | 25 | | 40 | ms | Note 12 | 7 |
| SMBCLK Clock Period | t1 | 10 | | | µs | | 7 |
| Data In Setup Time to SMBCLK High | t2, tSU;DAT | 100 | | | ns | | 7 |
| Data Out Stable after SMBCLK Low | t3, tHD;DAT | 300 | | | ns | maximum listed as TBD | 7 |
| SMBData Low Setup Time to SMBCLK Low | t4, tHD;STA | 100 | | | ns | | 7 |
| SMBData High Delay Time after SMBCLK High | t5, tSU;STO | 100 | | | ns | Stop condition setup | 7 |
| SMBus Start-Condition Setup Time | t6, tSU;STA | 0.6 | | | µs | | 7 |
| SMBus Free Time | tBUF | 1.3 | | | µs | | 7 |
| D− Source Voltage | | | 0.7 | | V | | 5 |
| SMBus Input Hysteresis | VIN(HYST) | | 300 | | mV | SMBData and SMBCLK digital input | 6 |
| Input Capacitance | CIN | | 20 | | pF | | 6 |
| Local and Remote T_CRIT and HIGH Default Temperature | | | 127 | | ˚C | Note 11, default values set at power up | 5 |
## CAD (KiCad official)
- Symbol: `LM83CIMQAX`
- Footprint: `Package_SO:SSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `lm83cimqax-etched.step` / `lm83cimqax-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm83cimqax.step` / `lm83cimqax.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm83.pdf) (23 pp, sha256 `ed0018c7adb9d575`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm83cimqax-datasheet.pdf)