Generated by kicad-footprint-generator · KiCad file format 20260206
LM833N
Texas Instruments · Audio Amplifiers · PDIP-8
LM833N from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A; output voltage swing ±12V min / ±13.4V typ into RL=2kΩ with ±15V supply; capacitive loads >50pF must be isolated with a series output resistor. |
| 2 | -IN A | input | Inverting input of amplifier A; input offset voltage 0.3mV typ / 5mV max (RS=10Ω); input bias current 500nA typ / 1000nA max; input noise voltage 4.5nV/√Hz typ at f=1kHz. |
| 3 | +IN A | input | Non-inverting input of amplifier A; input common-mode range ±12V min / ±14V typ with ±15V supply; CMRR 80dB min / 100dB typ with VIN=±12V. |
| 4 | -VEE | power_in | Negative power supply; total supply voltage VCC−VEE ≤36V absolute maximum; shared by both amplifiers. |
| 5 | +IN B | input | Non-inverting input of amplifier B; input common-mode range ±12V min / ±14V typ with ±15V supply; CMRR 80dB min / 100dB typ. |
| 6 | -IN B | input | Inverting input of amplifier B; input offset voltage 0.3mV typ / 5mV max (RS=10Ω); input bias current 500nA typ / 1000nA max. |
| 7 | OUT B | output | Output of amplifier B; output voltage swing ±12V min / ±13.4V typ into RL=2kΩ with ±15V supply; slew rate 5V/μs min / 7V/μs typ. |
| 8 | +VCC | power_in | Positive power supply; total supply voltage VCC−VEE ≤36V absolute maximum; both amplifiers combined draw 5mA typ / 8mA max at VO=0V, ±15V supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 0.3 | 5 | mV | RS = 10Ω | 3 | |
| Input Offset Current | IOS | 10 | 200 | nA | 3 | ||
| Input Bias Current | IB | 500 | 1000 | nA | 3 | ||
| Voltage Gain | AV | 90 | 110 | dB | RL = 2 kΩ, VO = ±10V | 3 | |
| Output Voltage Swing | VOM | 12 | 13.5 | V | RL = 10 kΩ | 3 | |
| Output Voltage Swing | VOM | 12 | 13.4 | V | RL = 2 kΩ | 3 | |
| Input Common-Mode Range | VCM | 12 | 14 | V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 80 | 100 | dB | VIN = ±12V | 3 | |
| Power Supply Rejection Ratio | PSRR | 80 | 100 | dB | VS = 15 ∼ 5V, −15 ∼ −5V | 3 | |
| Supply Current | IQ | 5 | 8 | mA | VO = 0V, Both Amps | 3 | |
| Slew Rate | SR | 5 | 7 | V/μs | RL = 2 kΩ | 3 | |
| Gain Bandwidth Product | GBW | 10 | 15 | MHz | f = 100 kHz | 3 | |
| Supply Voltage | 36 | V | VCC–VEE | 2 | |||
| Differential Input Voltage | VI | -30 | 30 | V | 2 | ||
| Input Voltage Range | VIC | -15 | 15 | V | If supply voltage is less than ±15V, it is equal to supply voltage | 2 | |
| Power Dissipation | PD | 500 | mW | TA ≤ 85°C | 2 | ||
| Operating Temperature Range | TOPR | -40 | 85 | °C | 2 | ||
| Storage Temperature Range | TSTG | -60 | 150 | °C | 2 | ||
| Soldering Temperature, PDIP Package | 260 | °C | PDIP package soldering, 10 seconds | 2 | |||
| ESD Tolerance | 1600 | V | Human body model, 1.5 kΩ in series with 100 pF | 2 |
CAD (KiCad official)
- Symbol:
LM833N - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lm833n-etched.step/lm833n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm833n.step/lm833n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
3255dcce01ee3368, retrieved 2026-09-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).