main
Ray
lm833m: laser-etched CAD + chip hero (factory 2.0.0 backfill)
d95b341
LM833M
HGSEMI · Low Noise Amplifiers (LNA) - RF · SOP-8
LM833M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Amplifier 1 output. Push-pull output stage with no deadband crossover distortion, symmetrical source/sink AC response, capable of driving 2 kΩ loads to within ~1.3 V of the supply rails. |
| 2 | IN1- | input | Amplifier 1 inverting input. High-impedance bipolar input, typical input bias current 300 nA, input offset voltage 0.3 mV typ. Common-mode range typically −12 V to +14 V on ±15 V supplies. |
| 3 | IN1+ | input | Amplifier 1 non-inverting input. High-impedance bipolar input, typical input bias current 300 nA. Input voltage must not exceed VCC/VEE magnitude; absolute maximum input voltage ±15 V. |
| 4 | VCC- | power_in | Negative supply rail (VEE). Typical operation at −15 V; total supply (VCC to VEE) rated 36 V max. Quiescent current 4 mA typ for both amplifiers. |
| 5 | IN2+ | input | Amplifier 2 non-inverting input. High-impedance bipolar input, typical input bias current 300 nA. Input voltage must not exceed VCC/VEE magnitude; absolute maximum input voltage ±15 V. |
| 6 | IN2- | input | Amplifier 2 inverting input. High-impedance bipolar input, typical input bias current 300 nA, input offset voltage 0.3 mV typ. |
| 7 | OUT2 | output | Amplifier 2 output. Push-pull output stage with no deadband crossover distortion, symmetrical source/sink AC response, capable of driving 2 kΩ loads to within ~1.3 V of the supply rails. |
| 8 | VCC+ | power_in | Positive supply rail (VCC). Typical operation at +15 V; total supply (VCC to VEE) rated 36 V max. Bypass with a local ceramic capacitor to the negative rail. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | RF And Wireless |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM833MM/TRLM833MNLM833MMM/TRLM833MDQ3/TR
CAD (KiCad official)
- Symbol:
LM833M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm833m-etched.step/lm833m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm833m.step/lm833m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (11 pp, sha256
fc33284fd90bdce1, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM833M
**HGSEMI** · Low Noise Amplifiers (LNA) - RF · SOP-8
LM833M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Amplifier 1 output. Push-pull output stage with no deadband crossover distortion, symmetrical source/sink AC response, capable of driving 2 kΩ loads to within ~1.3 V of the supply rails. |
| 2 | IN1- | input | Amplifier 1 inverting input. High-impedance bipolar input, typical input bias current 300 nA, input offset voltage 0.3 mV typ. Common-mode range typically −12 V to +14 V on ±15 V supplies. |
| 3 | IN1+ | input | Amplifier 1 non-inverting input. High-impedance bipolar input, typical input bias current 300 nA. Input voltage must not exceed VCC/VEE magnitude; absolute maximum input voltage ±15 V. |
| 4 | VCC- | power_in | Negative supply rail (VEE). Typical operation at −15 V; total supply (VCC to VEE) rated 36 V max. Quiescent current 4 mA typ for both amplifiers. |
| 5 | IN2+ | input | Amplifier 2 non-inverting input. High-impedance bipolar input, typical input bias current 300 nA. Input voltage must not exceed VCC/VEE magnitude; absolute maximum input voltage ±15 V. |
| 6 | IN2- | input | Amplifier 2 inverting input. High-impedance bipolar input, typical input bias current 300 nA, input offset voltage 0.3 mV typ. |
| 7 | OUT2 | output | Amplifier 2 output. Push-pull output stage with no deadband crossover distortion, symmetrical source/sink AC response, capable of driving 2 kΩ loads to within ~1.3 V of the supply rails. |
| 8 | VCC+ | power_in | Positive supply rail (VCC). Typical operation at +15 V; total supply (VCC to VEE) rated 36 V max. Bypass with a local ceramic capacitor to the negative rail. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | RF And Wireless |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LM833MM/TR`
- `LM833MN`
- `LM833MMM/TR`
- `LM833MDQ3/TR`
## CAD (KiCad official)
- Symbol: `LM833M`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `lm833m-etched.step` / `lm833m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm833m.step` / `lm833m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8756657897453834240) (11 pp, sha256 `fc33284fd90bdce1`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm833m-datasheet.pdf)