← Commit history

lm75bimx-3: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·371dd275b2 · ·parent 885edb9
1 file changed +75−1
page.json+75−1
@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LM75BIMX-3",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Temperature and Humidity Sensor",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm75bimx-3.pdf",+    "parts": {+      "symbol": "lm75bimx-3.kicad_sym",+      "footprint": "lm75bimx-3.kicad_mod",+      "model_3d": "lm75bimx-3-etched.glb",+      "model_3d_plain": "lm75bimx-3.glb",+      "model_3d_step": "lm75bimx-3-etched.step",+      "model_3d_step_plain": "lm75bimx-3.step",+      "lbr": "lm75bimx-3.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C serial bi-directional data line, open-drain. Requires an external pull-up resistor (or current source) to +VS. Operates up to 400 kHz."+      },+      {+        "number": "2",+        "name": "SCL",+        "type": "input",+        "description": "I2C clock input from the bus controller. Requires an external pull-up resistor (or current source) to +VS. Operates up to 400 kHz."+      },+      {+        "number": "3",+        "name": "O.S.",+        "type": "output",+        "description": "Over-temperature Shutdown alert output, open-drain (sink up to 10 mA). Requires an external pull-up resistor; asserts when the measured temperature crosses the programmable T_OS limit and releases at T_HYST. Polarity and fault-queue depth are configurable via the configuration register; typically wired to a controller interrupt line."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Power supply ground / device reference. Connect to system ground."+      },+      {+        "number": "5",+        "name": "A2",+        "type": "input",+        "description": "User-set I2C address input bit A2. Tie to GND for logic 0 or to +VS for logic 1 to select one of eight I2C slave addresses (base address 0x48 = 1001_000x, offset by {A2,A1,A0})."+      },+      {+        "number": "6",+        "name": "A1",+        "type": "input",+        "description": "User-set I2C address input bit A1. Tie to GND for logic 0 or to +VS for logic 1 to select the device's I2C slave address."+      },+      {+        "number": "7",+        "name": "A0",+        "type": "input",+        "description": "User-set I2C address input bit A0. Tie to GND for logic 0 or to +VS for logic 1 to select the device's I2C slave address."+      },+      {+        "number": "8",+        "name": "+VS",+        "type": "power_in",+        "description": "Positive supply voltage input, 3 V to 5.5 V (absolute maximum 6.5 V). Decouple with a 100-nF bypass capacitor near the pin plus ~10 µF of bulk capacitance."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}