LM75BIMMX-3

{
 "schema": "adom.pads/1",
 "slug": "lm75bimmx-3",
 "footprint": "VSSOP-8_2.3x2mm_P0.5mm",
 "generated_from": {
  "footprint": "VSSOP-8_2.3x2mm_P0.5mm@sha256:dca72da69de3263a",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.4,
   -0.75
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "VSSOP-8_2.3x2mm_P0.5mm@sha256:dca72da69de3263a"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.4,
    -0.75
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "SDA",
   "type": "bidirectional",
   "description": "I2C serial bi-directional data line. Open-drain; requires an external pullup resistor or current source to +VS. VIH = +VS × 0.7 min, VIL = +VS × 0.3 max. Absolute-max voltage 6.5 V.",
   "is_pin1": true,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.4,
    -0.25
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "SCL",
   "type": "input",
   "description": "I2C serial clock input. Requires an external pullup resistor to +VS. Supports operation up to 400 kHz. Absolute-max voltage 6.5 V.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.4,
    0.25
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "O.S.",
   "type": "output",
   "description": "Over-temperature shutdown output. Open-drain; requires a pullup resistor to the controller interrupt line. Active-low when the measured temperature exceeds the programmed T_OS limit (default 80°C, T_HYST 75°C). O.S. output saturation voltage 0.8 V max at 4 mA sink; max sink current 10 mA.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.4,
    0.75
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "GND",
   "type": "power_in",
   "description": "Power supply ground reference for the device.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.4,
    0.75
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "A2",
   "type": "input",
   "description": "User-set I2C address input (MSB of the 3-bit address selector). Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be ≤ 6.5 V.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.4,
    0.25
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "A1",
   "type": "input",
   "description": "User-set I2C address input. Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be ≤ 6.5 V.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.4,
    -0.25
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "A0",
   "type": "input",
   "description": "User-set I2C address input (LSB of the 3-bit address selector). Tie to GND (logic 0) or +VS (logic 1). Absolute-max voltage (+VS + 0.3) V and must be ≤ 6.5 V.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.4,
    -0.75
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "+VS",
   "type": "power_in",
   "description": "Positive supply voltage input. DC 3 V to 5.5 V (LM75BIMMX-3 nominal 3.3 V). Decouple with a 100-nF bypass capacitor close to the pin plus 10-µF bulk capacitance in the near vicinity. Operating supply current 280 µA typical; shutdown 4 µA typical.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}