← Commit history

Initial commit: component/lm75aimmx

Ray ·ef263c38ca ·
2 files changed +82
README.mdadded+48
@@ -0,0 +1,48 @@+# LM75AIMMX++**Texas Instruments** · Temperature and Humidity Sensor · VSSOP-8++LM75AIMMX from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDA | bidirectional | I2C serial bi-directional data line, open-drain. Requires an external pull-up resistor (or current source) to +VS. Compatible with I2C bus speeds up to 400 kHz. |+| 2 | SCL | input | I2C serial clock input from the bus controller. Requires an external pull-up resistor (or current source) to +VS. Input logic levels are referenced to +VS (VIH = 0.7·VS, VIL = 0.3·VS). |+| 3 | O.S. | output | Over-temperature shutdown open-drain output. Asserts (active low) when the measured temperature exceeds the programmed TOS limit; behavior is comparator or interrupt mode per the Configuration register. Sink capability up to 10 mA; connect a pull-up resistor to the host interrupt line and it may be wire-OR'd with other O.S. outputs. |+| 4 | GND | power_in | Power supply ground reference for the device. Connect to the system ground plane. |+| 5 | A2 | input | User-set I2C address input bit 2. Tie to GND for logic '0' or to +VS for logic '1' to select one of eight possible slave addresses on the shared 2-wire bus. |+| 6 | A1 | input | User-set I2C address input bit 1. Tie to GND for logic '0' or to +VS for logic '1' to select the slave address. |+| 7 | A0 | input | User-set I2C address input bit 0 (LSB). Tie to GND for logic '0' or to +VS for logic '1' to select the slave address. |+| 8 | +VS | power_in | Positive supply voltage input, 2.7 V to 5.5 V. Bypass locally with a 100 nF ceramic capacitor mounted close to the pin, plus 10 µF bulk capacitance in the near vicinity. Typical operating current is 280 µA (4 µA in shutdown). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8 |+| Category | Sensor |+| Pins | 8 |++## Ordering variants++- `LM75AIMMX`+- `LM75AIMMXIMX`++## CAD (KiCad official)++- Symbol: `LM75AIMMX`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/lm75aimmx-datasheet.pdf) (31 pp, sha256 `852d26dc7c785da0`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm75aimmx-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "lm75aimmx",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Temperature and Humidity Sensor, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensor",+    "lm75aimmx"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm75aimmx.kicad_sym",+    "lm75aimmx.kicad_mod",+    "lm75aimmx.glb",+    "lm75aimmx.step",+    "lm75aimmx.lbr",+    "docs/hero.png",+    "docs/lm75aimmx-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file