main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm75ad-tudi: viewers · Ray
lm75ad-tudi-etched.glb Publish 0.1.0 · Ray
lm75ad-tudi-etched.step lm75ad-tudi: factory component page (tier=lcsc) · Ray
lm75ad-tudi-hero.glb lm75ad-tudi: hero GLB from the etched model (keeps the MPN mark) · Ray
lm75ad-tudi-hero.overlay.json Publish 0.1.0 · Ray
lm75ad-tudi.glb Publish 0.1.0 · Ray
lm75ad-tudi.kicad_mod Publish 0.1.0 · Ray
lm75ad-tudi.kicad_sym Publish 0.1.0 · Ray
lm75ad-tudi.lbr Publish 0.1.0 · Ray
lm75ad-tudi.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

LM75AD-TUDI

Tudi · Temperature Sensors · SOP-8

LM75AD-TUDI from Tudi, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional Digital I/O, I2C bus bidirectional data line with open-drain output; needs an external pull-up (about 10 kΩ) and must not float.
2 SCL input Digital input for the I2C bus clock; needs an external pull-up (about 10 kΩ) and must not float.
3 OS output Overtemperature shutdown/interrupt open-drain output with programmable polarity, needing an external pull-up resistor of up to 200 kΩ.
4 GND power_in Ground, connected to the system ground.
5 A2 input Digital input where the user configures I2C address bit 2 (tie to GND or VCC, do not float).
6 A1 input Digital input where the user configures I2C address bit 1 (tie to GND or VCC, do not float).
7 A0 input Digital input where the user configures I2C address bit 0 (tie to GND or VCC, do not float).
8 VCC power_in Power supply input, 2.8 V to 5.5 V, with a decoupling capacitor recommended.

Key specifications

Parameter Value
Manufacturer Tudi
Package SOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2.8 5.5 V Recommended working conditions 18
Operating ambient temperature range Tamb -55 125 °C 2
Temperature accuracy -0.5 0.5 °C 0°C to +50°C 2
Temperature accuracy -1 1 °C -25°C to +100°C 2
I2C bus frequency range (lower limit) 20 Hz I2C bus clock 2
I2C bus frequency range (upper limit) 400 kHz I2C bus clock 2
OS pull-up resistor 200 kΩ OS open-drain output; resistor as large as possible 11
Bus error timeout tto 75 ms SDA held low 6
ESD protection, HBM 4500 V JESD22-A114 2
ESD protection, CDM 1000 V JESD22-C101 2
Latch-up test current 100 mA Latch test per JESD78 2
SCL/SDA input hysteresis voltage 500 mV SCL and SDA input thresholds 17
POR-related low-voltage duration 2 µs VCC below POR level (about 1.0 V) for longer than this time before reset 13
Shutdown (sleep mode) supply current 0.1 µA Sleep mode 13
Power-on reset threshold voltage POR 1 V VCC drops below this level 13
Temperature conversion time tconv(T) 10 ms Normal mode 3
Temperature conversion cycle Tconv 100 ms Normal mode, one conversion every cycle 3
Temperature resolution (11-bit) 0.125 °C Temperature register 2
Setpoint resolution (Tos, Thyst) 0.5 °C 9-bit Tos and Thyst registers 11
Default overtemperature threshold Tth(ots) 80 °C Power-on default 4
Default hysteresis temperature Thyst 75 °C Power-on default 4
Breakdown voltage, address/OS pins 11 V ESD latch-based breakdown, typical 17
Breakdown voltage, SCL/SDA pins 9.5 V ESD latch-based breakdown, typical 17
I2C pull-up resistor (external, SCL and SDA) 10 kΩ Required when bus pull-up is not installed 6

CAD (KiCad official)

  • Symbol: LM75AD-TUDI
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm75ad-tudi-etched.step / lm75ad-tudi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm75ad-tudi.step / lm75ad-tudi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Tudi datasheet (25 pp, sha256 a48faa5d824b6153, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF