component
LM74900QRGERQ1
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
lm74900qrgerq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+94−14
package.json+52−12@@ -80,7 +80,7 @@ "number": "3", "name": "SW", "type": "input",- "description": "Battery sensing disconnect switch terminal; top node of OV/UVLO resistor ladder; internal switch resistance 10-46 \u03a9 (3-65 V) disconnects ladder when EN or SLEEP is low to eliminate leakage."+ "description": "Battery sensing disconnect switch terminal; top node of OV/UVLO resistor ladder; internal switch resistance 10-46 Ω (3-65 V) disconnects ladder when EN or SLEEP is low to eliminate leakage." }, { "number": "4",@@ -98,13 +98,13 @@ "number": "6", "name": "EN", "type": "input",- "description": "Enable input; logic high enables charge pump and gate drivers; falling below V(ENF) 0.41-0.98 V places device in shutdown at 2.5-5 \u00b5A; connect to VS for always-ON; withstands 0-65 V, leakage 55-200 nA."+ "description": "Enable input; logic high enables charge pump and gate drivers; falling below V(ENF) 0.41-0.98 V places device in shutdown at 2.5-5 µA; connect to VS for always-ON; withstands 0-65 V, leakage 55-200 nA." }, { "number": "7", "name": "SLEEP", "type": "input",- "description": "Active-low SLEEP mode input; when low with EN high, disables charge pump and both gate drives, device draws 5.5-10 \u00b5A; internal bypass switch supports up to 100 mA peak to always-ON loads."+ "description": "Active-low SLEEP mode input; when low with EN high, disables charge pump and both gate drives, device draws 5.5-10 µA; internal bypass switch supports up to 100 mA peak to always-ON loads." }, { "number": "8",@@ -116,13 +116,13 @@ "number": "9", "name": "TMR", "type": "passive",- "description": "Fault timer node; capacitor from TMR to GND sets circuit-breaker turn-off delay (CTMR charged at 65-97 \u00b5A source, discharged at 2-3.15 \u00b5A sink) and auto-retry period; leave open for fastest response or tie to GND to disable OCP."+ "description": "Fault timer node; capacitor from TMR to GND sets circuit-breaker turn-off delay (CTMR charged at 65-97 µA source, discharged at 2-3.15 µA sink) and auto-retry period; leave open for fastest response or tie to GND to disable OCP." }, { "number": "10", "name": "IMON", "type": "output",- "description": "Analog current monitor output; sources scaled replica of sense voltage per VIMON = (RIMON/0.9) \u00d7 (VSENSE/RSET); accuracy \u00b112.5% at VSENSE = 20 mV; output range 0-5 V; leave floating if unused."+ "description": "Analog current monitor output; sources scaled replica of sense voltage per VIMON = (RIMON/0.9) × (VSENSE/RSET); accuracy ±12.5% at VSENSE = 20 mV; output range 0-5 V; leave floating if unused." }, { "number": "11",@@ -134,7 +134,7 @@ "number": "12", "name": "FLT", "type": "output",- "description": "Open-drain fault output; pulled low on UVLO, OV, OCP, or SCP events; pull-down resistance 11-60 \u03a9; withstands 0-65 V; leakage -100 to +400 nA; requires external pull-up resistor."+ "description": "Open-drain fault output; pulled low on UVLO, OV, OCP, or SCP events; pull-down resistance 11-60 Ω; withstands 0-65 V; leakage -100 to +400 nA; requires external pull-up resistor." }, { "number": "13",@@ -146,7 +146,7 @@ "number": "14", "name": "HGATE", "type": "output",- "description": "Load-disconnect MOSFET Q2 gate drive output; V(HGATE)-V(OUT) = 10-14.5 V for VS 5-65 V; source current 39-75 \u00b5A, sink current 128-180 mA during OV event; connect to GATE of external N-channel MOSFET."+ "description": "Load-disconnect MOSFET Q2 gate drive output; V(HGATE)-V(OUT) = 10-14.5 V for VS 5-65 V; source current 39-75 µA, sink current 128-180 mA during OV event; connect to GATE of external N-channel MOSFET." }, { "number": "15",@@ -170,7 +170,7 @@ "number": "18", "name": "ISCP", "type": "input",- "description": "Short-circuit protection threshold setting; leave floating to disable SCP; short to CS+ for 20 mV (typ) internal threshold; external series RISCP shifts threshold by 10.5 \u00b5A \u00d7 RISCP + 20 mV; bias current 9.5-12 \u00b5A."+ "description": "Short-circuit protection threshold setting; leave floating to disable SCP; short to CS+ for 20 mV (typ) internal threshold; external series RISCP shifts threshold by 10.5 µA × RISCP + 20 mV; bias current 9.5-12 µA." }, { "number": "19",@@ -182,7 +182,7 @@ "number": "20", "name": "CS+", "type": "input",- "description": "Current sense amplifier positive input; connect to positive terminal of external sense resistor RSNS; RSET (50-100 \u03a9) from CS+ to VS scales OCP threshold; differential range CS+ to CS- limited to -0.3 V to +0.3 V absolute maximum."+ "description": "Current sense amplifier positive input; connect to positive terminal of external sense resistor RSNS; RSET (50-100 Ω) from CS+ to VS scales OCP threshold; differential range CS+ to CS- limited to -0.3 V to +0.3 V absolute maximum." }, { "number": "21",@@ -194,7 +194,7 @@ "number": "22", "name": "VS", "type": "power_in",- "description": "IC power supply input; connect to common-drain midpoint of back-to-back MOSFET configuration; operating range 3-65 V; decouple with 100-nF capacitor to GND; quiescent current 630-750 \u00b5A (EN high, 12 V)."+ "description": "IC power supply input; connect to common-drain midpoint of back-to-back MOSFET configuration; operating range 3-65 V; decouple with 100-nF capacitor to GND; quiescent current 630-750 µA (EN high, 12 V)." }, { "number": "23",@@ -250,6 +250,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm74900qrgerq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm74900qrgerq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ed50171cbdf9adbb3782b359b2069df3287ce4b90dbababfd7b220f2613ecb3a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -235,7 +235,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm74900qrgerq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm74900qrgerq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ed50171cbdf9adbb3782b359b2069df3287ce4b90dbababfd7b220f2613ecb3a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -282,4 +322,4 @@ "visibility": { "public": true }-}+}