Generated by kicad-footprint-generator · KiCad file format 20260206
LM73CIMKX-1
Texas Instruments · Temperature Sensors · TSOT-23-6L
LM73CIMKX-1 from Texas Instruments, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADDR | input | Three-level logic address select input; one of three device addresses is chosen by connecting it to ground, leaving it floating, or connecting it to VDD. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | VDD | power_in | Power supply pin; recommended operating supply range is 2.7 V to 5.5 V. |
| 4 | SMBCLK | input | SMBus serial clock input that operates up to 400 kHz and is low-pass filtered. |
| 5 | ALERT | output | Open-drain digital output that goes active whenever the measured temperature exceeds a programmable temperature limit. |
| 6 | SMBDAT | bidirectional | Open-drain SMBus bidirectional serial data line, synchronous to SMBCLK and low-pass filtered. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6L |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 2.7 | 5.5 | V | Recommended operating conditions, LM73CIMK-0 and LM73CIMK-1 | 4 | |
| Operating free-air temperature range | TA | -40 | 150 | °C | LM73CIMK-0, LM73CIMK-1 | 4 | |
| Supply Voltage | -0.3 | 6 | V | 4 | |||
| Voltage at SMBCLK and SMBDAT pins | -0.3 | 6 | V | 4 | |||
| Voltage at all other pins | -0.3 | V | Maximum printed as (VDD + 0.5) V | 4 | |||
| Input current at any pin | -5 | 5 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD Human-body model | V(ESD) | -2000 | 2000 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD Machine model | V(ESD) | -200 | 200 | V | Machine model | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 224 | °C/W | DDC (SOT) 6-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 89 | °C/W | DDC (SOT) 6-pin package | 4 | ||
| Temperature accuracy | -1 | 1 | °C | TA = -10°C to 80°C, VDD = 2.7V to 4.5V | 5 | ||
| Temperature accuracy | -1.5 | 1.5 | °C | TA = -25°C to 115°C, VDD = 2.7V to 4.5V | 5 | ||
| Temperature accuracy | -2 | 2 | °C | TA = -40°C to 150°C, VDD = 2.7V to 4.5V | 5 | ||
| Temperature accuracy | -2.5 | 2.5 | °C | TA = -40°C to 150°C, VDD = 5.5V | 5 | ||
| Temperature conversion time 11 bits | 10.1 | 14 | ms | RES1 bit = 0, RES0 bit = 0 | 5 | ||
| Temperature conversion time 12 bits | 20.2 | 28 | ms | RES1 bit = 0, RES0 bit = 1 | 5 | ||
| Temperature conversion time 13 bits | 40.4 | 56 | ms | RES1 bit = 1, RES0 bit = 0 | 5 | ||
| Temperature conversion time 14 bits | 80.8 | 112 | ms | RES1 bit = 1, RES0 bit = 1 | 5 | ||
| Quiescent current, continuous conversion | 320 | 495 | µA | Continuous conversion mode, SMBus inactive, TA = TJ = TMIN to TMAX | 5 | ||
| Quiescent current, shutdown, bus-idle timers on | 120 | 175 | µA | Shutdown, bus-idle timers on, TA = TJ = TMIN to TMAX | 5 | ||
| Quiescent current, shutdown, bus-idle timers off | 1.9 | 8 | µA | Shutdown, bus-idle timers off, TA = TJ = TMIN to TMAX | 5 | ||
| Power-on reset threshold | 0.9 | V | Measured on VDD input, falling edge, TA = TJ = TMIN to TMAX | 5 | |||
| SMBus low level output voltage | VOL | 0.4 | V | IOL = 3 mA, TA = TJ = TMIN to TMAX | 6 | ||
| Logical 1 input current | IIH | 0.01 | 2 | µA | VIN = VDD, TA = TJ = TMIN to TMAX | 6 | |
| Logical 0 input current | IIL | -2 | -0.01 | µA | VIN = 0 V, TA = TJ = TMIN to TMAX | 6 | |
| Input capacitance | CIN | 5 | pF | 6 | |||
| Address pin low input voltage | VIL;ADDRESS | 0.1 | V | TA = TJ = TMIN to TMAX | 6 | ||
| Address pin high input current | IIH;ADDRESS | 0.01 | 2 | µA | VIN = VDD, TA = TJ = TMIN to TMAX | 6 | |
| Address pin low input current | IIL;ADDRESS | -2 | -0.01 | µA | VIN = 0 V, TA = TJ = TMIN to TMAX | 6 | |
| SMBus clock frequency | fSMB | 400 | kHz | TA = TJ = TMIN to TMAX; no minimum clock frequency if time-out feature disabled | 7 | ||
| SMBus clock low time | tLOW | 300 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| SMBus clock high time | tHIGH | 300 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Output fall time | tF;SMBO | 250 | ns | CL = 400 pF, IPULL-UP ≤ 3 mA | 7 | ||
| Time-out for reset of serial interface | tTIMEOUT | 15 | 45 | ms | SMBDAT and SMBCLK low, TA = TJ = TMIN to TMAX | 7 | |
| Data in setup time to SMBCLK high | tSU;DAT | 100 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Data hold time, data in stable after SMBCLK low | tHD;DAT | 0 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Data hold time, data out stable after SMBCLK low | tHD;DATO | 30 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Start condition hold time | tHD;STA | 60 | ns | SMBDAT low to SMBCLK low, TA = TJ = TMIN to TMAX | 7 | ||
| Stop condition setup time | tSU;STO | 50 | ns | SMBCLK high to SMBDAT low, TA = TJ = TMIN to TMAX | 7 | ||
| Repeated start condition setup time | tSU;STA | 50 | ns | SMBCLK high to SMBDAT low, TA = TJ = TMIN to TMAX | 7 | ||
| Bus free time between stop and start | tBUF | 1.2 | µs | TA = TJ = TMIN to TMAX | 7 | ||
| Power-on reset time | tPOR | 1 | ms | TA = TJ = TMIN to TMAX | 7 |
CAD (KiCad official)
- Symbol:
LM73CIMKX-1 - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
lm73cimkx-1-etched.step/lm73cimkx-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm73cimkx-1.step/lm73cimkx-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
17403337eae090f5, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).