LM73CIMKX-0

{
  "slug": "lm73cimkx-0",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Temperature Sensors, TSOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "lm73cimkx-0",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm73cimkx-0.kicad_sym",
    "lm73cimkx-0.kicad_mod",
    "lm73cimkx-0.glb",
    "lm73cimkx-0.step",
    "lm73cimkx-0.lbr",
    "docs/hero.png",
    "docs/lm73cimkx-0-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm73cimkx-0-hero.glb",
    "lm73cimkx-0-hero.overlay.json",
    "lm73cimkx-0-etched.glb"
  ],
  "component": {
    "mpn": "LM73CIMKX-0",
    "manufacturer": "Texas Instruments",
    "package": "TSOT-23-6L",
    "pin_count": 6,
    "category": "Sensors",
    "subcategory": "Temperature Sensors",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm73",
    "parts": {
      "symbol": "lm73cimkx-0.kicad_sym",
      "footprint": "lm73cimkx-0.kicad_mod",
      "model_3d": "lm73cimkx-0-hero.glb",
      "model_3d_plain": "lm73cimkx-0-etched.glb",
      "model_3d_step": "lm73cimkx-0-etched.step",
      "model_3d_step_plain": "lm73cimkx-0.step",
      "lbr": "lm73cimkx-0.lbr"
    },
    "distributor_links": {
      "lcsc": "C2867406"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T07:14:44Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ADDR",
        "type": "input",
        "description": "Address select input: one of three device addresses is selected by connecting this three-level CMOS input to ground, leaving it floating, or connecting it to VDD."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "3",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input; the recommended operating supply range is 2.7 V to 5.5 V."
      },
      {
        "number": "4",
        "name": "SMBCLK",
        "type": "input",
        "description": "SMBus serial clock input that operates up to 400 kHz and is low-pass filtered."
      },
      {
        "number": "5",
        "name": "ALERT",
        "type": "output",
        "description": "Open-drain digital output that goes active whenever the measured temperature exceeds a programmable temperature limit."
      },
      {
        "number": "6",
        "name": "SMBDAT",
        "type": "bidirectional",
        "description": "SMBus bidirectional open-drain serial data line, synchronous to SMBCLK and low-pass filtered."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table on page 3 is labeled SOT-23 (6 pins). The ordering addendum (page 24) and tape/reel ta; The datasheet's Recommended Operating Conditions list LM73CIMK-0 and LM73CIMK-1 but the pin table co"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0411,
        "at": "2026-10-17T07:12:48"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm73",
        "pages": 31,
        "sha256": "17403337eae090f5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm73cimkx-0.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm73cimkx-0-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "15daa8bfb2c7d0c17092410ff74b6a05148d6f17dcce80ae43d4072bc84349a2",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}