component
LM73CIMKX-0
Public Made by Adomby adom
Texas Instruments Temperature Sensors, TSOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LM73CIMKX-0
Texas Instruments · Temperature Sensors · TSOT-23-6L
LM73CIMKX-0 from Texas Instruments, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADDR | input | Address select input: one of three device addresses is selected by connecting this three-level CMOS input to ground, leaving it floating, or connecting it to VDD. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | VDD | power_in | Power supply input; the recommended operating supply range is 2.7 V to 5.5 V. |
| 4 | SMBCLK | input | SMBus serial clock input that operates up to 400 kHz and is low-pass filtered. |
| 5 | ALERT | output | Open-drain digital output that goes active whenever the measured temperature exceeds a programmable temperature limit. |
| 6 | SMBDAT | bidirectional | SMBus bidirectional open-drain serial data line, synchronous to SMBCLK and low-pass filtered. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6L |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range (VDD) | VDD | 2.7 | 5.5 | V | Over operating free-air temperature range | 4 | |
| Operating free-air temperature range | -40 | 150 | °C | LM73CIMK-0 | 4 | ||
| Supply Voltage | -0.3 | 6 | V | Over operating free-air temperature range | 4 | ||
| Voltage at SMBCLK and SMBDAT pins | -0.3 | 6 | V | 4 | |||
| Voltage at All Other Pins | -0.3 | 6 | V | 4 | |||
| Input Current at Any Pin | -5 | 5 | mA | Printed as ±5 mA | 4 | ||
| Storage Temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 224 | °C/W | DDC (SOT) 6-pin package; single value printed, no min/max | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 89 | °C/W | DDC (SOT) 6-pin package; single value printed, no min/max | 4 | ||
| Temperature accuracy | -1 | 1 | °C | VDD = 2.7V to 4.5V; TA = TJ = TMIN to TMAX; TA = -10°C to 80°C | 5 | ||
| Temperature accuracy | -1.5 | 1.5 | °C | VDD = 2.7V to 4.5V; TA = TJ = TMIN to TMAX; TA = -25°C to 115°C | 5 | ||
| Temperature accuracy | -2 | 2 | °C | VDD = 2.7V to 4.5V; TA = TJ = TMIN to TMAX; TA = -40°C to 150°C | 5 | ||
| Temperature accuracy | -2.5 | 2.5 | °C | VDD = 5.5V; TA = TJ = TMIN to TMAX; TA = -40°C to 150°C | 5 | ||
| Temperature conversion time, 11-bit | 10.1 | 14 | ms | RES1 Bit = 0, RES0 Bit = 0; TA = TJ = TMIN to TMAX (max) | 5 | ||
| Temperature conversion time, 12-bit | 20.2 | 28 | ms | RES1 Bit = 0, RES0 Bit = 1; TA = TJ = TMIN to TMAX (max) | 5 | ||
| Temperature conversion time, 13-bit | 40.4 | 56 | ms | RES1 Bit = 1, RES0 Bit = 0; TA = TJ = TMIN to TMAX (max) | 5 | ||
| Temperature conversion time, 14-bit | 80.8 | 112 | ms | RES1 Bit = 1, RES0 Bit = 1; TA = TJ = TMIN to TMAX (max) | 5 | ||
| Quiescent current, continuous conversion | 320 | 495 | µA | Continuous Conversion Mode, SMBus inactive; TA = TJ = TMIN to TMAX (max) | 5 | ||
| Quiescent current, shutdown, bus-idle timers on | 120 | 175 | µA | Shutdown, bus-idle timers on; TA = TJ = TMIN to TMAX (max) | 5 | ||
| Quiescent current, shutdown, bus-idle timers off | 1.9 | 8 | µA | Shutdown, bus-idle timers off; TA = TJ = TMIN to TMAX (max) | 5 | ||
| Logical 1 input current (SMBDAT, SMBCLK) | IIH | 0.01 | 2 | µA | VIN = VDD; TA = TJ = TMIN to TMAX (max) | 6 | |
| Logical 0 input current (SMBDAT, SMBCLK) | IIL | -2 | -0.01 | µA | VIN = 0 V; TA = TJ = TMIN to TMAX (min) | 6 | |
| High level output current (SMBDAT, ALERT) | IOH | 0.01 | 2 | µA | VOH = VDD; TA = TJ = TMIN to TMAX (max) | 6 | |
| SMBus low level output voltage | VOL | 0.4 | V | IOL = 3 mA; TA = TJ = TMIN to TMAX | 6 | ||
| Address pin low input voltage | VIL;ADDR | 0.1 | V | TA = TJ = TMIN to TMAX | 6 | ||
| Address pin high input current | IIH;ADDR | 0.01 | 2 | µA | VIN = VDD; TA = TJ = TMIN to TMAX (max) | 6 | |
| Address pin low input current | IIL;ADDR | -2 | -0.01 | µA | VIN = 0 V; TA = TJ = TMIN to TMAX (min) | 6 | |
| SMBus clock frequency | fSMB | 400 | kHz | TA = TJ = TMIN to TMAX; CL = 400 pF | 7 | ||
| SMBus clock low time | tLOW | 300 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| SMBus clock high time | tHIGH | 300 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Output fall time | tF;SMB | 250 | ns | CL = 400 pF; IPULL-UP ≤ 3 mA; TA = TJ = TMIN to TMAX | 7 | ||
| Time-out for reset of serial interface | tTIMEOUT | 15 | 45 | ms | TA = TJ = TMIN to TMAX | 7 | |
| Data in setup time to SMBCLK high | tSU;DAT | 100 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Data in hold time after SMBCLK low | tHD;DATI | 0 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Data out hold time after SMBCLK low | tHD;DATO | 30 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Start condition hold time | tHD;STA | 60 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Stop condition setup time | tSU;STO | 50 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Repeated start condition setup time | tSU;STA | 50 | ns | TA = TJ = TMIN to TMAX | 7 | ||
| Bus free time between stop and start | tBUF | 1.2 | µs | TA = TJ = TMIN to TMAX | 7 | ||
| Power-on reset time | tPOR | 1 | ms | TA = TJ = TMIN to TMAX | 7 |
CAD (KiCad official)
- Symbol:
LM73CIMKX-0 - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
lm73cimkx-0-etched.step/lm73cimkx-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm73cimkx-0.step/lm73cimkx-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
17403337eae090f5, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM73CIMKX-0
**Texas Instruments** · Temperature Sensors · TSOT-23-6L
LM73CIMKX-0 from Texas Instruments, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADDR | input | Address select input: one of three device addresses is selected by connecting this three-level CMOS input to ground, leaving it floating, or connecting it to VDD. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | VDD | power_in | Power supply input; the recommended operating supply range is 2.7 V to 5.5 V. |
| 4 | SMBCLK | input | SMBus serial clock input that operates up to 400 kHz and is low-pass filtered. |
| 5 | ALERT | output | Open-drain digital output that goes active whenever the measured temperature exceeds a programmable temperature limit. |
| 6 | SMBDAT | bidirectional | SMBus bidirectional open-drain serial data line, synchronous to SMBCLK and low-pass filtered. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6L |
| Category | Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range (VDD) | VDD | 2.7 | | 5.5 | V | Over operating free-air temperature range | 4 |
| Operating free-air temperature range | | -40 | | 150 | °C | LM73CIMK-0 | 4 |
| Supply Voltage | | -0.3 | | 6 | V | Over operating free-air temperature range | 4 |
| Voltage at SMBCLK and SMBDAT pins | | -0.3 | | 6 | V | | 4 |
| Voltage at All Other Pins | | -0.3 | | 6 | V | | 4 |
| Input Current at Any Pin | | -5 | | 5 | mA | Printed as ±5 mA | 4 |
| Storage Temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 224 | | °C/W | DDC (SOT) 6-pin package; single value printed, no min/max | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 89 | | °C/W | DDC (SOT) 6-pin package; single value printed, no min/max | 4 |
| Temperature accuracy | | -1 | | 1 | °C | VDD = 2.7V to 4.5V; TA = TJ = TMIN to TMAX; TA = -10°C to 80°C | 5 |
| Temperature accuracy | | -1.5 | | 1.5 | °C | VDD = 2.7V to 4.5V; TA = TJ = TMIN to TMAX; TA = -25°C to 115°C | 5 |
| Temperature accuracy | | -2 | | 2 | °C | VDD = 2.7V to 4.5V; TA = TJ = TMIN to TMAX; TA = -40°C to 150°C | 5 |
| Temperature accuracy | | -2.5 | | 2.5 | °C | VDD = 5.5V; TA = TJ = TMIN to TMAX; TA = -40°C to 150°C | 5 |
| Temperature conversion time, 11-bit | | | 10.1 | 14 | ms | RES1 Bit = 0, RES0 Bit = 0; TA = TJ = TMIN to TMAX (max) | 5 |
| Temperature conversion time, 12-bit | | | 20.2 | 28 | ms | RES1 Bit = 0, RES0 Bit = 1; TA = TJ = TMIN to TMAX (max) | 5 |
| Temperature conversion time, 13-bit | | | 40.4 | 56 | ms | RES1 Bit = 1, RES0 Bit = 0; TA = TJ = TMIN to TMAX (max) | 5 |
| Temperature conversion time, 14-bit | | | 80.8 | 112 | ms | RES1 Bit = 1, RES0 Bit = 1; TA = TJ = TMIN to TMAX (max) | 5 |
| Quiescent current, continuous conversion | | | 320 | 495 | µA | Continuous Conversion Mode, SMBus inactive; TA = TJ = TMIN to TMAX (max) | 5 |
| Quiescent current, shutdown, bus-idle timers on | | | 120 | 175 | µA | Shutdown, bus-idle timers on; TA = TJ = TMIN to TMAX (max) | 5 |
| Quiescent current, shutdown, bus-idle timers off | | | 1.9 | 8 | µA | Shutdown, bus-idle timers off; TA = TJ = TMIN to TMAX (max) | 5 |
| Logical 1 input current (SMBDAT, SMBCLK) | IIH | | 0.01 | 2 | µA | VIN = VDD; TA = TJ = TMIN to TMAX (max) | 6 |
| Logical 0 input current (SMBDAT, SMBCLK) | IIL | -2 | -0.01 | | µA | VIN = 0 V; TA = TJ = TMIN to TMAX (min) | 6 |
| High level output current (SMBDAT, ALERT) | IOH | | 0.01 | 2 | µA | VOH = VDD; TA = TJ = TMIN to TMAX (max) | 6 |
| SMBus low level output voltage | VOL | | | 0.4 | V | IOL = 3 mA; TA = TJ = TMIN to TMAX | 6 |
| Address pin low input voltage | VIL;ADDR | | | 0.1 | V | TA = TJ = TMIN to TMAX | 6 |
| Address pin high input current | IIH;ADDR | | 0.01 | 2 | µA | VIN = VDD; TA = TJ = TMIN to TMAX (max) | 6 |
| Address pin low input current | IIL;ADDR | -2 | -0.01 | | µA | VIN = 0 V; TA = TJ = TMIN to TMAX (min) | 6 |
| SMBus clock frequency | fSMB | | | 400 | kHz | TA = TJ = TMIN to TMAX; CL = 400 pF | 7 |
| SMBus clock low time | tLOW | 300 | | | ns | TA = TJ = TMIN to TMAX | 7 |
| SMBus clock high time | tHIGH | 300 | | | ns | TA = TJ = TMIN to TMAX | 7 |
| Output fall time | tF;SMB | | | 250 | ns | CL = 400 pF; IPULL-UP ≤ 3 mA; TA = TJ = TMIN to TMAX | 7 |
| Time-out for reset of serial interface | tTIMEOUT | 15 | | 45 | ms | TA = TJ = TMIN to TMAX | 7 |
| Data in setup time to SMBCLK high | tSU;DAT | 100 | | | ns | TA = TJ = TMIN to TMAX | 7 |
| Data in hold time after SMBCLK low | tHD;DATI | 0 | | | ns | TA = TJ = TMIN to TMAX | 7 |
| Data out hold time after SMBCLK low | tHD;DATO | 30 | | | ns | TA = TJ = TMIN to TMAX | 7 |
| Start condition hold time | tHD;STA | 60 | | | ns | TA = TJ = TMIN to TMAX | 7 |
| Stop condition setup time | tSU;STO | 50 | | | ns | TA = TJ = TMIN to TMAX | 7 |
| Repeated start condition setup time | tSU;STA | 50 | | | ns | TA = TJ = TMIN to TMAX | 7 |
| Bus free time between stop and start | tBUF | 1.2 | | | µs | TA = TJ = TMIN to TMAX | 7 |
| Power-on reset time | tPOR | | | 1 | ms | TA = TJ = TMIN to TMAX | 7 |
## CAD (KiCad official)
- Symbol: `LM73CIMKX-0`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files: `lm73cimkx-0-etched.step` / `lm73cimkx-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm73cimkx-0.step` / `lm73cimkx-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm73) (31 pp, sha256 `17403337eae090f5`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm73cimkx-0-datasheet.pdf)