main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm7321mf: viewers rendered from the public page · Ray
lm7321mf-etched.glb Publish 0.1.0 · Ray
lm7321mf-etched.step lm7321mf: factory component page (tier=mfr) · Ray
lm7321mf-hero.glb lm7321mf: hero GLB from the etched model (keeps the MPN mark) · Ray
lm7321mf-hero.overlay.json Publish 0.1.0 · Ray
lm7321mf.glb Publish 0.1.0 · Ray
lm7321mf.kicad_mod Publish 0.1.0 · Ray
lm7321mf.kicad_sym Publish 0.1.0 · Ray
lm7321mf.lbr Publish 0.1.0 · Ray
lm7321mf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

LM7321MF

Texas Instruments · Precision Op Amps · SOT-23-5

LM7321MF from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output; typical output current is ±125mA at VS = 32V, and a short to ground or a supply can be tolerated only momentarily, since longer shorts can push the junction past its absolute maximum rating, especially at higher supply voltage.
2 V- power_in Negative supply rail; total supply VS = (V+) - (V-) must be within the recommended 2.7V to 32V range (absolute maximum 33V).
3 +IN input Non-inverting input; common-mode voltage must stay between (V-) - 0.1V and (V+) + 0.1V, and input current must be limited to 10mA or less if the input can swing more than 0.5V beyond the supply rails.
4 -IN input Inverting input; common-mode voltage must stay between (V-) - 0.1V and (V+) + 0.1V, and input current must be limited to 10mA or less if the input can swing more than 0.5V beyond the supply rails.
5 V+ power_in Positive supply rail; total supply VS = (V+) - (V-) must be within the recommended 2.7V to 32V range (absolute maximum 33V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -5 0.35 5 mV VCM = V− 5
Input Offset Voltage over temperature VOS -6 6 mV TA = -40°C to +125°C 5
Input Bias Current IB -2 0.4 1 µA 5
Input Bias Current over temperature IB -2.5 1.5 µA TA = -40°C to +125°C 5
Input Offset Current IOS 7 200 nA 5
Input Offset Current over temperature IOS 300 nA TA = -40°C to +125°C 5
Common-Mode Rejection Ratio CMRR 109 125 dB VS = 32V, V- < VCM < (V+), 2V (Main Input Pair), TA = -40°C to 125°C 5
Common-Mode Rejection Ratio CMRR 93 111 dB VS = 5V, V- < VCM < (V+), 2V (Main Input Pair), TA = -40°C to 125°C 5
Common-Mode Rejection Ratio CMRR 114 dB VS = 2.7V, V- < VCM < (V+), 2V (Main Input Pair), TA = -40°C to 125°C 5
Common-Mode Rejection Ratio (aux input pair) CMRR 77 dB VS = 2.7, 32V, (V+), 1V < VCM < V+, TA = -40°C to 125°C 5
Power Supply Rejection Ratio PSRR 78 104 dB VCM = V-, VS = 5V to 32V, TA = -40°C to 125°C 5
Power Supply Rejection Ratio PSRR 74 dB VCM = V-, VS = 2.7V to 32V, TA = -40°C to 125°C 5
Open-Loop Voltage Gain AVOL 75 87 dB VS = 32V, VCM = VS / 2, (V-) + 1V < VO < (V+), 1V 5
Open-Loop Voltage Gain AVOL 70 87 dB VS = 32V, TA = -40°C to 125°C 5
Open-Loop Voltage Gain AVOL 74 80 dB VS = 5V, VCM = VS / 2, (V-) + 1V < VO < (V+), 1V 5
Open-Loop Voltage Gain AVOL 70 80 dB VS = 5V, TA = -40°C to 125°C 5
Open-Loop Voltage Gain AVOL 65 80 dB VS = 2.7V, VCM = VS / 2, (V-) + 1V < VO < (V+), 1V 5
Open-Loop Voltage Gain AVOL 62 80 dB VS = 2.7V, TA = -40°C to 125°C 5
Output Voltage Swing High VOUT 50 150 mV VID = 100mV, from either rail 5
Output Voltage Swing High over temperature VOUT 160 mV VID = 100mV, TA = -40°C to +125°C 5
Output Voltage Swing High, RL = 2kΩ VOUT 50 250 mV RL = 2kΩ, VID = 100mV 5
Output Voltage Swing High, RL = 2kΩ over temperature VOUT 280 mV RL = 2kΩ, VID = 100mV, TA = -40°C to +125°C 5
Output Voltage Swing Low VOUT 50 120 mV VID = −100mV 5
Output Voltage Swing Low over temperature VOUT 150 mV VID = −100mV, TA = -40°C to +125°C 5
Output Voltage Swing Low, RL = 2kΩ VOUT 50 120 mV RL = 2kΩ, VID = −100mV 5
Output Voltage Swing Low, RL = 2kΩ over temperature VOUT 150 mV RL = 2kΩ, VID = −100mV, TA = -40°C to +125°C 5
Output Current IOUT -40 125 mA VS = 32V 5
Output Current IOUT -35 85 mA VS = 5V 5
Output Current over temperature IOUT -20 mA VS = 5V, TA = -40°C to +125°C 5
Output Current IOUT -30 60 mA VS = 2.7V 5
Supply Current per channel IS 1.35 1.93 mA 6
Supply Current per channel over temperature IS 2.23 mA TA = -40°C to +125°C 6
Supply voltage VS 0 33 V VS = (V+), (V-) 4
Differential input voltage -10 10 V 4
Input current (signal input pins) -10 10 mA Signal input pins 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VS 2.7 32 V VS = V+ − V− 4
Temperature range TA -40 125 °C 4
Junction-to-ambient thermal resistance (DBV, SOT-23 5-pin) RθJA 185.4 °C/W DBV (SOT) 5-pin package, soldered to PCB 4

CAD (KiCad official)

  • Symbol: LM7321MF
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm7321mf-etched.step / lm7321mf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm7321mf.step / lm7321mf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 cc322455abb33f7e, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF