main
Ray Initial commit: component/lm66100qdckrq1 c3c4976

LM66100QDCKRQ1

Texas Instruments · Power Distribution Switches · SC-70-6

LM66100QDCKRQ1 from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Device input; operating voltage range 1.5V to 5.5V with input protection against -6V absolute maximum reverse polarity.
2 GND power_in Device ground reference.
3 CE input Active-low chip enable; MOSFET disables when VCE exceeds VIN by 80 mV and enables when VCE is 250 mV below VIN; do not leave floating.
4 N/C unconnected Not internally connected; can be tied to GND or left floating.
5 ST tri_state Active-low open-drain status output; pulled low when chip is disabled and high-impedance when enabled; connect to GND if not required.
6 VOUT output Device output; supports maximum continuous current of 1.5A with on-resistance 79 mΩ at 5V VIN typical.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Power Management (PMIC)
Pins 6

CAD (KiCad official)

  • Symbol: LM66100QDCKRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: lm66100qdckrq1-etched.step / lm66100qdckrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm66100qdckrq1.step / lm66100qdckrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 b2911f6f4238d29b, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF