Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

LM6211MFX

Texas Instruments · Operational Amplifier · SOT-23-5

LM6211MFX from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Rail-to-rail output of the op amp, short-circuit protected with typical 25 mA source / 38 mA sink limit at 24V supply.
2 V- power_in Negative supply, tied to ground (0V) in single-supply operation.
3 IN+ input Non-inverting input of the ground-sensing CMOS input stage, with typical input bias current of 2 pA at 24V.
4 IN- input Inverting input of the CMOS input stage; differential input should not exceed ±0.3V while the output drives short-circuit currents.
5 V+ power_in Positive supply, operating range 5V to 24V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

CAD (KiCad official)

  • Symbol: LM6211MFX
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lm6211mfx-etched.step / lm6211mfx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm6211mfx.step / lm6211mfx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 ffb3e3d4ab2d5ab5, retrieved 2026-10-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF