main
History Download
Ray lm6172imx: laser-etched CAD + chip hero (factory 2.0.0 backfill) 6a100ec

LM6172IMX

Texas Instruments · Operational Amplifier · SOIC-8

LM6172IMX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT A output Output of amplifier A. Drives up to 50mA continuous output current; output swings to within ~1.8V of the supply rails with a 1kOhm load at +/-15V.
2 INVERTING INPUT A input Inverting (-) input of amplifier A. Voltage feedback topology; typical input bias current 1.2uA, input offset current 0.02uA.
3 NON-INVERTING INPUT A input Non-inverting (+) input of amplifier A. Common-mode input range typically +/-13.5V on +/-15V supplies; differential input voltage limited to +/-10V.
4 V- power_in Negative supply rail. Total supply voltage (V+ - V-) must be within 5.5V to 36V (absolute max 36V). Typically -15V or -5V.
5 NON-INVERTING INPUT B input Non-inverting (+) input of amplifier B. Common-mode input range typically +/-13.5V on +/-15V supplies; differential input voltage limited to +/-10V.
6 INVERTING INPUT B input Inverting (-) input of amplifier B. Voltage feedback topology; typical input bias current 1.2uA, input offset current 0.02uA.
7 OUTPUT B output Output of amplifier B. Drives up to 50mA continuous output current; output swings to within ~1.8V of the supply rails with a 1kOhm load at +/-15V.
8 V+ power_in Positive supply rail. Total supply voltage (V+ - V-) must be within 5.5V to 36V (absolute max 36V). Typically +15V or +5V. Total supply current 4.6mA typical for both amplifiers.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM6172IMX
  • LM6172IMXIN

CAD (KiCad official)

  • Symbol: LM6172IMX
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm6172imx-etched.step / lm6172imx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm6172imx.step / lm6172imx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 60ee921c93bc6d5b, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF