3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM56CIMX
Texas Instruments · Temperature Sensors · SOP-8
LM56CIMX from Texas Instruments, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF | power_in | 1.250V bandgap voltage reference output, which should source a 50 µA load to maintain trip point accuracy. |
| 2 | VT2 | input | Input for the temperature trip point voltage for OUT2, with an analog input range of GND to V+ − 1 V. |
| 3 | VT1 | input | Input for the temperature trip point voltage for OUT1, with an analog input range of GND to V+ − 1 V. |
| 4 | GND | power_in | Ground pin. |
| 5 | VTEMP | output | Temperature sensor output of +6.20 mV/°C x T + 395 mV with a maximum output impedance of 1500 Ω. |
| 6 | OUT2 | output | Active-LOW open-collector digital output that goes LOW above the T2 set point and HIGH below T2 − 5°C, with a maximum of +10V on the output and not intended to directly drive a fan motor. |
| 7 | OUT1 | output | Active-LOW open-collector digital output that goes LOW above T1 and HIGH below T1 − 5°C, with a maximum of +10V on the output and not intended to directly drive a fan motor. |
| 8 | V+ | power_in | Positive supply voltage pin, operating range +2.7V to +10V, to be bypassed with a 0.1 µF capacitor to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM56CIMX - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm56cimx-etched.step/lm56cimx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm56cimx.step/lm56cimx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
fdb1011900f32e64, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).