main
Ray Publish 0.1.1 dc3a624
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5576qmhx",
  "title": "LM5576QMHX",
  "brief": "Texas Instruments Global Sourcing Parts, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "global sourcing parts",
    "lm5576qmhx",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LM5576QMHX",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20-EP",
    "pin_count": 21,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/lm5576-q1.pdf",
    "parts": {
      "symbol": "lm5576qmhx.kicad_sym",
      "footprint": "lm5576qmhx.kicad_mod",
      "model_3d": "lm5576qmhx-hero.glb",
      "model_3d_plain": "lm5576qmhx.glb",
      "model_3d_step": "lm5576qmhx-etched.step",
      "model_3d_step_plain": "lm5576qmhx.step",
      "lbr": "lm5576qmhx.lbr"
    },
    "distributor_links": {
      "lcsc": "C202189"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:28:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_out",
        "description": "Regulated 7V output from internal bias regulator with 25mA max current; tracks VIN when below 9V, regulated to 7V when VIN exceeds 9V."
      },
      {
        "number": "2",
        "name": "SD",
        "type": "input",
        "description": "Shutdown/UVLO input with dual thresholds: below 0.7V enters low power mode, 0.7V to 1.225V is standby mode, above 1.225V enables normal operation; 5µA internal pull-up."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input power supply voltage with rated operating range from 6V to 75V."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "Input power supply voltage with rated operating range from 6V to 75V."
      },
      {
        "number": "5",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Oscillator synchronization input/output allowing internal oscillator to sync with external clock or multiple device SYNC pins connected together."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output for external loop compensation network connection (typically type-II filter) to FB pin."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to error amplifier inverting input with 1.225V regulation threshold and 10nA input bias current."
      },
      {
        "number": "8",
        "name": "RT",
        "type": "input",
        "description": "Oscillator frequency setting input; external resistor between this pin and AGND sets switching frequency from 50kHz to 500kHz."
      },
      {
        "number": "9",
        "name": "RAMP",
        "type": "output",
        "description": "Current ramp generator output; external capacitor (50pF to 2000pF) connected between this pin and AGND sets ramp slope for current-mode control."
      },
      {
        "number": "10",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference for internal control circuit bias functions and precision reference."
      },
      {
        "number": "11",
        "name": "SS",
        "type": "output",
        "description": "Soft start output with 10µA internal charging current; external capacitor sets error amplifier reference rise time constant, pulled low during standby and thermal shutdown."
      },
      {
        "number": "12",
        "name": "OUT",
        "type": "output",
        "description": "Output voltage node directly connected to regulated output voltage for feedback network."
      },
      {
        "number": "13",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground reference for pre-switch driver and current sense resistor low-side reference."
      },
      {
        "number": "14",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground reference for pre-switch driver and current sense resistor low-side reference."
      },
      {
        "number": "15",
        "name": "IS",
        "type": "input",
        "description": "Current sense input measuring recirculation diode current through internal 42mΩ sense resistor; sample-hold at end of off-time provides 0.5V/A proportional DC level."
      },
      {
        "number": "16",
        "name": "IS",
        "type": "input",
        "description": "Current sense input measuring recirculation diode current through internal 42mΩ sense resistor; sample-hold at end of off-time provides 0.5V/A proportional DC level."
      },
      {
        "number": "17",
        "name": "SW",
        "type": "output",
        "description": "Switch node output from internal 75V/170mΩ N-channel buck MOSFET source terminal; must connect to Schottky diode and buck inductor."
      },
      {
        "number": "18",
        "name": "SW",
        "type": "output",
        "description": "Switch node output from internal 75V/170mΩ N-channel buck MOSFET source terminal; must connect to Schottky diode and buck inductor."
      },
      {
        "number": "19",
        "name": "PRE",
        "type": "output",
        "description": "Open-drain precharge assist output for bootstrap capacitor; internal MOSFET conducts 265ns per cycle to charge BST capacitor during light load or pre-charge applications."
      },
      {
        "number": "20",
        "name": "BST",
        "type": "input",
        "description": "Bootstrap input for high-side gate driver; external 0.022µF ceramic capacitor required between BST and SW pins, charges from VCC during buck switch off-time."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 38,
        "cost_usd": 0.2808,
        "at": "2026-10-01T17:27:56"
      },
      "datasheet": {
        "url": "https://www.ti.com.cn/cn/lit/ds/symlink/lm5576-q1.pdf",
        "pages": 38,
        "sha256": "805d7577975dee6d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5576qmhx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b294db4fe41a72ddb017475f27c59350da537fd94d3c10582f446cb827c67ab0",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5576qmhx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "998d9595102a87efbf0702b3c86592e145e7495c8bfdc1c70fe4e9bec2b3033f",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-20-EP",
      "Category": "Global Sourcing Parts",
      "Pins": "21"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5576qmhx"
  ],
  "discovery_pitch": "LM5576QMHX (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5576qmhx.kicad_sym",
    "lm5576qmhx.kicad_mod",
    "lm5576qmhx.glb",
    "lm5576qmhx.step",
    "lm5576qmhx.lbr",
    "docs/hero.png",
    "docs/lm5576qmhx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5576qmhx-etched.step",
    "lm5576qmhx-hero.glb",
    "lm5576qmhx-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Texas Instruments Global Sourcing Parts, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}