← Commit history

lm5576mh: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·1f78da2311 · ·parent 21ceda5
2 files changed +91−11
package.json+49−9
@@ -69,13 +69,13 @@         "number": "1",         "name": "VCC",         "type": "power_out",-        "description": "Bias regulator output nominally regulated to 7.15V (range 6.85V to 7.45V) requiring 0.1\u00b5F to 1\u00b5F ceramic decoupling capacitor; external supply voltage 7.5V to 14V optional to reduce IC power dissipation."+        "description": "Bias regulator output nominally regulated to 7.15V (range 6.85V to 7.45V) requiring 0.1µF to 1µF ceramic decoupling capacitor; external supply voltage 7.5V to 14V optional to reduce IC power dissipation."       },       {         "number": "2",         "name": "SD",         "type": "input",-        "description": "Shutdown/UVLO input enabling low-power mode for voltages >0.7V, standby mode 0.7V to 1.225V, and normal operation >1.225V, with internal 5\u00b5A pullup enabling full operation if pin left open."+        "description": "Shutdown/UVLO input enabling low-power mode for voltages >0.7V, standby mode 0.7V to 1.225V, and normal operation >1.225V, with internal 5µA pullup enabling full operation if pin left open."       },       {         "number": "3",@@ -105,7 +105,7 @@         "number": "7",         "name": "FB",         "type": "input",-        "description": "Feedback input to error amplifier inverting input with 1.225V regulation threshold; output voltage set by external resistor divider as VOUT = 1.225V \u00d7 (1 + R5/R6)."+        "description": "Feedback input to error amplifier inverting input with 1.225V regulation threshold; output voltage set by external resistor divider as VOUT = 1.225V × (1 + R5/R6)."       },       {         "number": "8",@@ -129,13 +129,13 @@         "number": "11",         "name": "SS",         "type": "output",-        "description": "Soft start output pin with internal 10\u00b5A current source charging external capacitor to set error amplifier ramp time; held low during standby, VCC UVLO, and thermal shutdown."+        "description": "Soft start output pin with internal 10µA current source charging external capacitor to set error amplifier ramp time; held low during standby, VCC UVLO, and thermal shutdown."       },       {         "number": "12",         "name": "OUT",         "type": "power_out",-        "description": "Regulated output voltage connection directly to regulated output power with nominal voltage set by external resistor network as VOUT = 1.225V \u00d7 (1 + R5/R6)."+        "description": "Regulated output voltage connection directly to regulated output power with nominal voltage set by external resistor network as VOUT = 1.225V × (1 + R5/R6)."       },       {         "number": "13",@@ -165,7 +165,7 @@         "number": "17",         "name": "SW",         "type": "output",-        "description": "Switch node output serving as source terminal of internal 75V, 170m\u03a9 N-channel buck MOSFET connecting to external Schottky diode cathode and buck inductor."+        "description": "Switch node output serving as source terminal of internal 75V, 170mΩ N-channel buck MOSFET connecting to external Schottky diode cathode and buck inductor."       },       {         "number": "18",@@ -183,7 +183,7 @@         "number": "20",         "name": "BST",         "type": "input",-        "description": "Bootstrap input where external ceramic capacitor (0.022\u00b5F recommended) between BST and SW pins charges from VCC through internal diode during buck switch off-time for gate driver supply."+        "description": "Bootstrap input where external ceramic capacitor (0.022µF recommended) between BST and SW pins charges from VCC through internal diode during buck switch off-time for gate driver supply."       },       {         "number": "21",@@ -224,6 +224,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm5576mh.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "73a43a4a23852a0d895f90ec3f049709f72b6f67110c7c2cd863233b7aa2def4",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm5576mh-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b063f4aee09d8e29ac488b56676dcee5583e59642a1a863bb61a2be01a5e27eb",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -207,7 +207,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lm5576mh.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "73a43a4a23852a0d895f90ec3f049709f72b6f67110c7c2cd863233b7aa2def4",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm5576mh-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.41,+          6.5,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b063f4aee09d8e29ac488b56676dcee5583e59642a1a863bb61a2be01a5e27eb",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -254,4 +294,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}