main
Ray lm5575mhx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 116070f
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5575mhx",
  "title": "LM5575MHX",
  "brief": "Texas Instruments DC-DC Converters, HTSSOP-16-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "lm5575mhx"
  ],
  "component": {
    "mpn": "LM5575MHX",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-16-EP",
    "pin_count": 17,
    "category": "PMIC",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/7ca286cf2ff6af335f88c2228f83b4ee.pdf",
    "parts": {
      "symbol": "lm5575mhx.kicad_sym",
      "footprint": "lm5575mhx.kicad_mod",
      "model_3d": "lm5575mhx-etched.glb",
      "model_3d_plain": "lm5575mhx.glb",
      "model_3d_step": "lm5575mhx-etched.step",
      "model_3d_step_plain": "lm5575mhx.step",
      "lbr": "lm5575mhx.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_out",
        "description": "Bias regulator output. VCC tracks VIN up to ~9V then regulates to ~7V. Requires 0.1 µF to 1 µF ceramic decoupling capacitor. Can be back-fed from an external 7.5-14V rail to reduce internal power dissipation."
      },
      {
        "number": "2",
        "name": "SD",
        "type": "input",
        "description": "Shutdown / UVLO input. Below 0.7V the regulator is in low-power shutdown; 0.7V-1.225V puts the part in standby; above 1.225V enables normal operation. Internally pulled up by ~5 µA current source."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage. Nominal operating range 6V to 75V."
      },
      {
        "number": "4",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Oscillator synchronization input or output. Can be driven by an external clock or by another LM5575 for master/slave synchronization of multiple devices."
      },
      {
        "number": "5",
        "name": "COMP",
        "type": "output",
        "description": "Internal error amplifier output. Loop-compensation network connects between COMP and FB."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback input from the regulated output. Connected to the inverting input of the internal error amplifier; regulation threshold is 1.225V."
      },
      {
        "number": "7",
        "name": "RT",
        "type": "input",
        "description": "Internal oscillator frequency-set input. An external resistor from RT to AGND programs the switching frequency (50 kHz to 500 kHz)."
      },
      {
        "number": "8",
        "name": "RAMP",
        "type": "input",
        "description": "Ramp-control signal for emulated current-mode control. External capacitor from RAMP to AGND sets the current-sense ramp slope; recommended 50 pF to 2000 pF."
      },
      {
        "number": "9",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground. Internal reference return for the regulator control circuitry."
      },
      {
        "number": "10",
        "name": "SS",
        "type": "input",
        "description": "Soft-start. An external capacitor with an internal 10 µA current source sets the error amplifier reference ramp-up time. Held low during standby, VCC UVLO, and thermal shutdown."
      },
      {
        "number": "11",
        "name": "OUT",
        "type": "input",
        "description": "Output-voltage sense/connection. Connects directly to the regulator output voltage."
      },
      {
        "number": "12",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground. Low-side return for the PRE switch and the IS current-sense resistor."
      },
      {
        "number": "13",
        "name": "IS",
        "type": "input",
        "description": "Current-sense input for the recirculating (freewheel) diode current. An internal sense resistor and sample/hold measures diode current at end of the off-time to provide the emulated current-mode ramp DC level."
      },
      {
        "number": "14",
        "name": "SW",
        "type": "power_out",
        "description": "Switch node. Source terminal of the internal buck switch; connects to the external Schottky freewheel diode and the buck inductor."
      },
      {
        "number": "15",
        "name": "PRE",
        "type": "output",
        "description": "Auxiliary bootstrap-capacitor pre-charge output. Open-drain output connected to SW for pre-charging the bootstrap capacitor at very light loads or prior to enable. Internal pre-charge MOSFET turns on ~250 ns before each buck switch on-time."
      },
      {
        "number": "16",
        "name": "BST",
        "type": "power_in",
        "description": "Bootstrap-capacitor boost input. External 0.022 µF ceramic capacitor between BST and SW; charged from VCC through an internal diode during the buck switch off-time."
      },
      {
        "number": "EP",
        "name": "EP",
        "type": "passive",
        "description": "Exposed thermal pad on the underside of the package. Recommended to connect to the PCB ground plane for improved thermal dissipation."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/7ca286cf2ff6af335f88c2228f83b4ee.pdf",
        "pages": 24,
        "sha256": "3b7d52abfb20c293",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5575mhx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5575mhx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "26cf70aa4685c1691d3467cbcb1c7272f3a7224527052465b2d0984845d66399",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-16-EP",
      "Category": "PMIC",
      "Pins": "17"
    }
  },
  "variants": [
    {
      "mpn": "LM5575MHX",
      "kind": "packaging"
    },
    {
      "mpn": "LM5575MHXQMH",
      "kind": "packaging"
    },
    {
      "mpn": "LM5575MHXQMHX",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5575mhx"
  ],
  "discovery_pitch": "LM5575MHX (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5575mhx.kicad_sym",
    "lm5575mhx.kicad_mod",
    "lm5575mhx.glb",
    "lm5575mhx.step",
    "lm5575mhx.lbr",
    "docs/hero.png",
    "docs/lm5575mhx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T17:04:23.372Z"
}