main
Ray lm5574mtx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) c3fd6e4
{
  "slug": "lm5574mtx",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "lm5574mtx"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5574mtx.kicad_sym",
    "lm5574mtx.kicad_mod",
    "lm5574mtx.glb",
    "lm5574mtx.step",
    "lm5574mtx.lbr",
    "docs/hero.png",
    "docs/lm5574mtx-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5574mtx-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "LM5574MTX",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5574mtx.pdf",
    "parts": {
      "symbol": "lm5574mtx.kicad_sym",
      "footprint": "lm5574mtx.kicad_mod",
      "model_3d": "lm5574mtx-etched.glb",
      "model_3d_plain": "lm5574mtx.glb",
      "model_3d_step": "lm5574mtx-etched.step",
      "model_3d_step_plain": "lm5574mtx.step",
      "lbr": "lm5574mtx.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_out",
        "description": "Output of the internal bias regulator. Vcc tracks Vin up to 9V; above 9V it is regulated to ~7V. Requires a 0.1µF-1µF ceramic decoupling capacitor. An external 7.5V-14V supply may be applied here to reduce internal power dissipation."
      },
      {
        "number": "2",
        "name": "SD",
        "type": "input",
        "description": "Shutdown / UVLO input. VSD < 0.7V = low-power shutdown; 0.7V-1.225V = standby; > 1.225V = operational. A resistor divider from VIN sets a line-UVLO threshold; if left open a 5µA internal pull-up enables the regulator."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage. Nominal operating range 6V to 75V (absolute maximum 76V)."
      },
      {
        "number": "4",
        "name": "SYNC",
        "type": "bidirectional",
        "description": "Oscillator synchronization input/output. Can be driven by an external clock through an external pull-down device, or tied between multiple LM5574 devices to self-synchronize. Source impedance ~11kΩ, sink impedance ~110Ω, falling threshold 1.3V, min pulse 15ns."
      },
      {
        "number": "5",
        "name": "COMP",
        "type": "output",
        "description": "Output of the internal transconductance error amplifier. Connect the loop-compensation network between this pin and FB. Sink/source capability ~3mA, unity-gain bandwidth ~3MHz."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback input to the internal error amplifier (inverting input). Regulation reference is 1.225V ±1.5%; bias current ~17nA."
      },
      {
        "number": "7",
        "name": "RT",
        "type": "input",
        "description": "Oscillator frequency-set input. A single resistor from RT to AGND programs the switching frequency between 50kHz and 500kHz (e.g. RT = 32.4kΩ → ~200kHz; RT = 11kΩ → ~485kHz)."
      },
      {
        "number": "8",
        "name": "RAMP",
        "type": "input",
        "description": "Ramp-control signal for the emulated current-mode PWM. An external capacitor (50pF-2000pF) from RAMP to AGND sets the emulated ramp slope."
      },
      {
        "number": "9",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground. Internal reference for the regulator control functions; return for RT and RAMP timing components."
      },
      {
        "number": "10",
        "name": "SS",
        "type": "input",
        "description": "Soft-start. An external capacitor and an internal 10µA current source set the rise time of the error-amp reference. Held low during standby, VCC UVLO, and thermal shutdown."
      },
      {
        "number": "11",
        "name": "OUT",
        "type": "input",
        "description": "Output-voltage sense connection. Connect directly to the regulated output voltage rail; used by the diode current-sense/emulated-ramp circuitry."
      },
      {
        "number": "12",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground. Low-side reference for the pre-charge (PRE) switch and for the internal IS current-sense resistor."
      },
      {
        "number": "13",
        "name": "IS",
        "type": "input",
        "description": "Current-sense input for the external re-circulating (Schottky) diode. An internal 250mΩ sense resistor and sample/hold measure diode current near the end of the off-time, providing the DC level of the emulated current ramp."
      },
      {
        "number": "14",
        "name": "SW",
        "type": "output",
        "description": "Switching node - source of the internal 75V/750mΩ N-channel buck MOSFET. Connect to the external Schottky recirculation diode and the buck inductor. Steady-state minimum rating -1.5V."
      },
      {
        "number": "15",
        "name": "PRE",
        "type": "output",
        "description": "Pre-charge assist for the bootstrap capacitor. Open-drain output (Rds(on) ~70Ω) that turns on for ~250ns each cycle just before the buck-switch on-time; usually tied to SW to keep BST charged under very light load or when the output is pre-charged before enable."
      },
      {
        "number": "16",
        "name": "BST",
        "type": "power_in",
        "description": "Bootstrap-capacitor input for the high-side gate drive. Connect a ~0.022µF ceramic capacitor between BST and SW; the cap is recharged from VCC through an internal diode during the buck-switch off-time. BOOST UVLO ~4V."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": "LM5574MTXTR-ND",
      "mouser": "926-LM5574MTX"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:04:50Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "LM5574MTXTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "926-LM5574MTX",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "lm5574mtx.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5574mtx-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ffe27af1f70bfaeb66668788389b3bb9bdecb40db8d6f22c417cfd161876e565",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}