Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | |
| viewers | |
| lm555m-etched.fit.json | |
| lm555m-etched.glb | |
| lm555m-etched.step | |
| lm555m.glb | |
| lm555m.kicad_mod | |
| lm555m.kicad_sym | |
| lm555m.lbr | |
| lm555m.step | |
| package.json | |
| page.json | |
| README.md |
LM555M
HGSEMI · Timers / Clock Oscillators · SOP-8
LM555M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground reference (0 V). |
| 2 | TRIGGER | input | Trigger input. A negative-going pulse below 1/3 VCC starts the timing cycle by setting the internal flip-flop. Typical trigger voltage 1.67 V at VCC=5 V, 5 V at VCC=15 V; trigger current ~0.5 µA. |
| 3 | OUTPUT | output | Push-pull output stage. Can source or sink up to 200 mA. Swings between ~VCC (high) and near GND (low); TTL compatible. Rise/fall times ~100 ns typical. |
| 4 | RESET | input | Active-low reset input. Forces the output low and discharges the timing capacitor regardless of the flip-flop state when pulled below ~0.7 V. Tie to VCC when unused. |
| 5 | CONTROL | input | Control voltage input. Access to the internal 2/3 VCC threshold reference divider; allows modulation of threshold and trigger levels. Typically bypassed to GND with a 10 nF capacitor. Nominal 3.33 V at VCC=5 V, 10 V at VCC=15 V. |
| 6 | THRESHOLD | input | Upper comparator input. When the voltage on this pin rises above 2/3 VCC, the internal flip-flop is reset, ending the timing cycle. Threshold current ~0.1 µA typical. |
| 7 | DISCHARGE | output | Open-collector discharge transistor. Provides a path to GND for the external timing capacitor when the output is low. Saturation voltage ~180 mV at 15 mA, sink capability rated up to ~200 mA. |
| 8 | VCC | power_in | Positive supply. Operating range 4.5 V to 16 V; absolute maximum 18 V. Supply current 3-10 mA typical depending on VCC and output state. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | RTC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM555MDLM555MN
CAD (KiCad official)
- Symbol:
LM555M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm555m-etched.step/lm555m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm555m.step/lm555m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (14 pp, sha256
cb7e362f10f402a6, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).