main
Ray
Publish 0.1.0
44111c3
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259
{
"slug": "lm536013qdsxrq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments DC-DC Converters, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lm536013qdsxrq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm536013qdsxrq1.kicad_sym",
"lm536013qdsxrq1.kicad_mod",
"lm536013qdsxrq1.glb",
"lm536013qdsxrq1.step",
"lm536013qdsxrq1.lbr",
"docs/hero.png",
"docs/lm536013qdsxrq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm536013qdsxrq1-hero.glb",
"lm536013qdsxrq1-hero.overlay.json"
],
"component": {
"mpn": "LM536013QDSXRQ1",
"manufacturer": "Texas Instruments",
"package": "WSON-10-EP(3x3)",
"pin_count": 11,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/lit/ds/symlink/lm536013qdsxrq1.pdf",
"parts": {
"symbol": "lm536013qdsxrq1.kicad_sym",
"footprint": "lm536013qdsxrq1.kicad_mod",
"model_3d": "lm536013qdsxrq1-hero.glb",
"model_3d_plain": "lm536013qdsxrq1.glb",
"model_3d_step": "lm536013qdsxrq1-etched.step",
"model_3d_step_plain": "lm536013qdsxrq1.step",
"lbr": "lm536013qdsxrq1.lbr"
},
"distributor_links": {
"lcsc": "C2073082",
"digikey": "296-LM536013QDSXRQ1TR-ND",
"mouser": "595-LM536013QDSXRQ1"
},
"distributor_check": {
"checked_at": "2026-11-12T20:06:04Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-LM536013QDSXRQ1TR-ND",
"status": "found"
},
"mouser": {
"pn": "595-LM536013QDSXRQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SW",
"type": "power_out",
"description": "Regulator switch node that connects to the output inductor; the absolute maximum SW to GND range is -0.3 V to VIN+0.3 V."
},
{
"number": "2",
"name": "BOOT",
"type": "input",
"description": "High-side gate driver upper supply rail that takes a 100-nF capacitor from SW to BOOT, which an internal diode charges while SW is low; the BOOT to SW absolute maximum is 3.6 V."
},
{
"number": "3",
"name": "VCC",
"type": "power_out",
"description": "Internal 3-V regulator output that supplies the internal control circuits; connect a high-quality 1.0-µF capacitor from this pin to AGND for the fixed versions."
},
{
"number": "4",
"name": "FB",
"type": "power_in",
"description": "In the fixed version, this pin is the output-voltage feedback and the power source for the VCC regulator, so it connects to the output node with a 10-nF bypass capacitor placed immediately adjacent; FB to GND is rated -0.3 V to 16 V for the 3.3-V version."
},
{
"number": "5",
"name": "AGND",
"type": "power_in",
"description": "Fixed-version ground to which the input signals and FB are compared."
},
{
"number": "6",
"name": "RESET",
"type": "output",
"description": "Open-drain reset output that needs a current-limiting pull-up to a suitable supply, reading high when the regulator is OK and low on a fault or when EN is low; RESET to GND is rated -0.3 V to 8 V with a maximum sink current of 8 mA."
},
{
"number": "7",
"name": "EN",
"type": "input",
"description": "Enable input where high turns the regulator on and low turns it off; it can be tied to VIN, must not float, and EN to GND is rated -0.3 V to 42 V."
},
{
"number": "8",
"name": "VIN",
"type": "power_in",
"description": "Input supply to the regulator, with input bypass capacitors connected directly between this pin and GND; VIN to GND is rated -0.3 V to 42 V absolute maximum and the recommended input range after startup is 3.8 V to 36 V."
},
{
"number": "9",
"name": "SYNC/MODE",
"type": "input",
"description": "Multifunction mode control input tolerant of voltages up to the input voltage: a valid sync clock forces PWM and synchronizes on its rising edge, tying it high forces PWM at the internal clock, and tying it low selects AUTO mode with diode emulation at light load; it must not float."
},
{
"number": "10",
"name": "GND",
"type": "power_in",
"description": "Power ground pin that must be bypassed to VIN immediately adjacent to this pin."
},
{
"number": "11",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The exposed pad is labeled 'DAP' in the pin table and figure, not given a numeric pin number; it is ; Pin 4 is FB for both fixed and adjustable versions but has a dual role in the fixed version (feedbac; The datasheet types RESET as 'O' with an open-drain output. KiCad has no open-drain class in this en"
],
"pages_sent": 9,
"cost_usd": 0.0042,
"at": "2026-11-12T20:05:52"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/lm536013qdsxrq1.pdf",
"pages": 51,
"sha256": "e5b0cd2ded2271f2",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "VQFN",
"height_mm": 0.75,
"height_basis": "datasheet A, midpoint of min and max",
"standoff_mm": 0.0
},
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm536013qdsxrq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.02,
3.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "cff600250478ff2632a687c152d57c2162e7db33c5f846800b981cb42f6548c8",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm536013qdsxrq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.02,
3.0,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "fe7a1f4db1e67f59adce63bf5e49ab3ef605d8f54d40177dfde3ed1e590dc0c8",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DSX0010A",
"source_page": 42,
"D": {
"nom_mm": 3.0,
"range_mm": [
2.95,
3.05
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
2.95,
3.05
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
0.7,
0.8
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lm536013qdsxrq1.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}