component
LM536003QDSXRQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203
{
"schema_version": 1,
"type": "component",
"slug": "lm536003qdsxrq1",
"title": "LM536003QDSXRQ1",
"brief": "Texas Instruments DC-DC Converters, WSON-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"power management (pmic)",
"lm536003qdsxrq1",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "LM536003QDSXRQ1",
"manufacturer": "Texas Instruments",
"package": "WSON-10-EP(3x3)",
"pin_count": 11,
"category": "Power Management (PMIC)",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm53601-q1",
"parts": {
"symbol": "lm536003qdsxrq1.kicad_sym",
"footprint": "lm536003qdsxrq1.kicad_mod",
"model_3d": "lm536003qdsxrq1-hero.glb",
"model_3d_plain": "lm536003qdsxrq1.glb",
"model_3d_step": "lm536003qdsxrq1-etched.step",
"model_3d_step_plain": "lm536003qdsxrq1.step",
"lbr": "lm536003qdsxrq1.lbr"
},
"distributor_links": {
"lcsc": 2072579,
"digikey": "LM536003QDSXRQ1-ND",
"mouser": "595-LM536003QDSXRQ1"
},
"distributor_check": {
"checked_at": "2026-10-03T03:39:49Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LM536003QDSXRQ1-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-LM536003QDSXRQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SW",
"type": "tri_state",
"description": "Regulator switch node connected to output inductor; driven high by high-side FET and pulled low by low-side FET."
},
{
"number": "2",
"name": "BOOT",
"type": "power_in",
"description": "High side gate driver upper supply rail; connect 100-nF capacitor from SW to BOOT; internal diode charges capacitor when SW node is low."
},
{
"number": "3",
"name": "VCC",
"type": "power_out",
"description": "Internal 3-V regulator output used as supply to internal control circuits; connect 1.0-μF high-quality capacitor from this pin to AGND."
},
{
"number": "4",
"name": "FB",
"type": "power_in",
"description": "Fixed version feedback pin for output voltage and power source for VCC regulator; connect to output node and place 10-nF bypass capacitor immediately adjacent."
},
{
"number": "5",
"name": "AGND",
"type": "power_in",
"description": "Fixed version signal and feedback ground to which input signals and FB are compared."
},
{
"number": "6",
"name": "RESET",
"type": "output",
"description": "Open drain reset output; high = regulator OK, low = regulator fault; goes low when EN pin is low; connect through current-limiting pull-up resistor to suitable voltage supply."
},
{
"number": "7",
"name": "EN",
"type": "input",
"description": "Enable input to regulator; high = on, low = off; can be connected to Vin; do not float."
},
{
"number": "8",
"name": "VIN",
"type": "power_in",
"description": "Input supply to regulator operating from 3.8V to 36V; connect input bypass capacitors directly between this pin and GND."
},
{
"number": "9",
"name": "SYNC/MODE",
"type": "input",
"description": "Multifunction mode control input tolerant of voltages up to input voltage; with valid synchronization signal enables forced PWM mode at external clock frequency; with high enforces PWM mode; with low enables AUTO mode with diode emulation at light load; do not float."
},
{
"number": "10",
"name": "GND",
"type": "power_in",
"description": "Power and signal ground connection; bypass to VIN immediately adjacent to this pin."
},
{
"number": "11",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"exposed pad 11 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 10,
"cost_usd": 0.177,
"at": "2026-10-03T03:39:21"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm53601-q1",
"pages": 51,
"sha256": "d174c97c59a34282",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
}
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "WSON-10-EP(3x3)",
"Category": "Power Management (PMIC)",
"Pins": "11"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lm536003qdsxrq1"
],
"discovery_pitch": "LM536003QDSXRQ1 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray",
"email": "[email protected]"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm536003qdsxrq1.kicad_sym",
"lm536003qdsxrq1.kicad_mod",
"lm536003qdsxrq1.glb",
"lm536003qdsxrq1.step",
"lm536003qdsxrq1.lbr",
"docs/hero.png",
"docs/lm536003qdsxrq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm536003qdsxrq1-hero.glb",
"lm536003qdsxrq1-hero.overlay.json"
],
"visibility": {
"public": true
}
}