main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm5176qpwptq1: viewers · Ray
lm5176qpwptq1-etched.glb Publish 0.1.0 · Ray
lm5176qpwptq1-etched.step lm5176qpwptq1: factory component page (tier=lcsc) · Ray
lm5176qpwptq1-hero.glb lm5176qpwptq1: hero GLB from the etched model (keeps the MPN mark) · Ray
lm5176qpwptq1-hero.overlay.json Publish 0.1.0 · Ray
lm5176qpwptq1.glb Publish 0.1.0 · Ray
lm5176qpwptq1.kicad_mod Publish 0.1.0 · Ray
lm5176qpwptq1.kicad_sym Publish 0.1.0 · Ray
lm5176qpwptq1.lbr Publish 0.1.0 · Ray
lm5176qpwptq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LM5176QPWPTQ1

Texas Instruments · DC-DC Controllers · HTSSOP-28-EP

LM5176QPWPTQ1 from Texas Instruments, in a HTSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN/UVLO input Enable pin: below 0.4 V the device is in low-current shutdown, and above 1.22 V the PWM function is enabled provided VCC exceeds the VCC UV threshold.
2 VIN power_in Input supply pin to the IC; connect to a supply voltage between 4.2 V and 55 V.
3 VISNS input VIN sense input; connect to the power stage input rail.
4 MODE input Hiccup mode select: 1.38 V to 2.22 V gives CCM with hiccup enabled (RMODE to AGND = 93.1 kΩ), 2.6 V to VCC gives CCM with hiccup disabled (200 kΩ or connect to VCC).
5 DITH passive A capacitor to AGND sets the dithering rate, modulating the oscillator frequency by 10% of the nominal RT frequency; grounding the pin disables dithering, and the voltage is ignored in external Sync mode.
6 RT/SYNC input Switching frequency programming pin: a resistor to AGND sets the switching frequency, and the pin can also synchronize the PWM controller to an external clock.
7 SLOPE passive A capacitor to AGND provides the slope compensation ramp for stable current mode operation in both buck and boost mode.
8 SS passive Soft-start programming pin; a capacitor between SS and AGND programs the soft-start time.
9 COMP output Error amplifier output; an external RC network between COMP and AGND compensates the feedback loop.
10 AGND power_in Analog ground of the IC.
11 FB input Feedback pin for output voltage regulation; connect a resistor divider from the converter output to this pin.
12 VOSNS input VOUT sense input; connect to the power stage output rail.
13 ISNS(-) input Current sense amplifier negative input; the constant-current loop regulates the drop across ISNS(+) and ISNS(-) to 50 mV, and shorting it to ISNS(+) disables the feature.
14 ISNS(+) input Current sense amplifier positive input; the constant-current loop regulates the drop across ISNS(+) and ISNS(-) to 50 mV, and shorting it to ISNS(-) disables the feature.
15 CSG input Negative or ground input to the PWM current sense amplifier; connect directly to the low-side (ground) of the current sense resistor.
16 CS input Positive input to the PWM current sense amplifier.
17 PGOOD output Power-good open-drain output, pulled low when FB is outside a -9%/+10% regulation window around the 0.8-V VREF.
18 SW2 passive Boost side switching node.
19 HDRV2 output High-side gate driver output; connect directly to the gate of the high-side MOSFET.
20 BOOT2 passive An external capacitor between BOOT2 and SW2 provides bias to the high-side MOSFET gate driver.
21 LDRV2 output Low-side gate driver output; connect directly to the gate of the low-side MOSFET.
22 PGND power_in Power ground of the IC; the high-current ground connection to the low-side gate drivers.
23 VCC power_out Output of the VCC bias regulator; connect a capacitor to ground.
24 BIAS power_in Optional input to the VCC bias regulator; for VBIAS > 8 V the VCC regulator draws power from BIAS, which can reduce power loss at high VIN.
25 LDRV1 output Low-side gate driver output; connect directly to the gate of the low-side MOSFET.
26 BOOT1 passive An external capacitor between BOOT1 and SW1 provides bias to the high-side MOSFET gate driver.
27 HDRV1 output High-side gate driver output; connect directly to the gate of the high-side MOSFET.
28 SW1 passive Buck side switching node.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-28-EP
Category Power Supply Chip
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN abs max VIN, EN/UVLO, VISNS, VOSNS, ISNS(+), ISNS(-) -0.3 60 V 5
BIAS abs max BIAS -0.3 40 V 5
FB, SS, DITH, RT/SYNC, SLOPE, COMP abs max -0.3 3.6 V 5
SW1, SW2 abs max SW1, SW2 -1 60 V 5
SW1, SW2 transient abs max SW1, SW2 -5 65 V 20 ns transient 5
VCC, MODE, PGOOD abs max -0.3 8.5 V 5
LDRV1, LDRV2 abs max -0.3 8.5 V 5
BOOT1/HDRV1 wrt SW1 abs max -0.3 8.5 V BOOT1, HDRV1 with respect to SW1 5
BOOT2/HDRV2 wrt SW2 abs max -0.3 8.5 V BOOT2, HDRV2 with respect to SW2 5
BOOT1, BOOT2 abs max -0.3 68 V 5
ISNS(+) wrt ISNS(-) abs max -0.3 0.3 V ISNS(+) with respect to ISNS(-) 5
CS, CSG abs max -0.3 0.3 V 5
Operating junction temperature abs max TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
ESD HBM V(ESD) -2000 2000 V HBM per AEC Q100-002 5
ESD CDM all pins V(ESD) -500 500 V CDM per AEC Q100-011, all pins 5
ESD CDM corner pins V(ESD) -750 750 V CDM, corner pins 5
Input bias voltage VIN 4.2 55 V 5
Input power stage voltage VISNS 2.5 55 V with external bias (BIAS ≥ 5 V or VIN ≥ 4.5 V) 5
Bias supply voltage range BIAS 8 36 V when VCC in regulation 5
Output voltage range VOSNS 0.8 55 V 5
Enable voltage range EN/UVLO 0 55 V 5
Average current sense common mode range ISNS(+), ISNS(-) 0 55 V 5
Operating temperature range TJ -40 150 °C 5
Operating frequency range Fsw 100 600 kHz 5
Junction-to-ambient thermal resistance RθJA 32.6 °C/W PWP (HTSSOP) 28 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 21.4 °C/W 6
Junction-to-board thermal resistance RθJB 8.2 °C/W 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 1 °C/W 6
VIN shutdown current IQ 2.6 10 µA VEN/UVLO = 0 V 6
VIN operating current IQ 2 4 mA VEN/UVLO = 2 V, VFB = 0.9 V 6
VCC regulation voltage VVCC(VIN) 6.95 7.35 7.88 V VBIAS = 0 V, VCC open 6
VCC undervoltage lockout VUV(VCC) 3.11 3.27 3.43 V VCC increasing 6
VCC regulator output impedance ROUT(VCC) 8 16 Ω IVCC = 30 mA, VIN = 4 V 6
BIAS switchover voltage VBIAS(SW) 7.25 8 8.75 V VIN = 24 V 6
Standby threshold VEN(STBY) 0.55 0.82 0.97 V EN/UVLO rising 6
Standby source current IEN(STBY) 1 2 3 µA VEN/UVLO = 1.1 V 6
Operating threshold VEN(OP) 1.17 1.22 1.29 V EN/UVLO rising 6
Operating hysteresis current ΔIHYS(OP) 2.15 3.15 4.25 µA VEN/UVLO = 1.5 V 6
Soft-start pull up current ISS 3.75 5 6.35 µA VSS = 0 V 6
Feedback reference voltage VREF 0.788 0.8 0.812 V FB = COMP 6
Switching Frequency 1 fSW(1) 175 200 225 kHz RT = 40 kΩ 6
Switching Frequency 2 fSW(2) 350 390 430 kHz RT = 20 kΩ 6
Buck current limit threshold (Valley) VCS(BUCK) 66 80 94 mV VIN = VVISNS = 24 V, VVOSNS = 12 V, VSLOPE = 0 V 7
Boost current limit threshold (Peak) VCS(BOOST) 100 120 140 mV VIN = VVISNS = 12 V, VVOSNS = 18 V, VSLOPE = 0 V 7
Average current loop regulation target VSNS 43 50 57 mV VISNS(-) = 24 V, sweep ISNS(+), VSS = 0.8 V 7
Buck adaptive slope current ISLOPE 24 30 35 µA VIN = VVISNS = 24 V, VVOSNS = 12 V, VSLOPE = 0 V 7
Boost adaptive slope current ISLOPE 13 17 21 µA VIN = VVISNS = 12 V, VVOSNS = 18 V, VSLOPE = 0 V 7
Source current out of MODE pin IMODE 17 20 23 µA 7
CCM with hiccup threshold VCCM_HIC 1.18 1.28 1.38 V 7
CCM no hiccup threshold VCCM 2.22 2.4 2.6 V 7
PGOOD sink current ISINK(PGD) 2 4.2 6.5 mA VPGOOD = 0.4 V 8
PGOOD leakage current ILEAK(PGD) 100 nA 8
Thermal shutdown temperature TSD 165 °C 8
Thermal shutdown hysteresis TSD(HYS) 15 °C 8

CAD (KiCad official)

  • Symbol: LM5176QPWPTQ1
  • Footprint: Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm
  • 3D model: HTSSOP-28-EP (KiCad packages3D, STEP)
  • 3D model files: lm5176qpwptq1-etched.step / lm5176qpwptq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5176qpwptq1.step / lm5176qpwptq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 8c9623c7002d7f57, retrieved 2026-10-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF