← Commit history
lm5175qpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+94−14
package.json+52−12@@ -86,13 +86,13 @@ "number": "4", "name": "MODE", "type": "input",- "description": "Mode selection input; sets CCM/DCM operation and enables/disables hiccup via RMODE resistor to GND (0\u03a9/49.9k\u03a9/93.1k\u03a9) or VCC."+ "description": "Mode selection input; sets CCM/DCM operation and enables/disables hiccup via RMODE resistor to GND (0Ω/49.9kΩ/93.1kΩ) or VCC." }, { "number": "5", "name": "DITH", "type": "input",- "description": "Frequency dithering control pin; capacitor to AGND modulates frequency \u00b15% at 10\u00b5A charge/discharge, ground to disable."+ "description": "Frequency dithering control pin; capacitor to AGND modulates frequency ±5% at 10µA charge/discharge, ground to disable." }, { "number": "6",@@ -110,13 +110,13 @@ "number": "8", "name": "SS", "type": "input",- "description": "Soft-start capacitor connection pin; capacitor to AGND programs startup time with 5\u00b5A pull-up current, clamped to 1.27V."+ "description": "Soft-start capacitor connection pin; capacitor to AGND programs startup time with 5µA pull-up current, clamped to 1.27V." }, { "number": "9", "name": "COMP", "type": "output",- "description": "Error amplifier output for external compensation network; 0.3-3V output range, 1.27M\u03a9 output impedance."+ "description": "Error amplifier output for external compensation network; 0.3-3V output range, 1.27MΩ output impedance." }, { "number": "10",@@ -128,7 +128,7 @@ "number": "11", "name": "FB", "type": "input",- "description": "Feedback input for output voltage regulation; referenced to 0.8V internal VREF, with \u00b110% PGOOD window."+ "description": "Feedback input for output voltage regulation; referenced to 0.8V internal VREF, with ±10% PGOOD window." }, { "number": "12",@@ -138,7 +138,7 @@ }, { "number": "13",- "name": "ISNS(\u2013)",+ "name": "ISNS(–)", "type": "input", "description": "Current sense amplifier negative input; forms 50mV regulation threshold with ISNS(+) for average current limiting." },@@ -164,13 +164,13 @@ "number": "17", "name": "PGOOD", "type": "output",- "description": "Open-drain power good output; pulled low when FB voltage outside \u00b110% window around 0.8V reference (-9%/+10% hysteresis)."+ "description": "Open-drain power good output; pulled low when FB voltage outside ±10% window around 0.8V reference (-9%/+10% hysteresis)." }, { "number": "18", "name": "SW2", "type": "output",- "description": "Boost-side switching node; high-voltage switching output (\u22121 to 60V, 65V transient) for power stage and BOOT2 bootstrap circuit."+ "description": "Boost-side switching node; high-voltage switching output (−1 to 60V, 65V transient) for power stage and BOOT2 bootstrap circuit." }, { "number": "19",@@ -200,7 +200,7 @@ "number": "23", "name": "VCC", "type": "power_out",- "description": "Regulated 7.5V output from internal bias regulator (6.95-7.88V); bypass with 1\u00b5F capacitor to PGND."+ "description": "Regulated 7.5V output from internal bias regulator (6.95-7.88V); bypass with 1µF capacitor to PGND." }, { "number": "24",@@ -230,7 +230,7 @@ "number": "28", "name": "SW1", "type": "output",- "description": "Buck-side switching node; high-voltage switching output (\u22121 to 60V, 65V transient) for power stage and BOOT1 bootstrap circuit."+ "description": "Buck-side switching node; high-voltage switching output (−1 to 60V, 65V transient) for power stage and BOOT1 bootstrap circuit." }, { "number": "29",@@ -275,6 +275,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm5175qpwprq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.2,+ 9.7,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm5175qpwprq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.2,+ 9.7,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f365f9e2a1fb092155517b0eb841d14f1c1260f9ddc56450181bcd9603c25c6d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -260,7 +260,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "lm5175qpwprq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.2,+ 9.7,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lm5175qpwprq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.2,+ 9.7,+ 1.05+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f365f9e2a1fb092155517b0eb841d14f1c1260f9ddc56450181bcd9603c25c6d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -307,4 +347,4 @@ "visibility": { "public": true }-}+}