main
Ray lm5175pwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) d24920c
{
  "schema_version": 1,
  "type": "component",
  "slug": "lm5175pwpr",
  "title": "LM5175PWPR",
  "brief": "Texas Instruments DC-DC Converters, HTSSOP-28. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "lm5175pwpr"
  ],
  "component": {
    "mpn": "LM5175PWPR",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-28",
    "pin_count": 29,
    "category": "PMIC",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm5175pwpr.pdf",
    "parts": {
      "symbol": "lm5175pwpr.kicad_sym",
      "footprint": "lm5175pwpr.kicad_mod",
      "model_3d": "lm5175pwpr-etched.glb",
      "model_3d_plain": "lm5175pwpr.glb",
      "model_3d_step": "lm5175pwpr-etched.step",
      "model_3d_step_plain": "lm5175pwpr.step",
      "lbr": "lm5175pwpr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Enable / undervoltage lockout input. EN/UVLO < 0.4 V: shutdown. 0.7 V < EN/UVLO < 1.23 V: standby (VCC regulator on, PWM off). EN/UVLO > 1.23 V: PWM enabled (provided VCC exceeds its UV threshold)."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin to the IC. Connect to a supply voltage between 3.5 V and 42 V (60 V absolute max)."
      },
      {
        "number": "3",
        "name": "VISNS",
        "type": "input",
        "description": "VIN sense input. Connect to the input capacitor."
      },
      {
        "number": "4",
        "name": "MODE",
        "type": "input",
        "description": "Operating mode select via RMODE resistor to GND or VCC. Options: GND=DCM/hiccup disabled; 49.9 kΩ to GND=DCM/hiccup enabled; 93.1 kΩ to GND=CCM/hiccup enabled; tied to VCC=CCM/hiccup disabled."
      },
      {
        "number": "5",
        "name": "DITH",
        "type": "input",
        "description": "Dithering programming pin. A capacitor between DITH and AGND is charged/discharged by a 10 µA current source, modulating fSW by ±5%. Ground DITH to disable dithering; in external sync mode DITH is ignored."
      },
      {
        "number": "6",
        "name": "RT/SYNC",
        "type": "input",
        "description": "Switching-frequency programming / external clock sync pin. Resistor from RT/SYNC to AGND sets fSW (100-600 kHz); can also be driven by an external clock for synchronization."
      },
      {
        "number": "7",
        "name": "SLOPE",
        "type": "passive",
        "description": "Slope-compensation programming pin. A capacitor between SLOPE and AGND provides the slope-compensation ramp for stable current-mode operation in both buck and boost modes."
      },
      {
        "number": "8",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start programming pin. A capacitor between SS and AGND programs the soft-start time (charged by ~5.65 µA)."
      },
      {
        "number": "9",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output. External RC network between COMP and AGND compensates the regulator feedback loop."
      },
      {
        "number": "10",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference for the IC. Tie to the system ground plane; also the return for the exposed PowerPAD."
      },
      {
        "number": "11",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin for output voltage regulation. Connect a resistor divider from VOUT to FB; internal reference is 0.800 V. OVP triggers at ~0.86 V, PGOOD window ±10%."
      },
      {
        "number": "12",
        "name": "VOSNS",
        "type": "input",
        "description": "VOUT sense input. Connect to the output capacitor for output-side sensing."
      },
      {
        "number": "13",
        "name": "ISNS(-)",
        "type": "input",
        "description": "Negative input of the average current-sense amplifier. Used with ISNS(+) across an optional current-sense resistor on the input or output side for constant-current (CC) control. Short ISNS(+) and ISNS(-) together to disable."
      },
      {
        "number": "14",
        "name": "ISNS(+)",
        "type": "input",
        "description": "Positive input of the average current-sense amplifier. CC loop activates when VISNS(+)-ISNS(-) reaches ~50 mV (average current-limit target)."
      },
      {
        "number": "15",
        "name": "CSG",
        "type": "input",
        "description": "Negative (ground) input of the PWM current-sense amplifier. Connect directly to the low-side ground of the current-sense resistor."
      },
      {
        "number": "16",
        "name": "CS",
        "type": "input",
        "description": "Positive input to the PWM current-sense amplifier. Senses inductor/switch current for cycle-by-cycle peak current-mode control."
      },
      {
        "number": "17",
        "name": "PGOOD",
        "type": "output",
        "description": "Power-Good open-drain output. Pulled low when FB is outside a 0.8 V ±10% regulation window. Sink capability ~4.2 mA at 0.4 V; requires external pull-up."
      },
      {
        "number": "18",
        "name": "SW2",
        "type": "power_out",
        "description": "Boost-side switching node. Connect to the inductor and the source of the high-side boost MOSFET / drain of the low-side boost MOSFET. Also the SW reference for BOOT2/HDRV2."
      },
      {
        "number": "19",
        "name": "HDRV2",
        "type": "output",
        "description": "High-side gate-driver output for the boost-side MOSFET. Peak source/sink ~1.8 A / 2.2 A; connect directly to the MOSFET gate."
      },
      {
        "number": "20",
        "name": "BOOT2",
        "type": "power_in",
        "description": "Bootstrap supply for the boost-side high-side gate driver. Connect a capacitor between BOOT2 and SW2; 68 V absolute max to GND."
      },
      {
        "number": "21",
        "name": "LDRV2",
        "type": "output",
        "description": "Low-side gate-driver output for the boost-side MOSFET. Connect directly to the MOSFET gate; referenced to PGND."
      },
      {
        "number": "22",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground of the IC. High-current ground return for the low-side gate drivers."
      },
      {
        "number": "23",
        "name": "VCC",
        "type": "power_out",
        "description": "Output of the internal VCC bias regulator (~7.35 V typ). Bypass with a capacitor to ground; supplies the gate drivers and internal analog."
      },
      {
        "number": "24",
        "name": "BIAS",
        "type": "power_in",
        "description": "Optional input to the VCC bias regulator. Powering VCC from an external supply (rather than VIN) reduces power loss at high VIN. For VBIAS > ~8 V the VCC regulator draws from BIAS. VBIAS must not exceed 40 V."
      },
      {
        "number": "25",
        "name": "LDRV1",
        "type": "output",
        "description": "Low-side gate-driver output for the buck-side MOSFET. Connect directly to the MOSFET gate; referenced to PGND."
      },
      {
        "number": "26",
        "name": "BOOT1",
        "type": "power_in",
        "description": "Bootstrap supply for the buck-side high-side gate driver. Connect a capacitor between BOOT1 and SW1; 68 V absolute max to GND."
      },
      {
        "number": "27",
        "name": "HDRV1",
        "type": "output",
        "description": "High-side gate-driver output for the buck-side MOSFET. Peak source/sink ~1.8 A / 2.2 A; connect directly to the MOSFET gate."
      },
      {
        "number": "28",
        "name": "SW1",
        "type": "power_out",
        "description": "Buck-side switching node. Connect to the inductor and the source of the buck-side high-side MOSFET / drain of the buck-side low-side MOSFET. Also the SW reference for BOOT1/HDRV1."
      },
      {
        "number": "29",
        "name": "PAD",
        "type": "power_in",
        "description": "Exposed thermal PowerPAD on the underside of the HTSSOP-28 package. Solder to the analog ground copper pour and use thermal vias to an internal ground plane for heat dissipation."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm5175pwpr.pdf",
        "pages": 42,
        "sha256": "c2cf8e014f0da459",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm5175pwpr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          9.7,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b9e231ffd0dc17d13a174b875c5ed26e9f28ef12dd003623bb416f5f955fe0a6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm5175pwpr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          9.7,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c69b258b6bc38bc73c8d8490b98121afdd45b87a5d09fc8314cb1a4b998dcf81",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-28",
      "Category": "PMIC",
      "Pins": "29"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lm5175pwpr"
  ],
  "discovery_pitch": "LM5175PWPR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm5175pwpr.kicad_sym",
    "lm5175pwpr.kicad_mod",
    "lm5175pwpr.glb",
    "lm5175pwpr.step",
    "lm5175pwpr.lbr",
    "docs/hero.png",
    "docs/lm5175pwpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm5175pwpr-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "LM5175PWPR",
      "kind": "packaging"
    },
    {
      "mpn": "LM5175PWPRRHF",
      "kind": "packaging"
    },
    {
      "mpn": "LM5175PWPRRHFR",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-28T17:03:44.520Z"
}