← Commit history

Initial commit: component/lm5164ddat

Ray ·43ad58ccc8 ·
2 files changed +188
README.mdadded+45
@@ -0,0 +1,45 @@+# LM5164DDAT++**Texas Instruments** · DC-DC Converters · SO-8++LM5164DDAT from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground connection for internal circuits. |+| 2 | VIN | power_in | Regulator power supply input (6V to 100V) for high-side MOSFET and internal bias regulator; connect via short low-impedance path to converter input. |+| 3 | EN/UVLO | input | Precision enable and undervoltage lockout input with 1.1V shutdown and 1.5V enable threshold for programmable input voltage lockout protection. |+| 4 | RON | input | On-time programming input; resistor between this pin and GND sets buck switch on-time from 50ns minimum to 10000ns maximum. |+| 5 | FB | input | Feedback input for output voltage regulation comparator; regulation reference voltage 1.181V to 1.218V. |+| 6 | PGOOD | output | Open-drain power good indicator output requiring external pull-up resistor (10kΩ to 100kΩ) to voltage ≤14V; asserts when output voltage in regulation. |+| 7 | BST | output | Bootstrap gate drive power output; requires 2.2nF 50V X7R ceramic capacitor connected between BST and SW to bias internal high-side MOSFET gate driver. |+| 8 | SW | output | Switch node output (maximum switching frequency 1MHz) connected to high-side NMOS buck switch source and low-side NMOS synchronous rectifier drain; connect to power inductor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SO-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `LM5164DDAT`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SO-8 (KiCad packages3D, STEP)+- 3D model files: `lm5164ddat-etched.step` / `lm5164ddat-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm5164ddat.step` / `lm5164ddat.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm5164) (38 pp, sha256 `863a4e9bf023f018`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm5164ddat-datasheet.pdf)
page.jsonadded+143
@@ -0,0 +1,143 @@+{+  "slug": "lm5164ddat",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "lm5164ddat",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lm5164ddat.kicad_sym",+    "lm5164ddat.kicad_mod",+    "lm5164ddat.glb",+    "lm5164ddat.step",+    "lm5164ddat.lbr",+    "docs/hero.png",+    "docs/lm5164ddat-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LM5164DDAT",+    "manufacturer": "Texas Instruments",+    "package": "SO-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lm5164",+    "parts": {+      "symbol": "lm5164ddat.kicad_sym",+      "footprint": "lm5164ddat.kicad_mod",+      "model_3d": "lm5164ddat-etched.glb",+      "model_3d_plain": "lm5164ddat.glb",+      "model_3d_step": "lm5164ddat-etched.step",+      "model_3d_step_plain": "lm5164ddat.step",+      "lbr": "lm5164ddat.lbr"+    },+    "distributor_links": {+      "lcsc": "C2071198"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection for internal circuits."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Regulator power supply input (6V to 100V) for high-side MOSFET and internal bias regulator; connect via short low-impedance path to converter input."+      },+      {+        "number": "3",+        "name": "EN/UVLO",+        "type": "input",+        "description": "Precision enable and undervoltage lockout input with 1.1V shutdown and 1.5V enable threshold for programmable input voltage lockout protection."+      },+      {+        "number": "4",+        "name": "RON",+        "type": "input",+        "description": "On-time programming input; resistor between this pin and GND sets buck switch on-time from 50ns minimum to 10000ns maximum."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback input for output voltage regulation comparator; regulation reference voltage 1.181V to 1.218V."+      },+      {+        "number": "6",+        "name": "PGOOD",+        "type": "output",+        "description": "Open-drain power good indicator output requiring external pull-up resistor (10kΩ to 100kΩ) to voltage ≤14V; asserts when output voltage in regulation."+      },+      {+        "number": "7",+        "name": "BST",+        "type": "output",+        "description": "Bootstrap gate drive power output; requires 2.2nF 50V X7R ceramic capacitor connected between BST and SW to bias internal high-side MOSFET gate driver."+      },+      {+        "number": "8",+        "name": "SW",+        "type": "output",+        "description": "Switch node output (maximum switching frequency 1MHz) connected to high-side NMOS buck switch source and low-side NMOS synchronous rectifier drain; connect to power inductor."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 38,+        "cost_usd": 0.4035,+        "at": "2026-09-23T17:40:49"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lm5164",+        "pages": 38,+        "sha256": "863a4e9bf023f018",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file