component
LM5164DDAT
Public Made by Adomby adom
Texas Instruments DC-DC Converters, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM5164DDAT
Texas Instruments · DC-DC Converters · SO-8
LM5164DDAT from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection for internal circuits. |
| 2 | VIN | power_in | Regulator power supply input (6V to 100V) for high-side MOSFET and internal bias regulator; connect via short low-impedance path to converter input. |
| 3 | EN/UVLO | input | Precision enable and undervoltage lockout input with 1.1V shutdown and 1.5V enable threshold for programmable input voltage lockout protection. |
| 4 | RON | input | On-time programming input; resistor between this pin and GND sets buck switch on-time from 50ns minimum to 10000ns maximum. |
| 5 | FB | input | Feedback input for output voltage regulation comparator; regulation reference voltage 1.181V to 1.218V. |
| 6 | PGOOD | output | Open-drain power good indicator output requiring external pull-up resistor (10kΩ to 100kΩ) to voltage ≤14V; asserts when output voltage in regulation. |
| 7 | BST | output | Bootstrap gate drive power output; requires 2.2nF 50V X7R ceramic capacitor connected between BST and SW to bias internal high-side MOSFET gate driver. |
| 8 | SW | output | Switch node output (maximum switching frequency 1MHz) connected to high-side NMOS buck switch source and low-side NMOS synchronous rectifier drain; connect to power inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM5164DDAT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm5164ddat-etched.step/lm5164ddat-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm5164ddat.step/lm5164ddat.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
863a4e9bf023f018, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).