main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs lm5160qpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm5160qpwprq1: one-pass backfill (courtyard 44.24 -> 42.0 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chan… · Ray
lm5160qpwprq1-etched.fit.json lm5160qpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5160qpwprq1-etched.glb lm5160qpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5160qpwprq1-etched.step lm5160qpwprq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm5160qpwprq1-hero.glb lm5160qpwprq1: hero from the plain model · Ray
lm5160qpwprq1-hero.overlay.json lm5160qpwprq1: hero from the plain model · Ray
lm5160qpwprq1.glb Publish 0.1.0 · Ray
lm5160qpwprq1.kicad_mod lm5160qpwprq1: one-pass backfill (courtyard 44.24 -> 42.0 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chan… · Ray
lm5160qpwprq1.kicad_sym Publish 0.1.0 · Ray
lm5160qpwprq1.lbr lm5160qpwprq1: one-pass backfill (courtyard 44.24 -> 42.0 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chan… · Ray
lm5160qpwprq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lm5160qpwprq1: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM5160QPWPRQ1

Texas Instruments · DC-DC Converters · HTSSOP-14-EP

LM5160QPWPRQ1 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AGND power_in Analog Ground. Ground connection of internal control circuits. Should be tied to the exposed thermal pad and to the PCB ground plane.
2 PGND power_in Power Ground. Ground connection of the internal low-side synchronous rectifier FET; carries the switching current return.
3 VIN power_in Input supply connection. Operating input voltage range is 4.5 V to 65 V (absolute max 70 V). Requires local input decoupling capacitance.
4 EN/UVLO input Precision enable / undervoltage lockout comparator input. Used to enable the converter and to set the input UVLO threshold and hysteresis via an external resistor divider from VIN.
5 RON input On-time programming pin. A resistor between this pin and VIN sets the switch on-time as a function of input voltage, producing nearly constant switching frequency up to 1 MHz.
6 SS input Soft-start. Connect a capacitor from SS to AGND to control the output voltage rise time at start-up and limit inrush/overshoot.
7 NC unconnected No Connection. Leave floating or tie to AGND per layout guidelines.
8 FPWM input Forced PWM logic input pin. Tie to AGND for discontinuous conduction mode (DCM) at light load for higher efficiency; tie to VCC for continuous conduction mode (CCM) at all loads (required for Fly-Buck configuration). Absolute max 14 V.
9 FB input Feedback input of the voltage regulation comparator. Connect the output voltage divider tap here; internal reference gives ±1% regulation.
10 VCC power_out Internal high-voltage start-up regulator bypass capacitor pin. Provides the internal bias rail (nominal ~7 V, absolute max 14 V); bypass to AGND with a ceramic capacitor. Do not load externally beyond datasheet limits.
11 BST power_in Bootstrap capacitor pin for the high-side buck FET gate driver. Connect a capacitor between BST and SW (typ. 0.1 µF). Absolute max 14 V above SW, 84 V above AGND.
12 SW power_out Switch node. Source of the high-side buck FET and drain of the low-side synchronous rectifier FET. Connects to the external inductor; carries the switching waveform.
13 SW power_out Switch node (duplicate of pin 12). Source of the high-side buck FET and drain of the low-side synchronous rectifier FET.
14 NC unconnected No Connection. Leave floating or tie to AGND per layout guidelines.
15 EP power_in Exposed thermal pad on the underside of the HTSSOP package. Connect to AGND and to the PCB ground plane to improve power dissipation; this is the primary thermal path.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category PMIC
Pins 15

Ordering variants

  • LM5160QPWPRQ1QPWPQ1
  • LM5160QPWPRQ1
  • LM5160QPWPRQ1QPWPTQ1

CAD (KiCad official)

  • Symbol: LM5160QPWPRQ1
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: lm5160qpwprq1-etched.step / lm5160qpwprq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5160qpwprq1.step / lm5160qpwprq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 8402782c9ba13b0c, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF